Sant Longowal Institute of Engineering and Technology Tender Results | Bidders, AOC & Contract Value | Tenderbook

TENDERBOOK

🎉 Your free trial plan has started. Plan will expire in 0 days

sant longowal institute of engineering and technologyauthorities

Sant Longowal Institute of Engineering and Technology Tender Results | Bidders, AOC & Contract Value | Tenderbook

Sant Longowal Institute Of Engineering And Technology

Sant Longowal Institute Of Engineering And Technology has published Bids Are Invited For Custom Bid For Services - Amc Of Wi-Fi System. Last date of submission for this tender is 2026-04-27. This is a Network Routers tender in Longowal, Punjab

Longowal, Punjab

It And Telecommunications

Amount

₹6.24 Lac

Contract date

Sant Longowal Institute Of Engineering And Technology

Sant Longowal Institute Of Engineering And Technology has published Bids Are Invited For Manpower Outsourcing Services - Minimum Wage - Skilled; High School; Others , Manpower Outsourcing Services - Minimum Wage - Semi-Skilled; Not Required; Others , Manpower Outsourcing Services - Minimum Wage - Unskilled; Not Required; Others. Last date of submission for this tender is 2026-02-23. This is a Man Power Supply tender in Barnala, Punjab

Barnala, Punjab

Amount

₹62.92 Lac

Contract date

Sant Longowal Institute Of Engineering And Technology

Sant Longowal Institute Of Engineering And Technology has published Bids Are invited for Peristaltic Pump - Peristaltic pump with high accuracy motors and a graphical interface.Graphical LCD should be showing four operating modes continuous run, timed dispense, copy dispense, volume dispense. Pump should be capable to handle abrasive slurries, viscous fluids, and corrosive fluids with minimal wear.The system should have menu driven interface for programming & operation.The variable speed control of pump should be 0.1 to 600 rpm.Motor should be brushless and maintenance free and should provide ±0.1% speed control accuracy. Anti-drip function to ensure the dispensing accuracy.Motor should be reversible to purge tubing before or after pumping.Timer:1 sec to 99 hrs.Motor should accept up to two pump heads and two pump heads should be provided with the motor to facilitate the two experiments simultaneously. Flow rate of system should be 0.001 ml - 3000ml/min or better. Fluid contact should only with the tubing and should not be contactable with pump head and drive.Pump head should be capable to accept various tubing sizes to cater the minimum or maximum flow rate.Tubing should be provided to facilitate the flow rate 1 ml to 1500ml/min.Tubing and tube materials should be compatible with the chemicals & suitable for food and pharmaceutical use and compliance with RoHS & IP 33 safety ratings.Power 220 VAC or 50 Hz. System should be CE compliance.Warranty: two years or more. Total Quantity : 1. Last date of submission for this tender is 2021-10-20. This is a Miscellaneous Fasteners tender in null, Punjab

Machinery And Tools

Amount

₹3.78 Lac

Contract date

Sant Longowal Institute Of Engineering And Technology

Sant Longowal Institute Of Engineering And Technology has published Bids Are Invited For Reverse Osmosis Based Water Treatment System Above 50 Lph Capacity (V2) (Q2) Total Quantity : 15. Last date of submission for this tender is 2026-02-24. This is a Water Treatment Plant tender in Barnala, Punjab

Barnala, Punjab

Amount

₹10.13 Lac

Contract date

Sant Longowal Institute Of Engineering And Technology

Sant Longowal Institute Of Engineering And Technology has published Exterior Repair/Renovation In Boys Hostel No. 10 At Sliet, Longowal. Last date of submission for this tender is 2022-12-10. This is a Building Work tender in Longowal, Punjab

Longowal, Punjab

Amount

Refer Docs

Contract date

Sant Longowal Institute Of Engineering And Technology

Sant Longowal Institute Of Engineering And Technology has published Spares Parts Of Water Purifieds - Supply Of Spares For 25 / 50 Lph Water Purifiers ( Commercial ) Make Eureka Forbes At Sliet, Longowal For The F / Y 2023-24. Last date of submission for this tender is 2023-07-03. This is a Water Purifier tender in Longowal, Punjab

Longowal, Punjab

Electronic Products And Appliances

Amount

Refer Docs

Contract date

Sant Longowal Institute Of Engineering And Technology

Sant Longowal Institute Of Engineering And Technology has published Tender For Electrical Material - Supply Of Electrical Material For Annual Repair And Maintenance At Sliet, Longowal For The F / Y 2023-24. Last date of submission for this tender is 2023-07-03. This is a Electrical Products tender in Longowal, Punjab

Longowal, Punjab

Electrical Industry

Amount

Refer Docs

Contract date

Sant Longowal Institute Of Engineering And Technology

Sant Longowal Institute Of Engineering And Technology has published Hardware Material - Supply Of Hardware Material For Annual Repair And Maintenance For F / Y 2023-24. Supply Of Oxidised Mild Steel Hasp And Staples ( Safety Type ) 115 Mm Of Approved Quality. Each 1 2 Supply Of Oxidised Mild Steel Screws ( Pkt. Of 200 Nos. ) ( Netle F&D Make Or Equivalent ) 20 Mm Pkt. 41 25 Mm Pkt. 20 30 Mm Pkt. 26 35 Mm Pkt. 39 50 Mm Pkt. 2 60 Mm Pkt. 1 75 Mm Pkt. 2 3 Supply Of Ss Screws ( Pkt. Of 200 Nos. ) ( Netle F&D Make Or Equivalent ) 20 Mm Pkt. 1 25 Mm Pkt. 1 32 Mm Pkt. 1 4 Supply Of Black Screws ( Pkt. Of 200 Nos. ) ( Netle F&D Make Or Equivalent ) 20 Mm Pkt. 1 25 Mm Pkt. 1 5 Supply Of Chipboard Screws ( Pkt. Of 200 Nos. ) ( Patta, Omni Make Or Equivalent ) A ) 3.5 X 20 Mm Pkt. 1 B ) 3.5 X 25 Mm Pkt. 1 C ) 3.5 X 32 Mm Pkt. 1 D ) 3.5 X 38 Mm Pkt. 1 E ) 3.5 X 50 Mm Pkt. 1 F ) 3.5 X 60 Mm Pkt. 1 G ) 3.5 X 75 Mm Pkt. 1 6 Supply Of Oxidised Mild Steel Sliding Door Bolt Of Approved Quality. 250 X16 Mm Each 21 300 X16 Mm Each 10 7 Supply Of Oxidised Mild Steel Handles Of Approved Quality. 100 Mm Each 59 125 Mm Each 35 8 Supply Of Anodised Aluminium Tower Bolt ( Barrel Type ) Of Approved Quality. 100X10 Mm Each 48 150X10 Mm Each 99 200X10 Mm Each 79 250X10 Mm Each 19 300X10 Mm Each 1 9 Supply Of Aluminum Sliding Door Bolt Of Approved Quality. 250 X16 Mm Each 1 300 X16 Mm Each 1 10 Supply Of Oxidised Mild Steel Tower Bolt ( Barrel Type ) 100X10 Mm Each. 65 150X10 Mm Each. 7 200X10 Mm Each. 40 11 Supply Of Anodised Aluminum Handles Of Approved Quality. 75 Mm Each 1 100 Mm Each 24 125 Mm Each 35 150 Mm Each 1 12 Supply Of Plywood Water Proof ( Make Green, Duro, Century, Archidply, Modiply & Evergreen ) 06 Mm Sqm 24 09 Mm Sqm 3 12 Mm Sqm 63 18 Mm / 19 Mm Sqm 140 13 Supply Of Marandi / Red Champ Cut To Size Including Grooving & Finishing All Respect ( Well Seasoned ) Cft 139 14 Supply Of Second Class Teak Wood Cut To Size Including Grooving & Finishing All Respect ( Well Seasoned ) Cft 5 15 Supply Of Teak Plywood ( Make Internet Maxima & Sanik, Green, National Or Equivalent ) 04 Mm Sq. Ft. 32 06 Mm Sq. Ft. 9 12 Mm Sq. Ft. 32 16 Supply Of Marandi Wood Beading Finishing All Respect ( Well Seasoned ) 1 / 2 X 3 / 4 Rmt 379 1.1 / 2 X 1 / 2 Rmt 3 17 Supply Of Sunmica Sheet ( 8 X 4 ) As Per Sample Or Approved Quality. ( Make Green, Duro, Century, Archidply, Modiply & Evergreen ) 0.8 Mm Sqm. 2 01 Mm Sqm. 56 18 Supply Of Masking Tape Each 17 19 Supplying Of Panelled Shutter For Doors Including Isi Marked Black Enamelled M.S. Butt Hinges With Necessary Screw, Including Panelling Of 12 Mm Thick Water Proof Ply. Kiln Seasoned And Chemically Treated Hollock Wood. 30 Mm Thick Shutter. Sqm. 147 20 Supply Of Block Board Construction Flush Door With Teak Wood Ply On Both Faces 30 Mm Thick Of Approved Quality. Sqm. 68 21 Supply Of Wire Gauge Shutters Using Galvanized M.S. Wire Gauge Of Average Width Of Aperture 1.4 Mm In Both Directions With Wire Of Dia 0.63 Mm, For Doors, Windows And Clerestory Windows With Hinges And Necessary Screws 35Mm Thick Shutters Kilin Seasoned And Chemically Treated Hollock Wood Sqm. 35 22 Supply Of Pvc Door Shutter As Per Is , Specification Of Sintax, Rajshiri Or Make Or Equivalent Sqm. 5 23 Supply Of Wood Primer ( Nerolac, Asian, Burger, Dulux Or Equivalent ) Of Approved Quality. Ltr. 127 24 Supply Of Water Based Exterior Primer ( Nerolac, Asian, Burger, Dulux Or Equivalent ) Ltr. 1 25 Supply Of Red Oxide Primer ( Nerolac, Asian, Burger, Dulux Or Equivalent ) 1 26 Supply Of Synthetic Enamel Paint ( Nerolac, Asian, Burger, Dulux Or Equivalent ) Of Approved Quality. Ltr. 290 27 Supply Of Terracotta Paint ( Nerolac, Asian, Burger, Dulux Or Equivalent ) Of Approved Quality. Ltr. 1 28 Supply Of Acrylic Smooth Exterior Paint ( Nerolac, Asian, Burger, Dulux Or Equivalent ) Of Approved Quality. Ltr. 41 29 Supply Of Plastic Emulsion Paint ( Nerolac, Dulux, Asian, Burger, Dulux Or Equivalent Make ) Ltr. 27 30 Supply Of Touch Wood Polish ( Nerolac, Asian, Burger, Dulux Or Equivalent ) Of Approved Quality. Ltr. 4 31 Supply Of Turpentine Oil Of Approved Quality. Ltr. 141 32 Supply Of Spirit Of Approved Quality. Ltr. 1 33 Supply Of Colure Tube ( 100Mm ) Each 10 34 Supply Of Paint Roller ( Size 10” ) Each 1 35 Supply Of Thinner Ltr. 1 36 Supply Of Silicone Ltr. 1 37 Supply Of Siller Ltr. 1 38 Supply Of Seedlac ( Lakh Dana ) Of Approved Quality. Kg. 1 39 Supply Of Putting Patti Of Approved Quality. Each. 3 40 Supply Of Malmal / Mulmul Cloth Of Approved Quality. Mtr. 6 41 Supply Of Lime ( As Per Approved Sample ) Kg. 512 42 Supply Of Indigo ( Neel ) ( As Per Approved Sample ) Kg. 5 43 Supply Of Ddl ( Fevicol ) ( As Per Approved Sample ) Kg. 8 44 Supply Of Drawer Roller Wheel ( As Per Approved 1 Per Inch 1 2 Per Inch 1 45 Supply Of Bt Waterproof Sand Paper ( Regmar ) Mtr. 28 46 Supply Of Emery Paper / Regmar / Sand Paper Water Proof Of Approved Quality. 150 No. Each. 20 220 No. Each. 11 320 No. Each. 8 420 No. Each. 1 47 Supply Of Chawk Mitti ( As Per Approved Sample ) Kg. 6 48 Supply Of Brown Mitti ( As Per Approved Sample ) Pkt. 3 49 Supply Of Yellow Mitti ( As Per Approved Sample ) Pkt. 2 50 Supply Of Oil Bond Distemper ( Nerolac, Dulux, Asian, Burger Or Equivalent Make ) Kg. 397 51 Supply Of Walnut Wood Stain Colors Ltr. 1 52 Supply Of J.K. Or Birla Wall Care Putty Of Approved Quality. Kg. 494 53 Supply Of Glass Putty ( Asian, Amco Or Equivalent ) Kg. 1014 54 Supply Of Ms Putty ( As Per Approved Sample ) Kg. 1 55 Supply Of Paint Brush ( Aman Make Or Equivalent ) A ) 2 Each 1 B ) 3 Each 41 C ) 4 Each 11 56 Supply Of Glass Plain ( Tata, Saint -Gobain, Modi Make Or Equivalent ) 4 Mm Sqm 255 5 Mm Sqm 1 57 Supply Of Frosted Glass Sheet Of Nominal Thickness 4 Mm ( Weighing Not Less Than 10 Kg / Sqm ) ( Tata, Saint -Gobain, Modi Make Or Equivalent ) Sqm 6 58 Supply Of Green Glass 5Mm Thick ( Tata, Saint - Gobain, Modi Make Or Equivalent ) Sqm 1 59 Supply Of Glass Rubber ( As Per Approved Sample ) Kg. 64 60 Supply Of Aluminum Section Body Hydraulic Door Closer Tubular Type ( Godrej Or Hardwyn, Speed Hydraulic 60 Kg Door Closer ( Silver Or Equivalent ) Each 27 61 Supply Of Aluminum Hanging Floor Door Stopper With Twin Rubber & Stopper Or As Per Sample Of Approved Quality. Each 151 62 Supply Of Oxidised M.S. Casement Stays ( Straight Peg Type ) Of Approved Quality. 200 Mm Not Less Than 0.24 Kg Each 71 250 Mm Not Less Than 0.28 Kg Each 130 300 Mm Not Less Than 0.33 Kg Each 1 63 Supply Of M.S. Oxidized Window Handle Left & Right Of Approved Quality. Each. 230 64 Supply Of Nails Mix Kg. 75 65 Supply Of Gul Mekh Each 1 66 Supply Of Ms Door Spring ( Sandu, Everest Or Equivalent ) Each. 11 67 Supply Of Ms Windows’S Hinges Of Approved Quality. Each 85 68 Supply Of Ms Eye Hook Of Approved Quality. Each. 49 69 Supply Of M.S. Piano Hinges 3 / 4 X 6 ( Heavy Duty ) Of Approved Quality. Each. 2 70 Supply Of Hold Fast With 4 Kabla Of Approved Quality. Each 85 71 Supply Of 100 Mm Mortice Lock With 6 Levers For Door Or As Per Sample Of Approved Quality. ( Godrej, Hardwyn, Ozone, Everite, Dorset & Hettich ) Each 10 72 Supply Of Ss Hinges 4 ( Jolly Or Equivalent ) Each. 25 73 Supply Of Ss Hinges 3 ( Jolly Or Equivalent ) Each. 30 74 Supply Of Ms Hinges 4 ( Good Quality ) Each. 141 75 Supply Of Ms Hinges 3 ( Good Quality ) Each. 162 76 Supply Of Double Action Hinges Of Approved Quality. Each. 3 77 Supply Of Looking Mirror Back Seat Of Approved, etc.. Refer the document form mere details. Last date of submission for this tender is 2023-06-29. This is a Brushes tender in Longowal, Punjab

Longowal, Punjab

Machinery And Tools

Amount

Refer Docs

Contract date

Sant Longowal Institute Of Engineering And Technology

Sant Longowal Institute Of Engineering And Technology has published Provision Of Pedestrian Pathways I.E. Director Residence / Guest House To Library Building, Library To Food And Chemical Block, Library To Sac Building, Mechanical Building To Sac Building At Sliet, Longowal. Last date of submission for this tender is 2024-01-29. This is a Footpath Work tender in Longowal, Punjab

Longowal, Punjab

Amount

Refer Docs

Contract date

Sant Longowal Institute Of Engineering And Technology

Sant Longowal Institute Of Engineering And Technology has published Tender For Repair /Renovation Of Bathrooms Of Girls Hostel No.02 At Sliet, Longowal. Last date of submission for this tender is 2026-03-11. This is a Toilet Bathroom tender in Barnala, Punjab

Barnala, Punjab

Amount

Refer Docs

Contract date

Disclaimer: Tenderbook takes every possible care to ensure the accuracy and authenticity of the tender information published on the platform. However, users are requested to verify the details from the original Tender Notice or Tender Document issued by the respective tendering authority before making any decisions or taking action related to a tender. We are not liable for any loss or damages arising from its use. For any corrections or feedback, connect with us at contact@tenderbook.in