Lanco Teesta Hydro Power Limited Tender Results | Bidders, AOC & Contract Value | Tenderbook

TENDERBOOK

🎉 Your free trial plan has started. Plan will expire in 0 days

lanco teesta hydro power limitedauthorities

Lanco Teesta Hydro Power Limited Tender Results | Bidders, AOC & Contract Value | Tenderbook

Lanco Teesta Hydro Power Limited

Lanco Teesta Hydro Power Limited has published Slope Protection Works Adjacent To Area Near Adit-Iv And Adit-Iv A And Trimming And Levelling Of All Adits , Construction Adits In Power House Complex And Jungle Cutting / Grass Removal Etc In And Around Power House Complex. Last date of submission for this tender is 2021-07-30. This is a Flood Protection tender in Power House Complex, Tarkhola, South Sikkim, Sikkim

Power House Complex, Tarkhola, South Sikkim, Sikkim

Amount

₹17.85 Lac

Contract date

08/10/2021

Lanco Teesta Hydro Power Limited

Lanco Teesta Hydro Power Limited has published Construction Of Security Check Post Near Power House Complex Main Gate, Pamphok, South Sikkim. Last date of submission for this tender is 2023-04-03. This is a Building Work tender in Singtam, Sikkim

Singtam, Sikkim

Amount

Refer Docs

Contract date

Lanco Teesta Hydro Power Limited

Lanco Teesta Hydro Power Limited has published Repair And Renovation Of Right Bank Executive Field Hostel Teesta Vi Hep At Balutar. Last date of submission for this tender is 2022-06-02. This is a Canal Construction tender in Singtam, Sikkim

Singtam, Sikkim

Amount

Refer Docs

Contract date

Lanco Teesta Hydro Power Limited

Lanco Teesta Hydro Power Limited has published Bids Are Invited For Telecommunication Cable - Fully Filled (Petroleum Jelly Or Absorbent Thixotropic Gel) (Q3) Mse Total Quantity : 400. Last date of submission for this tender is 2024-04-09. This is a Telecommunications Cable tender in East sikkim, Sikkim

East sikkim, Sikkim

Electrical Industry

Amount

₹5.66K

Contract date

Lanco Teesta Hydro Power Limited

Lanco Teesta Hydro Power Limited has published Repair And Renovation Of 6 Nos. Type-I Quarters At Teesta-Vi Hep, Balutar Repair And Renovation Of 6 Nos. Type-I Quarters At Teesta-Vi Hep, Balutar. Last date of submission for this tender is 2022-02-07. This is a Building Repair tender in Lthpl, Balutar, Singtam, East Sikkim, Sikkim

Lthpl, Balutar, Singtam, East Sikkim, Sikkim

Amount

Refer Docs

Contract date

Lanco Teesta Hydro Power Limited

Lanco Teesta Hydro Power Limited has published Tender For Restoration Of 11 Kv Power Supply At Power House Area, Pamphok. Last date of submission for this tender is 2024-07-12. This is a Power Supply Unit tender in East Sikkim, Sikkim

East Sikkim, Sikkim

Electrical Industry

Amount

Refer Docs

Contract date

Lanco Teesta Hydro Power Limited

Lanco Teesta Hydro Power Limited has published Tender For Repair And Renovation Of Type-Iii Qtrs Under Possession Of Teesta-Vi He Project At Balutar ; 1 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. 2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm 3 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 4 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metre lead as per direction of Engineer-in-charge: Up to 150 mm diameter. 5 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. Complete 6 Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm 7 Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) Size of Tile 600x600 mm 8 Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600 x 600 mm 9 Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 10 Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) 11 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 12 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : 13.43.1 Water thinnable cement primer. 13 Providing and painting with plastic Emulsion paints two or more coats on New surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete. 14 Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including cleaning the surface complete on old surface. 15 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead Of area 3 sq. metres and below 16 Providing, fitting and fixing of undressed local timber (tooni, katus equivalent) in all types of frames complete. With locally available timber 17 Providing, fitting and fixing water proof flush door shutters, solid block hardcore construction with frame of 1st class hard timber with wel lmatched 3mm teak ply decorative type on one faces of the shutters including hinges with screws complete. 32mm 18 Providing, fitting and fixing. Tower bolts 150x10mm with necessary screw etc complete. MS 19 Providing, fitting and fixing handles 125mm size with necessary screws etc complete.MS 20 Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes (weights not less than 10 kg/ sqm) 21 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete:With 12 mm mild steel U beading. 22 Providing and fixing fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading. 23 Providing and Laying in position cement concrete of specified grade including compacting curing etc all complete. 1:2:4 mix.(1 cement, 2 coarse sand, 4 graded stone aggregate of 20mm & down size). 24 Providing and fixing 100mm mortise lock with 6 levers and pair of handles with necessary screws etc complete-Brass (C.P) 25 Providing, fitting and fixing. sliding door bolts with nuts and screws etc. complete-Size 300x16mm with Aluminum Oxidized. 26 Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT) BIB COCK 15 MM DIA 27 Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT)ANGULAR STOP COCK15 MM DIA 28 Providing, fitting and fixing Beveled gauge mirror of superior glass with 6mm A.C. sheets ground and fixed to timber cleats with CP screws, washer etc complete. 29 Providing, fitting and fixing. of chromium plated soap dish with necessary screw etc all complete. 30 Providing, fitting and fixing towel rail of chromium plated brass complete with brackets fixed to the timber cleats, CP brass screws complete-740 x 20 mm 31 Providing, fitting and fixing towel ring of chromium plated brass complete with CP brass screw and timber cleats. 32 Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. 33 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. 34 Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer 35 Providing, fitting and fixing white vitreous china pedestal (European type) water closet (W.C) pan with seat and lid, with C.P. brass hinges, 10ltr low level cistern with fittings and brackets 40mm flush bend, 20mm overflow pipe with specials, including Providing and painting and making good the wall and floors as required all complete: W.C. pan W.C. pan European Bidets constellation CAT NO 30006 36 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, 20 mm nominal dia Pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete. Concealed work, including cutting chases and making good the walls etc. as perdirection of Engineer in Charge . 37 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge:40 mm nominal dia Pipes 38 Providing, fitting and fixing soil, waste and vent pipes including testing etc complete. 75 mm dia. PRINCE / SUPREME soil Pipe 39 Providing, fitting and fixing bends of various types plain or a band with access door, insertion rubber washer 3rnm thick bolts and nuts complete SCI or centrifugally cost spun sands pipes-75 mm dia. Supreme / Prince 40 P/F stain less steel kitchen sink with CI brackets, CP brass chain with rubber plug 40mm CP brass waste, CP brass tap etc complete i/c the fittings, cuttings and making good the wall wherever required-610 x 450 x 200 mm. 41 Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO / EQUIVALENT) BIB COCK LONG BODY 15 MM DIA 42 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour-Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms. 43 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour-Waste coupling 31 mm dia of 79 mm length and 62mm breadth, weighing not less than 45 gms. 44 Providing and fixing uplasticised PVC connection pipe with brass unions :45 cm length-15 mm nominal bore. 45 Providing, Fitting and fixing ball valve ( Brass) of approved quality complete with high or low pressure with plastic floats. 46 Providing, Fitting and fixing brass fittings of approved quality and size complete:GATE WAY VALVE 32MM DIA 47 Providing, Fitting and fixing brass fittings of approved quality and size complete:GATE WAY VALVE 20MM DIA 48 Providing, Fitting and fixing Chromium plated fittings of approved quality and size complete: (ESCO ORIGINAL)-SHOWER ROSE WITH ARM 49 Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge (a) 15 mm nominal dia 50 Providing, fitting and fixing. white vitreous china water closet (W.C) squatting pan (Indian type) 530mm size with 100mm SCI (Sand cast iron) P or Strap, 10 leter low level flushing cistern with fittings, CI brackets, 32mm flush pipe with fittings and clamps, 20mm overflow pipe,cutting and making good the wall and floor etc complete. Long type or Orissa type pan. HINDWARE CAT NO 20004 51 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of approved brand & manufacturer, in all colour high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately) and shade, in skirting, riser of steps, laid with cement based. Size of Tile 600x600 mm 52 Providing and Laying flooring with granite marble stone slabs 20mm thick granite stone slabs flooring of size not less than 1.0 sqm of 20mm thick laid over 20mm(average)1:4cm thick bare laid cement concrete and joint treated with white cement, mixed with matching pigment, curing including rubbing to give a granite finish, as per the direction of Engineer in Charge and carriage of material up to work site, all complete. 53 Providing and applying priming coat with ready mixed pink on timber work including preparation of the surface by thoroughly cleaning and sand papering etc complete. 54 Providing and painting with ready mixed paint of approved quality and shade with two or more coats to give an even and smooth shade including clearing the surface complete on new surface. 55 Providing and painting with plastic Emulsion paints one or more coats on old surface of required shade to give an even shade including brushing the surface clean of all dirt dust and smoothened by sand paper etc complete. . Last date of submission for this tender is 2024-10-29. This is a Kitchen Equipment tender in East Sikkim, Sikkim

East Sikkim, Sikkim

Apparel And Personal Care

Amount

Refer Docs

Contract date

Lanco Teesta Hydro Power Limited

Lanco Teesta Hydro Power Limited has published Cleaning Of Jungle (Bushes), Removal Of Deposited Soil And Providing Re-Connection Of Water Supply Pipe Line From Main Storage Water Tank To Field Hostel, Type-C And Administrative Building At Pamphok, Teesta-Vi H E Project, Sikkim. Last date of submission for this tender is 2025-01-17. This is a Environmental Decontimination Service tender in Sikkim, Sikkim

Amount

Refer Docs

Contract date

Lanco Teesta Hydro Power Limited

Lanco Teesta Hydro Power Limited has published Bids Are Invited For Monthly Basis Cab And Taxi Hiring Service - Without Fuel - Suv; Mahindra Bolero; 2023; 0-25, 000 Kms; A / C; 24 Total Quantity :. Last date of submission for this tender is 2024-05-03. This is a Vehicle Hiring Service tender in SINGTAM, Sikkim

SINGTAM, Sikkim

Amount

₹10.11 Lac

Contract date

Lanco Teesta Hydro Power Limited

Lanco Teesta Hydro Power Limited has published Tender For Quotation For Long Term Loan Up To Rs. 1035 Crore. Last date of submission for this tender is 2023-06-20. This is a Banking And Investment tender in Singtam, Sikkim

Singtam, Sikkim

Amount

Refer Docs

Contract date

Disclaimer: Tenderbook takes every possible care to ensure the accuracy and authenticity of the tender information published on the platform. However, users are requested to verify the details from the original Tender Notice or Tender Document issued by the respective tendering authority before making any decisions or taking action related to a tender. We are not liable for any loss or damages arising from its use. For any corrections or feedback, connect with us at contact@tenderbook.in