Yamuna Expressway Industrial Development Authority

Yamuna Expressway Industrial Development Authority has published Jungle Cleaning, Kerb Stone Repair And Miscellaneous Work At 30.00Mtr Wide Road (Ch.-6.95To17.00Km), Yeida.Wc-3 - Clearing grass and removal of the rubbish upto a distance of 50m outside the periphery of the area cleared. UPPWD SOR 2 Tractor Trolly with driver & inclide POL. UPPWD SOR-2018/0039 3 Supplying and laying of goodearth in layers not exceeding 20cm in depth, breaking clods watering, rolling each layer with 1/2 tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions,All leads. AR. 4 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3(1cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge(length of finished kerb edging shall be measured for payment).(Precast C.C. kerb stone shall be approved by Engineer in charge) (Old) UPPWD SOR/16.69 5 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3(1cement : 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge(length of finished kerb edging shall be measured for payment).(Precast C.C. kerb stone shall be approved by Engineer in charge) (New) UPPWD SOR/16.69 6 Painting with Synthetic Enamal Paint. Two or More Coats on new work. UPPWD SOR/13.61.1 7 Road Delineator: Supply & Fixing of M S Delineator made of Mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion. The surface should beconceated so that there should not be any exposed surface without powder coating.The posts shall have Ian ellipsoidal or circular design with the height of the pole shall be 800 to 900 mm above the ground with about 200 to 300 mm base which can be anchored onto the ground overall length 1000 to 1200mm. The delineator is meant for application on gaps in median, traffic island, Dangerous bends, Roundabout, Narrow bridge etc or as desired by Site Enigneer. UPPWD SOR Sr. No./22.01/MORTH -805 (8.15) 8 Reflective Raised Pavement Markers (Road Studs / Cat Eye) Supply and fixing of reflective raised pavement marker with made of plastic body RPM/Road Stud shall be molded from ASA (Acrylic styrene Acrylonitrite) or HIPS (Hi- impact Polystyrene) or aa acrylonitrile butadiens styrenc (ABS). The marker shall supported a load of 1335 kg tested in accordance with ASTM D4280. The reflective panels shall consist of number of lenses containing single or dual prismatic cubes of providing total internal reflection of the light entering the lens face. Retro reflecting surface shall preferably be 35+ 5° to base and area of each retro- reflecting surface shall not be less than 13.0 Sqcm road studs shall be legibly marked with name trade mark or other means of identification of the manufacturer. Dimensions of road studs should not be less than 100 mm x100mm x10mm. RPM (with shank) as per ASTM. UPPWD SOR Sr. No./22.06/MoRTH -804 (8.35) 9 Solar Power Road Marker (Solar Studs) Supply and Fixing of solar stud shall be made of aluminium alloy and polycarbonate material with shall be absoulaty wheater resistent and strond enough to support a load of 13635 kg tested in accordance with ASTM D4280. Its color maybe white, red, yellow, green or combination by directed by Engnieer. The dimension of solor stud shall not be less than 100mm x 100mm x 10mm its shall have super bright LED so as to provide visibility from a distance 800 M. UPPWD SOR Sr. No./22.19/MORTH -804.6(8.35) 10 Tubular marker Spring Post or Sping Bollard Supply and fixing of plastic tubular bollard having 450mm to 700mm Height, shall be attached pavement to display the minimum 50mm width of reflective bands to the apporoching road to the user including labour, material, T&P etc for propar completion of the work. 700mm Height. UPPWD SOR Sr. No./22.38/IRC : SP-55-2014 . Last date of submission for this tender is 2024-11-27. This is a Environmental Decontimination Service tender in Gautam Buddha Nagar, Uttar Pradesh