Urban Local Bodies

Urban Local Bodies has published Supply & Installation of 25 H.P Submersible Pump-Motor set atPyne Bagan in Ward No - 02 under Hooghly Chinsurah Municipality 25 H.P Submersible Pump-Motor Supply And Installation Of 25 H.P Submersible Pump-Motor Set At Pyne Bagan In Ward No - 02 Under Hooghly Chinsurah Municipality. , Supply & Installation Of 25 H.P Submersible Pump-Motor , Submersible Pump Motor Set 25H.P , 125 Mm. Dia. Ms Column Pipe With Socket , 125Mm Ms Nipple (11 Tpi) 300 Mm. Long One End Welded With Ms Flange. , 125 Mm.Ms Double Flange Bend 90º , 150 Mm. × 125 Mm. C.I.D.F Reducer , Pipe Holding Clamp125 Mm. × 20 , All Steel Wire Rope 3/8 {Stainless Steel 304 (S.S)} , Ropeholding Clamp As Per Motor Dia. , Rope Clamp 3/8? , 150 Mm. Non Return Valve 6? , 150 Mm. Sluice Valve 6? (Wheel Type) , Installation Of Submersible Pump Motor Set & Allied Accessories With Suitable Jointing Materials (Vide. Nut-Bolt, Washer, Gasket Etc.), Cutting Of Well Cover In Appropriate Measurement. , 50 Mm Dia. G.I Pipe , Supply & Installation Of Hood Type (Hood Made By 12 Swg M.S Sheet) Feeder Pillar Box With Vent ( Both Side Open Hinge Type Double Door ) Size: (Height 4-8?× Width 2-8? × Depth 1-10?) Made By M.S (14 Swg) Sheet With Locking Arrangement Fixed On 1.2 Mtr ×1.00Mtr × 0.250 Mtr Brick Structure ( 0.500 Mtrbgl & 0.450 Mtr Ogl ) With Sand & Cement Mortar Incl Excavation For Foundation & Completed With Cement Plaster & Net Cement Punning. The Sheets Would Be Welded On Box Type (As Per Size Of Box) 40Mm × 40Mm Size Angle Iron Frame With 4 Nos × 0.60 Mtr. Length 40Mm × 40Mm Angle Leg Grouted By 4:2:1 Cement Concrete With Painting Both In & Out Side By Two Coats Of Synthetic Enamel Aftr One Coat Of Red Led Primer Completed, Comprising The Following Materials Are Fabricated By Welding For Fixing Of E.I Accessories As Follows.(Suitable Size 2 Nos. .085Mm × .085Mm × 40Mm M.S Angle, 2Nos 1.40Mm×1.40Mm× 40Mm M.S Channel Fabricated Inside The Box By Welding, 1 Nos × 1.20 Mtr×80 Mtr × 20Mm Thick Bakelite Sheet Fixed For Supply & Fixing. I) 100 Amp. Sheet Steel Enclosed Main Switch Of L&T Make With Din Type Hrc Fuse – 01 No, Ii) 63 Amp Sheet Steel Enclosed Main Switch Of L&T Make With Din Type Hrc Fuse – 01 No, Iii) Copper Bus Ar Of Size 25Mm×450Mm×5Mm Fixed On Vmc Insulator Fixed In A Suitable Size Bus Bar Chamber, Iv) L & T Make Fasd Starter Model-Ml1.5 F With 20-30 Amp. Realy Range / Bch Having Same Specification, V) City Coil Of Bus Bar (100/.05), Vi) A.E Make Amp. Mtr. & Volt Meter & Selector Switch, 3 Nos Phase Indicator (Led) On One Side, & 100 Amp.Porcelain Kit Kat On Another Side ) All Equipment’S Are Connected By Suitable Size Copper Wire. Vii) Single Phase Preventer. , Earthing Installation By 50 Mm Dia G.I Tata(M) Pipe × 3 Mtr Length By Drilling Method, Not To Hammer Incl. Connection Electro Pipe By Stranded Wire To The Panel & Equipments , 3 Core Pvc Inslated (Heavy Duty)Flat Weather Proof Electric Cable Duty Isi Certificationmark 6 Sq.Mm. , Supply Of 4 Core X 25 Sqmm Al. Armd. Pvc/Xlpe Insulated Cable . , S &F Of 125 Amp. Havells Make Kit Kat Fuse Unit. , S & Fcopper Neutral Link Bar. Last date of submission for this tender is 2025-10-14. This is a Submersible Pump tender in Hooghly, West Bengal