Steel Authority Of India Limited

Steel Authority Of India Limited has published Bids Are Invited For Hose Stainless Steel -1 STAINLESS STEEL(AISI-321)CORRUGATED FLEX.HOSE ASSEMBLES WITH S.S(AISI304) SINGLE WIRE BRAIDING FITTED WITH FORGED CARBON STEEL 1/2 BSP FEMALE SWIVEL FITTINGS AT BOTH ENDS. BURSTING PRESSURE 350 P.S.I SIZE : 1/2 I.D X 24 LONG. 60 EA 2 HOSE CONSTRUCTION : SINGLE BRAIDED MATERIAL : CORRUGATED STAINLESS STEEL MAT, BRAID : STAINLESS STEEL MAT, CONNECTIONS : STAINLESS STEEL DIAMETER, ID : 25 MM LENGTH, OVERA LL : 210 MM HOSE MATERIAL SPEC: AISI 321, BRAID MATERIAL SPEC: AISI 304, END CONNECTION: BOTH END 90 DEG SWIVEL 1 IN CH BSP NUT, 60 DEG CONE WITH O-RING SEAL, (WITH MATCHING WELDABLE NIPPLE), LHF WATER COOLING HOSES ON ELECTRODE ARM ASSEMBLY 5 EA 3 HOSE CONSTRUCTION : SINGLE BRAIDED MATERIAL : CORRUGATED STAINLESS STEEL MAT, BRAID : STAINLESS STEEL 304 MAT, CONNECTIONS : STAINLESS STEEL DIAMETER, ID : 25 MM LENGTH, O VERALL : 1000 MM END CONNECTION: BOTH END FEMALE SWIVEL NUT 1 INCH BSP, 60 DEG CONE WITH O-RING ON BOTH END, WORKING PRESSURE: 18 BAR, TEST PRESSURE: 27 BAR, WITH HEAT PROTECTION SLEEVE 100 EA 4 HOSE SERVICE : WATER CONSTRUCTION : OVER BRAIDED MATERIAL : CORRUGAT ED STAINLESS STEEL MAT, BRAID : STAINLESS STEEL 304 MAT, CONNECTIONS : STAINLESS STEEL 304 DESIGN SPEC, FLANGE(S) : ANSI B16.5 PRESSURE DESIGN, FLANGE : CLASS 150 DIAMETER, ID : 25 MM LENGTH, OVERA LL : 2000 MM HOSE MATERIAL SPEC: AISI 321, END CONNECTION: RAISED FACE SLIP SWIVEL FLANGE AISI 304, WITH MATCHING FL ANGE: AISI 304, BOLT: AISI 304, NUT: AISI 304 AT BOTH END, FLOW RATE: 5 M3/HR, WORKING PRESSURE: 7 BAR, TEMPERATURE: 50 DEG C, (WITH MATCHING HOSE ADAPTORS), LHF WATER COOLING HOSES ON ELECTRODE ARM ASSEMBLY 10 EA 5 HOSE SERVICE : ARGON / WATER CONSTRUCTION : OVER BRAIDED MATERIAL : CORRUGATED STAINLESS STEEL MAT, BRAID : STAINLESS STEEL 304 MAT, CONNECTIONS : STAINLESS STEEL 304 DESIGN SPEC, FLANGE(S) : IS 6392 DIAMETER, ID : 40 MM LENGTH, OVERALL : 12000 MM HOSE MAT ERIAL SPEC: AISI 321, END CONNECTION: SWIVEL PLATE FLANGE AISI 304, AS PER TABLE 11, WITH MATCHING FLANGE: AISI 304, BOLT: AISI 304 AND NUT: AISI 304 AT BOTH END, FLOW RATE: 230 M3/HR, WORKING PRESSURE: 10 BAR, TEMPERATURE: 60 DEG C 5 EA 6 HOSE CONSTRUCTION : BRAIDED MATERIAL : CORRUGATED STAINLESS STEEL MAT, BRAID : STAINLESS STEEL MAT, CONNECTIONS : STAINLESS STEEL DIAMETER, ID : 40 MM LENGTH, OVERALL : 600 MM END CONNECTION: 1.1/2 INCH BSP SWIVEL NUT 60 DEG CONE, O-RING ON BOTH END, WITH CAM LOCK STAINLESS STEEL WITH F EMALE THREAD AND STRAIGHT CONNECTOR, WITH HEAT PROTECTION SLEEVE, WORKING PRESSURE: 5 BAR, TEST PRESSURE: 10 BAR, (WITH MATCHING WELDABLE NIPPLE),LHF WATER COOLING HOSES ON ELECTRODE ARM ASSEMBLY 5 EA 7 HOSE CONSTRUCTION : BRAIDED MATERIAL : CORRUGATED STAINLESS STEEL MAT, BRAID : STAINLESS STEEL MAT, CONNECTIONS : STAINLESS STEEL DIAMETER, ID : 40 MM LENGTH, OVERALL : 1200 MM END CONNECTION: SWIVEL NUT, 1.1/2 INCH BSP, 60 DEG CONE, O-RING ON BOTH END, WITH MATCHING STRAIGHT CONNECTOR WITH CAM LOCK STAINLESS STEEL, WITH FEMALE THREADS AND STRAIGHT CONNECTOR, WITH HEAT PROTECTION SLEEVE, WORKING PRESSURE: 5 BAR, TES T PRESSURE: 10 BAR, (WITH MATCHING WELDABLE NIPPLE), LHF WATER COOLING HOSES ON ELECTRODE ARM ASSEMBLY 5 EA 8 HOSE CONSTRUCTION : BRAIDED MATERIAL : CORRUGATED STAINLESS STEEL MAT, BRAID : STAINLESS STEEL MAT, CONNECTIONS : STAINLESS STEEL DIAMETER, ID : 40 MM LENGTH, OVERALL : 950 MM END CONNECTION: 1.1/2 INCH BSP SWIVEL NUT, 60 DEG CONE, O-RING ON BOTH END, WITH MATCHING STRAIGHT CONNECTOR, W ITH CAM LOCK STAINLESS STEEL WITH FEMALE THREAD AND STRAIGHT CONNECTOR, WITH HEAT PROTECTION SLEEVE, WORKING PRESSURE: 5 BAR, TEST P RESSURE: 10 BAR, (WITH MATCHING WELDABLE NIPPLE), LHF WATER COOLING HOSES ON ELECTRODE ARM ASSEMBLY 5 EA 9 HOSE CONSTRUCTION : DOUBLE WIRE BRAIDED MATERIAL : CORRUGATED STAINLESS STEEL MAT, BRAID : STAINLESS STEEL MAT, CONNECTIONS : STAINLESS STEEL 304 DIAMETER, ID : 25 MM LENG TH, OVERALL : 500 MM HOSE MATERIAL SPEC: AISI 321, BRAID MATERIAL SPEC: AISI 304, COVER MATERIAL: CERAMIC CLOTH, END CONNECTION: ONE END 1 INCH BSP SWIVEL NUT AISI 304, 60 DEG CONE, OTHER END 90 DEG BEND WITH 1 INCH BSP SWIVEL NUT AISI 304, 60 DEG CONE, WORKING PRESSURE: 12 BAR G, TEST PRESSURE: 18 BARG, TEMPERATURE: UPTO 100 DEG C, FOR BOTTOM STIRRING EQUIPMENT OF CONVERTER OF BOF PLANT 60 EA 10 HOSE TYPE : FLEXIBLE CONSTRUCTION : SINGLE WIRE BRAIDED DESIGN SPECIFICATION : BS 6501 PART 1 MATERIAL : CORRUGATED STAINLESS STEEL MAT, CONNECTIONS : CARBON STEEL DIAMETER, ID : DN 125 LENGTH, OVERALL : 3900 MM+3/-1% HOSE MATERIAL SPEC: AISI 321, BRAID MATERIAL SPEC: AI SI 304, JACKET MATERIAL: CERAMIC FLEXIBLE, TYPE: B, END CONNECTION: BOTH END HAVING STUB END SERRATED FACE WITH DN 125 AND PN 16 SWI VEL FLANGE, WORKING PRESSURE: 14 KG/CM2, TEST PRESSURE: 21 KG/CM2 AND WORKING TEMPERATURE: 200 DEG C, FOR TUNDISH PREHEATER 6 EA 11 HOSE CONSTRUCTION : BRAIDED MATERIAL : CORRUGATED STAINLESS STEEL MAT, BRAID : STAINLESS STEEL MAT, CONNECTIONS : STAINLESS STEEL DIAMETER, ID : 40 MM LENGTH, OVERALL : 400 MM END CONNECTION: 1.1/2 INCH BSP SWIVEL NUT, OTHER END 90 DEG 1.1/2 INCH SWIVEL NUT, 60 DEG CONE, O-RING ON BOTH END, WITH MATCHING STRAIGHT CONNECTORS ALONG WITH CAM LOCK STAINLESS STEEL WITH FEMALE THREADS AND STRAIGHT CONNECTOR, WITH HEAT PRO TECTION SLEEVE, WORKING PRESSURE: 5 BAR, TEST PRESSURE: 10 BAR, (WITH MATCHING HOSE ADAPTORS),LHF WATER COOLING HOSES ON ELECTRODE ARM ASSEMBLY 5 EA 12 HOSE TYPE : FLEXIBLE CONSTRUCTION : SINGLE WIRE BRAIDED DESIGN SPECIFICATION : BS 6501 PART 1 MATERIAL : CORRUGATED STAINLESS STEEL MAT, CONNECTIONS : CARBON STEEL DIAMETER, ID : DN 150 LENGTH, OVERALL :6500 MM HOSE MATERIAL SPEC: AISI 321, BRAID MATERIAL SPEC: AISI 304, JACKET MATERIAL: CERAMIC FLEXIBLE, TYPE: B, END CONNECTION: BOTH END HAVING STUB END SERRATED FACE WITH DN 125 AND PN 16 SWI VEL FLANGE, WORKING PRESSURE: 14 KG/CM2, TEST PRESSURE: 21 KG/CM2 AND WORKING TEMPERATURE:100 DEG C, FOR HORIZONTAL PREHEATER . 4 EA 13 HOSE TYPE : FLEXIBLE CONSTRUCTION : SINGLE WIRE BRAIDED DESIGN SPECIFICATION : BS 6501 PART 1 MATERIAL : CORRUGATED STAINLESS STEEL MAT, CONNECTIONS : CARBON STEEL DIAMETER, ID : DN 200 LENGTH, OVERALL : 450 MM +3/-1% HOSE MATERIAL SPEC: AISI 321, BRAID MATERIAL SPEC: AISI 304, JACKET MATERIAL: CERAMIC FLEXIBLE, TYPE: B, END CONNECTION: BOTH END HAVING STUB END SERRATED FACE WITH DN 200 AND PN 16 SWIVEL FLANGE AS PER B 16.5 , WORKING PRESSURE: 14 KG/CM2, TEST PRESSUR E: 21 KG/CM2 AND WORKING TEMPERATURE:200 DEG C, FOR LADLE PREHEATER 4 EA 14 HOSE,SS,DN100,LG-250MM; TYPE :FLEXIBLE CONSTRUCTION ,SINGLE WIRE BRAIDED,DESIGN SPECIFICATION : BS 6501 PART 1,MATERIAL : CORRUGATED STAINLESS STEEL MAT, CONNECTIONS : CARBON STEEL,DIAMETER ID : DN 100,LENGTH OVERALL : 250 MM,HOSE MATERIAL SPEC: AISI 321, BRAID MATERIAL SPEC: AISI 304, JACKET MATERIAL: CERAMIC FLEXIBLE, TYPE: B, END CONNECTION: BOTH END HAVING STUB END SERRATED FACE WITH DN 100,PN 16 SWIVEL FLANGE ACC. TO ANSI B16.5, WORKING PRESSURE: 14 KG/CM2, TEST PRESSURE: 21 KG/CM2 AND WORKING TE MPERATURE:100 DEG C, FOR LADLE PREHEATER COG LINE. 4 EA Total Quantity : 278. Last date of submission for this tender is 2024-08-01. This is a Absorbents tender in Paschim Bardhaman, West Bengal