Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited

Uttar Pradesh Rajya Vidyut Utpadan Nigam Limited has published Tender For Procurement Of Fire Fighting Equipments For Cisf In Htps Kasimpur , Cylindrical Shape, Upright Operation Type Having Capacity 9Ltr. Water Type (Gas Cartridge) Fire Extinguisher As Per Is: 15683 / 2006 And Amendment 2018 With Isi Marked Shall Be Complete With Following:-#1) The Material For The Construction Of Siphon Tube, Ap Assembly And Safety Clip Shall Be Of Stainless Steel (Is: 6913).#2) Gas Cartridge Of 40 Gm Capacity Shall Be As Per Is: 4947/1985 With Isi Marked And Content Shall Be As Per Is: 15222-2002.#3) The Inner Surface Of The Extinguisher Shall Be Coated With Xy Polyester Powder Coating For Anti-Corrosion Treatment And Shall Pass All Test Mention In Is: 15683 / 2006 And Amendment No. 1 December 2008.#4) The Manufacture Shall Have The Following Valid License:-#A) Certificate For Manufacturing From Bis, B) Certi Ate For Isi Mark From Bis##5)Extinguisher Should Meet All Requirement And Test As Per Is 15683 / 2006 (Reaffirmed 2018).#6) A Spare Filled Gas Cartridge Should Be Provided With Each Fire Extinguisher# , Cylindrical Shape, Upright Operation Type Having Capacity 9 Ltr. Mechanical Foam Type (Gas Cartridge) Fire Extinguisher As Per Is: 15683 / 2006 And Amendment 2018 With Isi Marked Shall Be Complete With Following:-#1) The Material For The Construction Of S Hon Tube, Cap Assembly And Safety Clip Shall Be Of Stainless Steel (Is: 6913).#2) Refill Pack Of 270 Ml Afff 3 % Shall Be As Per Is # 4989/1985 And It Should Be Provided Separately In Pvc Cans.#3) Gas Cartridge Of 60 Gm Capacity Shall Be As Per Is: 4947/1 With Isi Marked And Content Shall Be As Per Is: 15222-2002.#4) One Spare Gas Cartridge With Each Extinguisher Should Also Be Provided.#5) The Inner Surface Of The Extinguisher Shall Be Coated With Epoxy Polyester Powder Coating For Anti Corrosion Treatment And Shall Pass All Test Mention In Is: 15683 / 2006 And Amendment 2018.#6) A Spare Filled Gas Cartridge Should Be Provided With Each Fire Extinguisher#7) The Manufacture Shall Have The Following Valid License:-#A) Certificate For Manufacturing From Bis# B Tificate For Isi Mark From Bis# Extinguisher Should Meet All Requirement And Test As Per Is 15683 / 2006 And Amendment 2018# , Cylindrical Shape, Upright Operation Type, Having Capacity 06 Kg., Dry Chemical Powder (Gas Cartridge) Type Fire Extinguisher As Per Is: 15683 / 2006 And Amendment 2018 With Isi Marked Shall Be Complete With Following:-#1) The Material For The Construction Of Siphon Tube, Cap Assembly, And Safety Clip Shall Be Of Stainless Steel (Is: 6913).#2) Inner Container Shall Be M S Sheet Confirming To Grade Any Of Is 513, Is 3074 Or Is 3601.#3) Refill Pack Of 90% Mono Ammonium Phosphate Base D.C.P. Of 06 Kg Pack Shal E As Per Is # 14609-1999 And It Should Be Provided In Hermetically Sealed Moisture Proof Plastic Bags.#4) Gas Cartridge Shall Be As Per Is: 4947/1985 With Isi Marked And Content Shall Be As Per Is 15222-2002. One Spare Gas Cartridge Should Also Be Provide 5) The Inner Surface Of The Extinguisher Shall Be Coated With Epoxy Polyester Powder Coating For Anti-Corrosion Treatment And Shall Pass All Test Mention In Is: - 15683 / 2006 And Amendment 2018#6) The Manufacture Shall Have The Valid License For The Cert Ication Of Isi Mark From Bis.#7) A Spare Filled Gas Cartridge Should Be Provided With Each Fire Extinguisherextinguisher Should Meet All Requirement And Test As Per Is 15683## , Specification Of 50 Kg Dcp Trolley Mounted Fire Extinguisher#1. Trolley Mounted Dcp Fire Extinguisher Is: 16018:2012 (Reaffirmed 2018) 50 Kg Capacity Having Abc Powder (As Per Is- 14609-1999) With Gun Metal Cap.#2. Extinguishing Media- Abc Powder (As Per - 14609-1999)#3. Propellant- Co2 Cylinder Conforming To Is-7285 (Cap. 2Kg) As Expellant Media. #4. Effective Discharge - 85% -100%#5. Pressure Requirements-# - Test Pressure (Pt)- 1.43 X P Ms But Not Less Than 2 Mpa (20Bar )#- Burst Pressure (Pb)-2.7 X P Ms Ot Less Than 5.5 Mpa (55Bar)#6. Copper Tubing Or High Pressure Hose - Copper Tubing Shall Conform To Bursting Pressure Of 275 Kgf/Cm2 Or Wire Braided High Pressure Hose As Per Is 14933:2001.#7. Discharge Hose:- Discharge Hose Shall Be Of Braided Rubber O Vc Of Nominal Bore 19 Mm Diameter Fitted With Not Less Than 5Mtr. The Hose Shall Have Bursting Pressure Of Not Less Than 50 Kgf/Cm2#8. General Operating Performance Requirements -#A) Hydraulic Test:-The Extinguisher Shall Be Tested To An Internal Hydraulic Pressure Of3.0 Mn/M2 (30 Kgf/Cm). The Test Pressure Shall Be Held For A Minimum Period Of Two And A Half Minutes During The Test, It Shall Not Show Any Sign Of Leakage)Bursting Test:-In Case Of Hydraulic Burst Test, Failure Shall Not Occur At A Press , Specification Of Co2 Extinguishers 4.5 Kg Capacity: ##1. Isi Marked Co2extinguisher 4.5 Kg Capacity Shall Conform To Is 15683:2006 & 2018#2. Co2 Used In The Extinguisher Shall Conform To Is 15222.#3. The Maximum Filling Density Shall Not Exceed 0.75Kg/L.#4 L Be Capable Of Operating Reliably With The Temperature Ranges Specified By Is 15683-2006.#5. Minimum Effective Discharge Time And Bulk Release Of Discharge Shall Comply With Is 15683-2006. #6. Shall Have A Mechanical Resistance Complying With Is 15683-200 . Shall Have Been Passed Internal And External Corrosion Resistance Test As Per Is 15683-2006. #8. Shall Have Been Passed Tapping Test As Per Is 15683-2006. #9. Should Not Retain 10% Of The Initial Charge After Discharge.#10. Shall Have Been Passed Electric Conductivity Test As Per Is 15683-2006.#11. Steel Body Should Conform To Is 7285 And The Base Of The Body Should Be Of Concave Shape.#12. The Minimum Burst Pressure Shall Be 2.7 X Maximum Service Pressure.#13. Shall Pass Volumetric Expansion Test As Per Is 83-2006.#14. Discharge Tubes And Discharge Horn Should Pass Burst Pressure Test As Per Is 15683-2006. The# Discharge Horn Shall Withstand A Crushing Force Of 25 Kg. #15. Color Of The Extinguisher Shall Conform To Shade No 538 Of Is 5 And Paint Shall Conform. Last date of submission for this tender is 2024-11-26. This is a Machine Tools tender in Kasimpur, Uttar Pradesh