Kichha Sugar Company Limited

Kichha Sugar Company Limited has published Tender For Supply Of Ci Cs Casted Items- 1 C.I. Casted Items On New Basis 2 C I Door Of Boiler As Per Drawing No Ksc/Blr/Door/35Tph Approx Weight 50 Kg Suitable For Working Apto 800 Degree Centigrate 3 C.I. Tool Post Of Plainer Machine Approx Weight 18 Kg Each 4 C I Bagasse Chuite Of Boiler As Per Drawing No Ksc/Blr/Chuite/35Tph Approx Weight 160 Kg Suitable For Working Apto 800 Degree Centigrate (Duly Machined) 5 C.I. Idler For Cane Carrier (I) As Per Drawing No. Ksc/Cc1/4/17 6 C.I. Pulley (As Per Drawing) With Machining 7 C.I. Coupling Different Size (As Per Drawing) 8 C.I. Casting Various Size (Gulla) As Per Drawing With Rough Machining. Different Size 9 C.I. Casted Items (On Conversion Basis) 10 C I Door Of Boiler As Per Drawing No Ksc/Blr/Door/35Tph Approx Weight 50 Kg Suitable For Working Apto 800 Degree Centigrate 11 C.I. Tool Post Of Plainer Machine Approx Weight 18 Kg Each 12 C I Bagasse Chuite Of Boiler As Per Drawing No Ksc/Blr/Chuite/35Tph Approx Weight 160 Kg Suitable For Working Apto 800 Degree Centigrate (Duly Machined) 13 C.I. Idler For Cane Carrier (I) As Per Drawing No. Ksc/Cc1/4/17 14 C.I. Pulley (As Per Drawing) With Machining 15 C.I. Coupling Difrent Size (As Per Drawing) 16 C.I. Casting Various Size (Gulla) As Per Drawing With Rough Machining. Different Size 17 Cast Steel Spur Gear & Pinion New Basis 18 C.S. Trash Beam For Mill Size 33\X66\ As Per Drawing Approc Weight 1 Mt 19 Cast Steel & Spur Gear- 72 Teethface Width- 75Mm, Bore- 50Mm Od- 473 Mm, Module- 6.4. Approx Weight 90 Kg 20 Cast Steel & Spur Gear- 26 Teethface Width- 75Mm, Bore- 45Mm Od- 178.24 Mm, Module- 6.4- Approx Weight 11.6 Kg 21 Cast Steel Pinion- 24 Teethface Width- 70Mm, Bore- 45Mm Od- 166.4 Mm, Module- 6.4 -Approx Weight 9.7 Kg 22 Cast Steel Pinion- 34 Teethface Width- 75Mm, Bore- 40Mm Od- 308 Mm, Module- 8.56. Approx Weight 20 Kg 23 Cast Steel Gear Pinion- 50 Teeth As Per Drg No. Mills-138Approx Weight 11 Kg 24 Cast Steel Sprocket- 13 Teeth 6” Pitchas Per Drg. Mills-27 25 Cast Steel Pinion- 18 Teethface Width- 75Mm, Bore- 45Mm Od- 128 Mm, Module- 6.4.Approx Weight 5 Kg 26 C.S.Scaper For Mills Duly Machined As Per Sample Drg.No Ksc/Mh/91618 Approx Wt-190Kg Each 27 Cast Steel Trash Plate (Lenth 1680 Mm) Made Of Is 2708 Grade Iii Duly Rough Machined As Per Drg.No – Ksc/Mh/285/22 28 C.S. Wheel For Cane Unloader Bridge As Per Drg.No. Ksc/Unloader/2/17.Approx Wt 185 Kg. 29 C.S Gear 68 Teeth, Module-6.14Face Width-65Mm, O.D--430Mmdrg No.-Ksc/Unloder/17 30 C.S.Wheel For Cane Unloder Trolly Drg No.-Ksc/Cr/145 Approx.Wight-55Kg 31 C.S.Pinion-18Teeth, Module-6.14, F.W-65 Od-122.8 Drg. No.-Ksc/Unloder/17 32 C.S. Sprroket 6\ Pich 14 Teeth Drg No.-Ksc/M/1565 (Tail End) Material 2708 33 C.S. Sprroket 6\ Pich 14 Teeth Drg No.-Ksc/M/1564 (Driving Shaft) Material 2708 34 C.S.Sproket-36 Teeth For Duplex Chain 2 1/2\ Pitch Material 2708 Drg No Ksc/Boiler-163 35 C.S. Sprocket 17 Teeth For Duplex Chain 2 1/2\ Pitch Material 2708 Drg No-Ksc/Mill/4887 36 Opertuinity Device Of Trash Turner Beam Material-Ss Drg No. Mills-8488 37 C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-10, Fw-110Mm Od-260Mm Bore-50Mm 38 C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-8, Fw-120Mm Od-208 Mm Bore-50Mm 39 C.S.Worm Shaft ( As Per Sample) For Mill 40 C.S. Mill Coupling (Weight 700Kg Approx) As Per Drawing 41 C.S. Mill Crown Pinion 16 Teeth (Weight 1500 Kg.) As Per Drawing 42 Cast Steel Spur Gear & Pinion On Conversion Basis 43 C.S. Trash Beam For Mill Size 33\X66\ As Per Drawing Approc Weight 1 Mt 44 Cast Steel & Spur Gear- 72 Teethface Width- 75Mm, Bore- 50Mm Od- 473 Mm, Module- 6.4. Approx Weight 90 Kg 45 Cast Steel & Spur Gear- 26 Teethface Width- 75Mm, Bore- 45Mm Od- 178.24 Mm, Module- 6.4- Approx Weight 11.6 Kg 46 Cast Steel Pinion- 24 Teethface Width- 70Mm, Bore- 45Mm Od- 166.4 Mm, Module- 6.4 -Approx Weight 9.7 Kg 47 Cast Steel Pinion- 34 Teethface Width- 75Mm, Bore- 40Mm Od- 308 Mm, Module- 8.56. Approx Weight 20 Kg 48 Cast Steel Gear Pinion- 50 Teeth As Per Drg No. Mills-138Approx Weight 11 Kg 49 Cast Steel Sprocket- 13 Teeth 6” Pitchas Per Drg. Mills-27 50 Cast Steel Pinion- 18 Teethface Width- 75Mm, Bore- 45Mm Od- 128 Mm, Module- 6.4.Approx Weight 5 Kg 51 C.S.Scaper For Mills Duly Machined As Per Sample Drg.No Ksc/Mh/91618 Approx Wt-190Kg Each 52 Cast Steel Trash Plate (Lenth 1680 Mm) Made Of Is 2708 Grade Iii Duly Rough Machined As Per Drg.No – Ksc/Mh/285/22 53 C.S. Wheel For Cane Unloader Bridge As Per Drg.No. Ksc/Unloader/2/17.Approx Wt 185 Kg. 54 C.S Gear 68 Teeth, Module-6.14Face Width-65Mm, O.D--430Mmdrg No.-Ksc/Unloder/17 55 C.S.Wheel For Cane Unloder Trolly Drg No.-Ksc/Cr/145 Approx.Wight-55Kg 56 C.S.Pinion-18Teeth, Module-6.14, F.W-65 Od-122.8 Drg. No.-Ksc/Unloder/17 57 C.S. Sprroket 6\ Pich 14 Teeth Drg No.-Ksc/M/1565 (Tail End) Material 2708 58 C.S. Sprroket 6\ Pich 14 Teeth Drg No.-Ksc/M/1564 (Driving Shaft) Material 2708 59 C.S.Sproket-36 Teeth For Duplex Chain 2 1/2\ Pitch Material 2708 Drg No Ksc/Boiler-163 60 C.S. Sprocket 17 Teeth For Duplex Chain 2 1/2\ Pitch Material 2708 Drg No-Ksc/Mill/4887 61 Opertuinity Device Of Trash Turner Beam Material-Ss Drg No. Mills-8488 62 C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-10, Fw-110Mm Od-260Mm Bore-50Mm 63 C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-8, Fw-120Mm Od- 208 Mm Bore-50Mm 64 C.S.Worm Shaft ( As Per Sample) For Mill. Last date of submission for this tender is 2026-06-03. This is a Boiler Supply tender in Kichha, Uttarakhand