West Bengal Minorities Development And Finance Corporation

West Bengal Minorities Development And Finance Corporation has published Supplying, Fitting And Fixing Different Types Of Furniture For The Office Of Wbmdfc At Amber Building, Dd-27 / E, Salt Lake, Sector-I, Kolkata-700 064 , Aristo 1800 With Eru:Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Softclosing Access Flap With In-Build Power Box Are Provided On Work Surface For Wire Management. Secondary Work Surface Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Understructure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedstal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. All Metal Parts Must Be Powder-Coated With Epoxy Polyester Mixture ( >40 Microns ) To Prevent Rust And Stain. All Ms Components Must Be Subject To 1000 Hours Salt Spray Test Following The 7-Tank Galvanization And Powder-Coating Process. The Product Should Be 80% Mii, And Should Have In-House Test Certificates In Addition To Greenguard ( By Ul ) , Indoor Air Quality Gold, Griha & Svagriha And Green Pro. The Oem Should Be Part Of The Bifma Compliance Programme And Should Have 10 Products Or More Registered As Bifma Compliant. ( Also Verifiable From Www.Bifma.Org ) . Manufacturer Should Have Green Guard ( By Ul ) , Green Pro, Griha, Indoor Advantage Certification Along With Products Certifications Including Aiota, Indian Design Mark, Bifma Level 2 Confoms To Ansi / Bifma E3-2014E Furniture Sustainability Standard Issued By Bifma. Other Certificates Iso 9001:2015. Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 ( Tuv-Approved / Obtained From Nabcb- Central Govt. Accredited Organization ) Are Mandatory. Manufacturer Should Have Bifma Compliant Certification For At Least 10 Of Its Products.Supplier Should Have Either Oem Or Its Dealer With 5 Years Setup Of Local Service Centre ( Valid Documentation Must Besubmitted Bv The Bidder ) . , Aristo 1800 With Eru: , Versa Neo Hb: 1 ) Seat / Back Assembly: The Cushioned Seat Should Bemade Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Beupholstered With Stitched Cover And Moulded High Resilience Polyurethane Foam Of Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgffor 25% Compression.The Stitched Cover Should Bemade From Spacer Fabric And Leatherette. Cushioned Back Should Bemade Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Spacer Fabric And Leatherette. Seat Size : 47.0 Cm. ( W ) X 48.0 Cm. ( D ) Back Size : 45 Cm. ( W ) X 75.5 Cm. ( D ) 2 ) Armrests The Armrest Top Should Bemoulded From Polyurethane ( Pu ) And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk Ms E.R.W Tube. The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps.The Armrest Structure Should Bepowder Coated ( Dft 40-60 Micron ) . 3 ) Active Bio-Synchro Mechanism ( Fu3401 / 3402 ) : The Adjustable Tilting Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat / Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Bemade Up Of Hpdc Aluminium Black Powder Coated. 4 ) Seat Depth Adjustment Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 6.0±0.5 Cm. 5 ) Adjustable Back Supportback Frame Should Beconnected To The Up / Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. 6 ) Pneumatic Ht. Adjustment The Pneumatic Ht Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm.9 ) Twin Wheel Castor : 5 Nos. Twin Wheel Castors Should Beinjection Moulded In Plastic Having 6.0±0.1Cm Wheel Diameter And Assembled To Pedestal. All Metal Parts Must Be Powder-Coated With Epoxy Polyester Mixture ( >40 Microns ) To Prevent Rust And Stain. All Ms Components Must Be Subject To 1000 Hours Salt Spray Test Following The 7-Tank Galvanization And Powder-Coating Process. The Product Should Be 90% Mii, And Should Have The Following Certificates: Greenguard ( By Ul ) , Iaq Gold ( By Scs Global ) , Griha & Svagriha, Bifma Level 2 ( Should Be Visible In Www.Bifma.Org ) , Green Pro. Product Should Have In-House Certificates. The Oem Should Be Part Of The Bifma Compliance Programme And Should Have 10 Products Or More Registered As Bifma Compliant. ( Also Verifiable From Www.Bifma.Org ) . Manufacturer Should Have Green Guard ( By Ul ) , Green Pro, Griha, Indoor Advantage Certification Along With Products Certifications Including Aiota, Indian Design Mark, Bifma Level 2 Confoms To Ansi / Bifma E3-2014E Furniture Sustainability Standard Issued By Bifma. Other Certificates Iso 9001:2015. Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 ( Tuv-Approved / Obtained From Nabcb- Central Govt. Accredited Organization ) Are Mandatory. Manufacturer Should Have Bifma Compliant Certification For At Least 10 Of Its Products.Supplier Should Have Either Oem Or Its Dealer With 5 Years Setup Of Local Service Centre ( Valid Documentation Must Besubmitted Bv The Bidder ) , Versa Neo Mb: 1 ) Seat / Back Assembly: The Cushioned Seat Should Bemade Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Beupholstered With Stitched Cover And Moulded High Resilience Polyurethane Foam Of Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgffor 25% Compression.The Stitched Cover Should Bemade From Spacer Fabric And Leatherette. Cushioned Back Should Bemade Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Spacer Fabric And Leatherette. Seat Size : 47.0 Cm. ( W ) X 48.0 Cm. ( D ) Back Size : 45 Cm. ( W ) X 60.5 Cm. ( D ) 2 ) Armrests The Armrest Top Should Bemoulded From Polyurethane ( Pu ) And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk Ms E.R.W Tube. The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps.The Armrest Structure Should Bepowder Coated ( Dft 40-60 Micron ) . 3 ) Active Bio-Synchro Mechanism ( Fu3401 / 3402 ) : The Adjustable Tilting Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat / Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Bemade Up Of Hpdc Aluminium Black Powder Coated. 4 ) Seat Depth Adjustment Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 6.0±0.5 Cm. 5 ) Adjustable Back Supportback Frame Should Beconnected To The Up / Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. 6 ) Pneumatic Ht. Adjustment The Pneumatic Ht Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm.9 ) Twin Wheel Castor : 5 Nos. Twin Wheel Castors Should Beinjection Moulded In Plastic Having 6.0±0.1Cm Wheel Diameter And Assembled To Pedestal. All Metal Parts Must Be Powder-Coated With Epoxy Polyester Mixture ( >40 Microns ) To Prevent Rust And Stain. All Ms Components Must Be Subject To 1000 Hours Salt Spray Test Following The 7-Tank Galvanization And Powder-Coating Process. The Product Should Be 90% Mii, And Should Have The Following Certificates: Greenguard ( By Ul ) , Iaq Gold ( By Scs Global ) , Griha & Svagriha, Bifma Level 2 ( Should Be Visible In Www.Bifma.Org ) , Green Pro. Product Should Have In-House Certificates. The Oem Should Be Part Of The Bifma Compliance Programme And Should Have 10 Products Or More Registered As Bifma Compliant. ( Also Verifiable From Www.Bifma.Org ) . Manufacturer Should Have Green Guard ( By Ul ) , Green Pro, Griha, Indoor Advantage Certification Along With Products Certifications Including Aiota, Indian Design Mark, Bifma Level 2 Confoms To Ansi / Bifma E3-2014E Furniture Sustainability Standard Issued By Bifma. Other Certificates Iso 9001:2015. Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 ( Tuv-Approved / Obtained From Nabcb- Central Govt. Accredited Organization ) Are Mandatory. Manufacturer Should Have Bifma Compliant Certification For At Least 10 Of Its Products.Supplier Should Have Either Oem Or Its Dealer With 5 Years Setup Of Local Service Centre ( Valid Documentation Must Besubmitted Bv The Bidder ) . , Mingle Unitized 10 Str: Conference Table 10 Seater W / O Wire Manager Size Shall Be 2700 Width Mmx 1200 Depth Mmx 750 Height Mm . The Top Shall Be Made From 25 Mm Thick Pre- Laminated Board With 2 Mm Pvc Edge Beading. The Understructure Shall Have Side Panels Of 25 Mm Thick Pre-Laminated Twin With 2 Mm Thick Pvc Lipping Of Same Color On Sides And 0.8 Mm Pvc Lipping Of Matching Coloron The Bottom Curve. The Modesty Shall Be Made From 18 Mm Thick Pre-Laminated Board With 0.8 Mm Pvc Lipping Of Matching Color. Centre Support Panel For 10 - Seater Shall Have Panels Made From 25 Mm Thick Pre- Laminated Twin With 2 Mm Pvc Lipping Of Matching Color On Sides And 0.8 Mm Pvc Lipping Of Matching Color On The Bottom Curve. The W / O Wire Management Access Flap And Switch Mounting Tray Made From Matt Silver Anodized Aluminium Extrusion And Plastic Moulded Components To Facilitate Access Of Electrical / Data Voice Sockets From Top Powder Coated Switch Mounting Tray Made Made From 0.8 Mm And 1.2 Mm Ms Sheet . Switches To Be Mounted On Tray As Per Requirement . Wire Manager Rehau Made From Rau - Pvc 1309 / 7558. All Metal Parts Must Be Powder-Coated With Epoxy Polyester Mixture ( >40 Microns ) To Prevent Rust And Stain. All Ms Components Must Be Subject To 1000 Hours Salt Spray Test Following The 7-Tank Galvanization And Powder-Coating Process. The Product Should Be 90% Mii, And Should Have The Following Certificates: Greenguard ( By Ul ) , Iaq Gold ( By Scs Global ) , Griha & Svagriha, Green Pro. Product Should Have In-House Certificates. The Oem Should Be Part Of The Bifma Compliance Programme And Should Have 10 Products Or More Registered As Bifma Compliant. ( Also Verifiable From Www.Bifma.Org ) . Manufacturer Should Have Green Guard ( By Ul ) , Green Pro, Griha, Indoor Advantage Certification Along With Products Certifications Including Aiota, Indian Design Mark, Bifma Level 2 Confoms To Ansi / Bifma E3-2014E Furniture Sustainability Standard Issued By Bifma. Other Certificates Iso 9001:2015. Iso 14001:2015, Iso 50001:2018, Iso 45001:2018 ( Tuv-Approved / Obtained From Nabcb- Central Govt. Accredited Organization ) Are Mandatory. Manufacturer Should Have Bifma Compliant Certification For At Least 10 Of Its Products.Supplier Should Have Either Oem Or Its Dealer With 5 Years Setup Of Local Service Centre ( Valid Documentation Must Besubmitted Bv The Bidder ) . , La Sede Visitor: Seat / Back Assembly : The Cushioned Seat Should Bemade Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Beupholstered With Pure Leather And Moulded High Resilience ( Hr ) Polyurethane Foam Of Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgffor 25% Compression.The Cushioned Back Should Bemade Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Pure Leather. Seat Size : 47.6 Cm. ( W ) X 49.2 Cm. ( D ) Back Size : 46.5 Cm. ( W ) X 59.5 Cm. ( D ) Visitor Tubular Frame: The Tubular Frame Should Becantilever Type And Made Of Ø2.54± 0.03 Cm X 0.02 ± 0.016Cm Thick Ss 202 Tube. The Back Should Beconnected To Frame Through Chrome Plated High Pressure Die Case Connector Piece. Overall Dimensions Of Chair Seat Height -46.2 Cm. Height -98.2 Cm. Width & Depth Of Chair As Measured From Base - Width-60.9 Cm And Depth-64.7 Cm , Monarch 3 Seater Sofa: 3 Seater - Overall Size :Width:171Cmdepth : 82Cm Height :85Cmseating Height : 44Cm Primary Material - Pinewood Finish Color - Burgundy Upholstery Material - Leatherette Seat Height ( Cm ) - 45 Warranty - 1 Year Net Weight ( Kg ) - 39. Last date of submission for this tender is 2024-03-16. This is a Machine Tools tender in 24 Paraganas North, West Bengal