Government Engineering College

Government Engineering College has published Procurement Of Textile Technology Laboratory Machines Procurement Of 3 Types Of Textile Technology Laboratory Machines , Textile Technology Laboratory Machines , Laboratory High Temperature Steamer Specification: The Machine Must Be Able To Perform The Following Processes: 1. Drying, Curing And Thermo Setting With Hot Air 2. High Temperature Steaming At Atmospheric Pressure And Temperature 3. Saturated Steaming • Fabric Transportation On A Frame With Pins •Adjustable Position Of The Pins On The Frame For Different Size Of Samples • Sample Size 425 Mm X 350 Mm •Dwell Time 6 Seconds To 99 Minutes •Motorised Arrangement Must Be Provided For Inserting / Removing The Frame From The Chamber •Automatic Ejection Of The Pin Frame From The Hot Zone On Completion Of The Dwell Time •Temperature For Saturated Steaming 102°C •Temperature For Super Heated Steam 185°C •Temperature With Hot Air 210°C •High Quality Insulation On The Inner Body To Limit The Heat Losses •High Efficiency Blower For Hot Air Recirculation •Electrical Heating For Steam Generation And Hot Air •Heater Capacity 12 Kw •Heating Control Digital Temperature Indicator Controller •Automatic Water Level Control •Electrical Supply 415V Ac, 3 Phase, 50 Hz •Machine Dimensions W 1300Mm X H 1600Mm X D 1200Mm •Basic Material Of Construction Ss 304 And Control Unit Ss Or Ms , Open Bath Beaker Dyeing Machine ? Beaker Capacity 500Ml ? No. Of Beakers 12 ? Rocking Barsarrangement Must Be Provided With Stroke Length Adjustable From 25Mm To 50Mm ? Rocking Bars Rotation 60 Rpm And Above, Apart From Up And Down Motion, Rocking Bars Must Be Able To Providedirection Reversal Every 3 Minutes ? Rocking Bars Must Be Able To Work For Fabric, Yarn, Fibre ? Automation Through Programmable Logical Controller S-121 ? Temperature Up To 95°C Or Boiling ? Heatingmedium Water ? Cooling Provision Must Be Provided ? Heating Load (Approx.) 6 Kw ? Electric Supply 415 V, 3 F ? Material Of Construction Ss 316 For Beakers, Other Parts Ss-304 & Control Unit Ms Powder Coated ? Approx Weight 93 Kg ? Machine Dimension L 1000Mm X W 325Mm X H 1040Mm , Water Bath Shaker Machine: Specification: ? Inside Chamber Size 22 X 22 Inch. ? No. Flask 16 Flask With Air Tight Lid. ? Flask Ss316 ? Flask Volume 500 Ml ? Inside Ss316 Out Side Ss304 ? Outer Dimension 3 Feet X 3 Feet Approx. ? Temperature Controller And Rpm Meter. ? Max Temperature 95°C Or Boiling ? Beaker Volume ? Power Supply Single Phase. Last date of submission for this tender is 2023-11-20. This is a Temperature Controller tender in Serampore, West Bengal