Municipal Affairs Department

Municipal Affairs Department has published Supply, Fittings And Fixing Of Open Green Gym Equipments With Paver Block Plat Form At B-3, Esr-8, Park In Ward No-8 Under Kalyani Municipality- 1 Double Cross Trainer1220mm x 762mm x 1524mm SAFE PLAY AREA:-1828mm x 1220mm cross trainer equipment made up of 3inch B class GI pipe Prime Stand duly bend, Foundation center pipe The pedal frame is made of 40 x 40mm square G.I pipe The handle frame is made of 32mm OD G.I pipe Footrest frame support of dimension 250 x 100 x 2mm is welded for supporting the aluminium/iron footrest size 300mm x 150mm x 5mm is used for supporting the foot dia 60mm seamless pipe bushes Permanent iubricated Ball bearings 6205zz/6205-2rs. Foundation plate of dia 175mm and 10mm thickness is welded at bottom All welded joint are of good quality. High tensile steel with vanized nut & bolts to be used The Circlips to be used are of 25mm Allen Bolts are also used to tighten the closing cap Closing cap of HDPE/PPCP Plastic is used High quality rubber grip are also used for firm handling The powder coating done with Pure polyester powder with 60 to 70 micron thickness. 2 Air Walker1065mm x 785mm x 1390mm SAFE PLAY AREA:-1524mm x 1024mm Air Walker equipment made up of 4inch B class GI pipe Prime Stand duty bend, Foundation center pipe The pedal frame is made of 42mm OD GI pipe The handle frame is made of 32mm OD GI pipe Footrest frame support of dimension 250 x 100 x 2mm is weldefor supporting the aluminium/iron footrest size 300mm x 150mm x 5mm is used for supporting the foot dia 60mm seamless pipe bushes permanent iubricated Ball bearings 6205zz/6205-2rs. Foundation plate of dia 175mm and 10mm thickness is welded at bottom All welded joint are of good quality. High tensile steel with galvanized nut & bolts to be used The Circlips to be used are of 25mm Allen Bolts are also used to tighten the closing cap Closing cap of HDPE/PPCP Plastic is used The powder coating done with Pure polyester powder with 60 to 70 micron thickness. 3 Leg Press1676mm x 610mm x 1524mm SAFE PLAY AREA:-2286mm x 1220mm Leg press equipment made up of 4inch B class GI pipe Prime Stand duty bend, Foundation center pipe The remaining frame is made of 42mm OD GI pipe MS Seat of size 380mm x 300mm x 5mm is used 60mm seamless pipe bushes permanent iubricated Ball bearings 6205zz/6205-2rs. Foundation plate of dia 225mm and 10mm thickness is welded at bottom All welded joint are of good quality. High quality rubber grip are also used for firm handling. High tensile steel with galvanized nut & bolts to be used. The Circlips to be used are of 25mm Allen Bolts are also used to tighten the closing cap Closing cap of HDPE/PPCP Plastic is used The powder coating done with Pure polyester powder with 60 to 70 micron thickness. 4 Triple Twister1460mm x 1460mm x 1370mm SAFE PLAY AREA:-1828mm x 1828mm Standing Twister equipment made up of 3inch B class GI pipe. Prime Stand duty Foundation center pipe The handle frame is made of 32mm OD GI pipe Round plate of dia 300mm and 10mm thickness is joined for standing and twisting. 60mm seamless pipe bushes permanent iubricated Ball bearings 6205zz/6205-2rs. Foundation plate of dia 175mm and 10mm thickness is welded at bottom All welded joint are of good quality. High tensile steel with galvanized nut & bolts to be used The Circlips to be used are of 25mm Allen Bolts are also used to tighten the closing cap Closing cap of HDPE/PPCP Plastic is used. 5 Pull Chair / Shoulder PressPRODUCT AREA:- L X W X H 1220mm X 1220mm X 1524mm SAFE PLAY AREA:-1828mm x 1828mm Single Wheel Shoulder Builder equipment made up of 3inch B class GI pipe. Prime Stand duty bend Foundation center pipe. The wheel frame is made of 42mm OD GI pipe and the supporting is made of 32mm OD GI pipe 60mm seamless pipe bushes permanent iubricated Ball bearings 6205zz/6205-2rs. Foundation plate of dia 175mm and 10mm thickness is welded at bottom All welded joint are of good quality. High tensile steel with galvanized nut & bolts to be used The Circlips to be used are of 25mm Allen Bolts are also used to tighten the closing cap Closing cap of HDPE/PPCP Plastic is used. The powder coating done with Pure polyester powder with 60 to 70 micron thickness. 6 Paver Block Size 35 fit x 15 fitPaver Block Size 10.65 Mrt. x 4.5 Mrt Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should not be less than 5.(c) 50 mm thick interlocking designer concrete paver block M-35 grade for light-traffic zone,commercial & office complex, tourist resort as per IS: 15658-2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular /granular sub-base course including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) (i) Grey 7 Paver Block Size 35 fit x 15 fitPaver Block Size 10.65 Mrt. x 4.5 MrtProviding and fixing at or near ground level precast cement concrete in kerbs (size: 450 mm x 350 mm x width 150 mm at bottom with bevelled nosing at top) of cement concreat M20 Grade without reinforcement, fixing as per approved pattern and setting in position at site after preparing the bed grade and slopes by laying Cement concrete with jhama khoa (1:4:8) as per specification and direction of Engineer-in-Charge including filling of joints with 10 mm thick cement morter (3:1) and back filling the vertical piece properly with earth duly compacted and curing the morter joints for atleast 3 days including cost and carriage of all materials complete.Ref.Page -228, Item -8 ,PWD SOR Vol-I w. e. f. 1.11.2017 8 GST 18 % 9 CESS 1 % . Last date of submission for this tender is 2025-03-01. This is a Gym Equipment tender in Nadia, West Bengal