Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited

Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited has published Supply Of Belt Feeder And Belt Conveyor Of Raw Coal Feeder For 5X200mw Units, Btps, Obra, Sonebhadra , Vulcanized Endless Rubber Belt Conveyor For Raw Coal Feeder (Type Of R.C. Feeder: 24, Model-Gf27) Specifications: 1. Length: 3400Mm±10 Mm (Inner Circumference: 3410 To 3390) 2. Width: 838Mm ±4Mm 3. Total Thickness: 7.1 Mm (Tolerance Allowed Upto 0.4Mm) 4. Top Cover: 3.00 Mm (Tolerance Allowed Upto ±0.2Mm) 5. Bottom Cover: 2.00 Mm (Tolerance Allowed Upto ±0.2Mm) 6. Grade: M 24 As Per Is 1891/1991 (Part-I) 7. Tensile Strength: Minimum 400 Kn/M Width (In Wrap Direction) 8. Adhesion Strength Between Plies Min. 4-5 Kn/M Width 9. Adhesion Strength Between Cover & Ply: Min. 3-5 Kn/M Width 10. Surface Hardness In Rubber Cover Specimen: 65 ±5 Shore A 11. Abrasion Resistant: The Abrasion Loss Must Be Maximum# 150 Mm³ When Abrasion Test Is Conducted As Per Is:3400-3 12. Working Temperature: 80 ± 10°C 13. Maximum Instantaneous Temp.: 200°C 14. Self-Life: Min. 02 Years 15. No Of Plies: 03 16. Skirting: 45 Mm High Skirting On Both Sides, 45 Mm Wide At Base, 18 Mm Wide At Top, 06 Mm High Projection Is At The Center The Length Inside The Belt. , Vulcanized Endless Rubber Belt Feeder For Raw Coal Feeder (Type Of R.C. Feeder: 24, Model-Gf27) Specifications: 1. Length: 5025Mm±20 Mm (Inner Circumference: 5045 To 5005) 2. Width: 830Mm ±4Mm 3. Total Thickness: 7.1 Mm (Tolerance Allowed Upto 0.4Mm) 4. Top Cover: 3.00 Mm (Tolerance Allowed Upto ±0.2Mm) 5. Bottom Cover: 2.00 Mm (Tolerance Allowed Upto ±0.2Mm) 6. Grade: M 24 As Per Is 1891/1991 (Part-I) 7. Tensile Strength: Minimum 400 Kn/M Width (In Wrap Direction) 8. Adhesion Strength Between Plies: Min. 4-5 Kn/M Width 9. Adhesion Strength Between Cover & Ply: Min. 3-5 Kn/M Width 10. Surface Hardness In Rubber Cover Specimen: 65 ±5 Shore A 11. Abrasion Resistant: The Abrasion Loss Must Be Maximum 150 Mm³ When Abrasion Test Is Conducted As Per Is:3400-3 12. Working Temperature: 80 ± 10°C 13. Maximum Instantaneous Temp.: 200°C 14. Self-Life: Min. 02 Years 15. No Of Plies: 03 16. Skirting: 45 Mm High Skirting On Both Sides, 45 Mm Wide At Base, 18 Mm Wide At Top, 06 Mm High Projection Is At The Center The Length Inside The Belt. , Vulcanized Open Ended Zip Rubber Belt Feeder For Raw Coal Feeder (Type Of R.C. Feeder: 24, Model-Gf27) Specifications: 1. Length: 5025Mm±20 Mm (Inner Circumference: 5045 To 5005) 2. Width: 830Mm ±4Mm 3. Total Thickness: 7.1 Mm (Tolerance Allowed Upto 0.4Mm) 4. Top Cover: 3.00 Mm (Tolerance Allowed Upto ±0.2Mm) 5. Bottom Cover: 2.00 Mm (Tolerance Allowed Upto ±0.2Mm) 6. Grade: M 24 As Per Is 1891/1991 (Part-I) 7. Tensile Strength: Minimum 400 Kn/M Width (In Wrap Direction) 8. Adhesion Strength Between Plies Min. 4-5 Kn/M Width 9. Adhesion Strength Between Cover & Ply: Min. 3-5 Kn/M Width 10. Surface Hardness In Rubber Cover Specimen: 65 ±5 Shore A 11. Abrasion Resistant: The Abrasion Loss Must Be Maximum 150 Mm³ When Abrasion Test Is Conducted As Per Is:3400-3 12. Working Temperature: 80 ± 10°C 13. Maximum Instantaneous Temp.: 200°C 14. Self-Life: Min. 02 Years 15. No Of Plies: 03 16. Skirting: 45 Mm High Skirting On Both Sides, 45 Mm Wide At Base, 18 Mm Wide At Top, 06 Mm High Projection Is At The Center The Length Inside The Belt. , Vulcanized Open Ended Zip Rubber Belt Feeder For Raw Coal Feeder (Type Of R.C. Feeder: 24, Model-Gf27) Specifications: 1. Length: 5025Mm±20 Mm (Inner Circumference: 5045 To 5005) 2. Width: 830Mm ±4Mm 3. Total Thickness: 7.1 Mm (Tolerance Allowed Upto 0.4Mm) 4. Top Cover: 3.00 Mm (Tolerance Allowed Upto ±0.2Mm) 5. Bottom Cover: 2.00 Mm (Tolerance Allowed Upto ±0.2Mm) 6. Grade: M 24 As Per Is 1891/1991 (Part-I) 7. Tensile Strength: Minimum 450 Kn/M Width (In Wrap Direction) 8. Adhesion Strength Between Plies Min. 4-5 Kn/M Width 9. Adhesion Strength Between Cover & Ply: Min. 3-5 Kn/M Width 10. Surface Hardness In Rubber Cover Specimen: 65 ±5 Shore A 11. Abrasion Resistant: The Abrasion Loss Must Be Maximum 150 Mm³ When Abrasion Test Is Conducted As Per Is:3400-3 12. Working Temperature: 80 ± 10°C 13. Maximum Instantaneous Temp.: 200°C 14. Self-Life: Min. 02 Years 15. No Of Plies: 03 16. Skirting: 45 Mm High Skirting On Both Sides, 45 Mm Wide At Base, 18 Mm Wide At Top, 06 Mm High Projection Is At The Center The Length Inside The Belt. , Vulcanized Endless Rubber Belt Feeder For Raw Coal Feeder (Type Of R.C. Feeder: 24, Model-Gf27) Specifications: 1. Length: 5025Mm±20 Mm (Inner Circumference: 5045 To 5005) 2. Width: 830Mm ±4Mm 3. Total Thickness: 7.1 Mm (Tolerance Allowed Upto 0.4Mm) 4. Top Cover: 3.00 Mm (Tolerance Allowed Upto ±0.2Mm) 5. Bottom Cover: 2.00 Mm (Tolerance Allowed Upto ±0.2Mm) 6. Grade: M 24 As Per Is 1891/1991 (Part-I) 7. Tensile Strength: Minimum 450 Kn/M Width (In Wrap Direction) 8. Adhesion Strength Between Plies: Min. 4-5 Kn/M Width 9. Adhesion Strength Between Cover & Ply: Min. 3-5 Kn/M Width 10. Surface Hardness In Rubber Cover Specimen: 65 ±5 Shore A 11. Abrasion Resistant: The Abrasion Loss Must Be Maximum 150 Mm³ When Abrasion Test Is Conducted As Per Is:3400-3 12. Working Temperature: 80 ± 10°C 13. Maximum Instantaneous Temp.: 200°C 14. Self-Life: Min. 02 Years 15. No Of Plies: 03 16. Skirting: 45 Mm High Skirting On Both Sides, 45 Mm Wide At Base, 18 Mm Wide At Top, 06 Mm High Projection Is At The Center The Length Inside The Belt.. Last date of submission for this tender is 2025-02-24. This is a Conveyors And Accessories tender in Obra, Uttar Pradesh