Uttar Pradesh State Industrial Development Corporation Limited

Uttar Pradesh State Industrial Development Corporation Limited has published Tender For Annual Maintenance Works Of Different Kinds At I.A. Orai, Site-2 Distt-Jalaun. - Cleaning Jungle including uprouting of trunk vegetation grass, bush, wood, tries & saplings of girth upto 30 cm. measured at a height of 1 meters above grund level & removal of rubbish upto a distance of 50 meters out side the periphery of area cleared. 2 Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil 3 Cartage of ballast, kankar, coal, grit or sand etc. including loading and unloading but excluding stacking on pucca road (3 km) 4 Road marking with hot applied thermoplastic compound with reflectrorising glass beads on bituminous surface - paroviding and laying of hot applied thermoplastic compound 2.5mm thick including reflectrorising glass beads 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level uniform and free from streaks and holes. 5 First class brick work in 1:4 cement and coarse sand of 1.25 F.M. mortar in foundation and plinth including supply of all meterials, labour and T&P etc. required for proper completion of the work. 6 12mm thick plaster with cement mortar in proportion of 1:4 cement & fine sand of 1.25 F.M. 7 Brick work in super structure including necessary cutting and moulding of bricks as required and also including honey comb brick work, thickness of wall not to be less than 1.5 brick thick. 8 Providing and laying cement concrete 1:2:4 (1 cement, 2 coarse sand, 4 graded stone ballast 20 mm nominal size) including supply of all materials, labour and T&P etc. required for proper completion of the work and curing complete also including cost of form work in foundation & floors. 9 Providing and laying cement concrete 1:4:8(1 cement, 4 coarse sand, 8 graded stone ballast 40 mm nominal size) including supply of all materials labour and T&P etc. required for proper completion of the work and curing complete, also including cost of form work in foundation and floors. 10 Earth work in excavation for foundation in ordinary soil (loam, clay, or sand) including lift up to 1.50 m and lead up to 30.00 m and also including filling watering and ramming of excavated earthand disposal of surplus earth as directed by the Engineer In charge up to a lead of 50.00 m. 11 Mild steel or iron work in heavy sizes such as trusses builts up gates, door frames, reocrd racks, roof work, gates etc, wrought to required form including drilling holes, rivetting or welding where necessry and also including supply of steel, bolts, nuts etc & their fixing required for proper completion of the work. 12 Painting or varnishing on iron works in small areas or new wood work with one coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of work. Paint to be used should confirm to the ISI No. 103. 1950 13 Finishing walls with water proof cement paint of approved make and quality on new work with two coats to give an even shade including supply of all materials, labour and T&P etc required for proper completion of the work. 14 Supply of JCB machine with POL & operator 15 Supply of Tractor & trrolly include driver & POL 16 Supply of Beldar (unskilled) Granolethic cutter / collie / mazdor 17 Supply of mate 18 Hiring of sweepers with T&P 19 Construction of Granular sub base by providing Coarse gradede material spreading in uniform layers with layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting Vibratory roller to achieved the desired density complete as per clause 401 . 20 Providing, Laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub-base/base course on well prepared surface and compacting with vibratory roller to achieve the desired density. 21 Providingandlayingof80mminterlocking concreteblockpavementlaidinstonedustbase and fill joint with fine send, joint filled after labling and dressing base including supply of all material, labourT&Petcrequiredforpropercompletionofthe work. 22 Lettering with black Japan paint of approved brand and manufacture. 23 Refelctive raised pavement markers (Road Studs / Cat Eye) Supply and fixing of reflective raised pavement marker with its body surface made of tough ASA (Acrylic styrene acrylontire) of HIPS (Hi impact polystyrene) of acrylonitrile butadiens styrenc (ABS). The marher shall supported a load of 1355 kg tested in accordance with ASTMD 4280 and its reflective panels shall consist if number of lenses containing single or dual prismatic cubes of providing total internal reflection of the light entering the lens face. Retro reflective surface shall preferably be 35 + 5o to base and areas of each retro-reflective surface shall be not be less than 13.0 sqcm road studs shall be legibly marked with name trade mark or other means of identification of the manufacturer. Dimensions of road studs should not be less than 100mm X 100mm X 10mm . Last date of submission for this tender is 2025-07-08. This is a Tree Cutting tender in Orai, Uttar Pradesh