Military Engineer Services

Military Engineer Services has published Tender For Repair To External/Internal Palstering, Painting And Other Misc B/R Works In Otm Accommodations Of Pocket A Of B/R-I Sub Division Under Ge (S) Binnaguri.; 1 Taking down plaster in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with wateretc complete all as specified and removal of rubbish off the site of work 2 M&Lfor 15 mm thick renderingon fair faces of brick work in cement mortar (1:6) andfinished the surfaceseven and smooth without using extra cementetc complete all as specified 3 M&L for 5mm thickrendering in CM (1:3) onconcrete surfaces as in ceilingandfinishing the surfaces even and smooth with out using extra cementetc complete all as specified 4 M&L for 20mm thick rendering on fair faces of brick work or concrete surfaces in two layers (10mm & 10mm) in cement mortar (1:4) and finished the surface evenand smooth with applying WPCetc complete all as per manufacturers specifications and as specified (Note : WPC shall be measured and paid separately) 5 Supply only liquid water proofing compound all as specified 6 Demolition of Brickwork built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions complete allas specified and removal of rubbish off the site of work 7 Material and Labour for brick work with burnt Fly ash old size brick straight of curved on plan exc 6m mean radius built in CM (1:6) complete all as specified 8 Ditto all as per serial item No 07 descibed hre-in-above but except brickNote: Reusable metirial retrieval against relevant item shall be used 9 Material and Labour for Brick work with burnt Fly ash old size bricks straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete allas specified 10 Materials and labour forPreparation of new plastered surfaces of walls and applying three coats of white washcomplete all as specified 11 Materials and labour for preparation of new plastered surfaces of wall and applying two coats of acrylic washable distemper over a coat of primer complete all as specified 12 Materials and labour forpreparation of new plastered surfaces of ceiling and applying three coats of white washcomplete all as specified 13 M&L for preparation on new plastered surfaces of wall and applying two coats ofexterior acrylic emulsion paint over a coat of primercomplete all as specified 14 M&L for applying 2mm thick average thickness wall care putty(in two layers) on wall/ceiling complete all as specifiedincl preparation of the surface 15 M&L forpreparation of old decorated/undecorated plastered surfaces and applying one coat of oil acrylic distemper on walls complete all as specified 16 M&L forcomplete removal of old decorated surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds,etc and and applying two coat of oil acrylic distemper on walls complete all as specified 17 M&L forPreparation of old plastered surfaces and applying one coat ofexterior acrylic emulsion paint complete all as specified 18 M&L for complete removal of old decorated surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds,etc and applying two coats of exterior acrylic emulsion paint over a coat of primer etc complete all as specified 19 M&L for preparation of old decorated surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds,etand applying one coat of white wash on walls complete all as specified 20 M&L for preparation of old decorated surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds,etcand applying one coat of white wash on ceilings complete all as specified 21 M&L forpreparation of old steel surfaces of any descriptionover 10 cm width or girth and applyingone coat of synthetic enamel paintcomplete all as specified 22 M&L forpreparation of old wooden surfaces of any descriptionover 10 cm width or girth and applyingone coat of synthetic enamel paintcomplete all as specified 23 Removal of plants, shurbs, weeds upto 4.5 ft height complete incl roots dia nexc 25mm chajja/shaft/masonry at any height incl applying root killer powder(copper sulphate) asper manufacturers instructions including all necessary scafolding as per requirement to execution of work with safty precaution and removing of rubbish/ spoil outsideMOD land/area complete all as specified 24 M&L for french polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats all as specified 25 S&F in repair Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including 5mm thick PVC fillets of width 35mm with grid size 500mm x 500mm in both horizontal and vertical directions including necessary caping/fillets at top, bottom and junctions/corners of wall where ever required as per site etc complete all asspecified 26 S&F in repair hollow PVC Wall panneling with designed/printed panels having wide of 300mm including necessary caping/fillets at top, bottom and junctions/corners of wall where ever required as per site etc complete all as specified 27 Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets and removal of rubbish off the site of work 28 M&L for suspended false ceilling system using metalic exposed suspende system, grid section size 600mm x 600mm comprising of GI powder coatedmain runner of dimension 39 mm x 24mm x 0.80mm thick ( thicknesscomprising of GI/0.4+ PPPCGS/0.3mm & weight of Runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mm X 24mm x 0.8 mm thick wall angle 22.2mm x22.2mm x 0.65 mm thick ( thicknesscomprising of GI/0.35 + PPPCGS/0.3 mm & Weight of angle 0.70 kg for 3050 mm length) withand including 6 mm thick designed prepainted calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid ( placed in the grid system duly suspended with 4 mm dia G I bars hangers fixed with steel dash through fastenersfrom purlins of the roof with necessary fittings and fixtures etc complete all as specified 29 Material and labour for preparing old steel surfaces and applying two coats of synthetic enamel paint on steel structure like watch tower (up to height 12.00 m),Steel ladderscomplete all as specified . Last date of submission for this tender is 2025-11-21. This is a Painting tender in Jalpaiguri, West Bengal