Public Works Department

Public Works Department has published Supply, fitting and trails/demonstration of various testing accessories, machine spares and other items, compatible with Universal Testing Machine of 2000 kN Model No. BSUT-200 JD, Serial No. 07/2015. (Details enclosed in schedule). - Details of Bending, Re-bending mandrels. Note: All supplied items from Sl. 1 to Sl. 8 should conform to IS 1786: 2008. 2 Re-Bending Support with Guide Plate compatible UTM Model No. BSUT-200 JD 3 Bending Mandrel for Fe-500.Rod Dia: 8, 10, 12,16,20, 25, 28 & 32 4 Bending Mandrel for Fe-500D.Rod Dia: 8, 10, 12,20,25,28 & 32. 5 Bending Mandrel for Fe-550.Rod Dia: 10,25, 28 & 32. 6 Re-Bending Mandrel for Fe-500.Rod Dia: 8, 10, 12, 16, 20, 25, 28 & 32. (Required for Re-Bend Test 157.5°) 7 Re-Bending Mandrel for Fe-500D.Rod Dia: 8,12, 16, 20, 25, 28, 32. (Required for Re-Bend Test 157.5°) 8 Re-Bending Mandrel for Fe-550.Rod Dia: 8, 10,16, 20, 25,32. (Required for Re-Bend Test 157.5°) 9 Re-Bending Mandrel for Fe-550D.Rod Dia: 8 & 10. (Required for Re-Bend Test 157.5°) 10 Details of accessories (All accessories to be supplied as per existing standards and should be compatible with existing UTM) 11 Jaw Plate 12 Round Grip (Range 10-25 mm) 13 Limit Switch Rod 14 Flexible hydraulic Hose Pipe with ‘o’ rings. 15 Hose Pipe Fittings Charge 16 Wooden ladder cum platform for loading samples.Specifications: (i) Height: 36, Width: 36. Top Platform 24X 18”. Width of steps to be atleasst 8. (ii) Should be manufactured with properly seasoned wood of suitable quality for long life performance. (iii) Steel inserts to be provided in joints/hinges to make the structure durable. (iv) The entire structure should be painted with three coats of wood paint and one final coat of resin paint. Note: Visit to site and discussion with engineers is a must in this case. Design will be submitted by the bidder. 17 Safety enclosure around the UTM Model No. BSUT-200 JD.Specifications: (i) The prime purpose of manufacturing this enclosure should be safety of the working personnel. The structure should be designed in such a way that safety and ergonomics, both are taken care of. (ii) The enclosure should be such that the largest sample can be easily loaded onto the machine.(iii) The enclosure should have the facility to cater for regular and routine maintenance work and should not be a hindrance for the maintenance personnel.(iv) The enclosure should be of such material that the engineer/operator is able to see the samples during the tests.(v) The entire structure should be painted wherever required with primer and finally with two coats of corrosion resistant paint of suitable colour.Note: Visit to site and discussion with engineers is a must in this case. Design will be submitted by the bidder . Last date of submission for this tender is 2024-11-11. This is a Universal Testing Machine tender in parganas, West Bengal