Uttar Pradesh Power Transmission Corporation Limited

Uttar Pradesh Power Transmission Corporation Limited has published Civil Work Related To New 500 Mva Transformer Against Damaged 500 Mva Transformer At 400 Kv Gis S / S Sector-148 Noida.- 1 Dismantling Brick Work Or Stone Work In Lime Or Cement Mortar Andincluding Stacking Of Materials As Directed By Theengineer-In-Charge Within A Distance Of 60 Metres. ( Csi No. 15.01 ) 2 Dismantling Of Existing R.C.C. Gantry / Auxiliary Foundation With The Help Of Mechanical Means In Switchyard Including Disposal Of Refuse / Debris As Per Direction Of Engineer - In - Charge. Including All Labour And T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 15.15 ) 3 Dismantling Cement Concrete Or Brick Or Granolithic Floorsincluding Base Concrete And Including Stacking Of Dismantledmaterials As Directed By The Engineer In-Charge Within A Distanceof 60 Metres. ( Csi No. 15.05 ) 4 Dismantling Of Griders, Trusses And Other Steel Works Including Stcking Of Materials As Directed By Engg-In-Charge Within A Distance Of 60 Mtrs. ( Csi No. 15.08 ) 5 Dismantling Existing Plaster Including Disposal Of Refuse Asdirected By The Engineer-I / C Within A Distance Of 60 M. ( Csi No. 15.11 ) 6 Rcc Work With Cement, Approved Coarse Sand ( F.M. 1.8 To 2.5 ) And2 Cm Gauge Graded Approved Hard Stone Ballast Like Granite Quartzite Etc From Dalla, Jhansi Or Other Quarries In Proportion1:1.5:3 In Raft Foundation And Footings , Excluding Supply Of Reinforcement & Its Bending But Including Its Fixing And Binding The Same With Binding Wire, Including Cost Of All Other Materials Labour And T&P. ( Csi No. 5.27 ) 7 Rcc Work With Cement, Approved Coarse Sand ( F.M. 1.8 To 2.5 ) And2 Cm Gauge Graded Approved Hard Stone Ballast Like Granite Quartzite Etc From Dalla, Jhansi Or Other Quarries In Proportion1:1.5:3 In Rcc Pile Caping, Gantry Walls / Columnfoundations And Rcc Pedestals , Excluding Supply Of Reinforcement & Its Bending But Including Its Fixing And Binding The Same With Binding Wire, Including Cost Of All Other Materials Labour And T&P. ( Csi No. 5.28 ) 8 Mild Steel Or Iron Work In Heavy Sizes Such As Trusses Built Upgates, Door Frames, Record, Racks Roof Work Gates Etc. Wrought Torequired Form Including Holes Rivetting Or Welding Where Necessary And Also Fixing In Proper Position And Alignment Including Cost Of All Materials Supplied By Contractor. ( Csi No. 9.01 ) 9 Tmt / Tor Steel In Plain Work Such As Reinforced Concrete Orreinforced Brick Work ( When Not Included In An Over All Rates ) Wrought To Required Shape As Necessary Including Bending Forproper Completion Of The Work And Including Supply Of Steel Its Wastage, Bend, Hooks And Authorized Overlapping Shall Be Measured. ( Steel Shall Be Arranged By The Contractor ) ( Csi No. 9.03 ) 10 First Class Brick Work In 1:4 Cement And Coarse Sand ( F.M.1.8 To 2.5 ) Mortar In Foundation And Plinth Including Supply Of Allmaterials, Labour & T&P Etc. Required For Proper Completion Of Work ( Csi No. 6.03 ) 11 12 Mm Thick Plaster With Cement Mortar Consisting Of One Part Of Cement & Four Part Of Coarse Sand ( 1:4 ) , Minimum Thickness Not To Be Less Then 10 Mm Including Supply Of All Material, Labour And T&P Etc For Proper Completion Of Work. ( Csi No. 11.07 ) 12 Supplyof 25 Mm Dia.M.S. Anchor Bolts ( Conforming To Is-226 ) 500 Mmlong With Base Plate ( 50X50x6 Mm ) Welded With Anchor Bolts, Including Its Threading Upto A Length Of 10Cm. And Galvanizing Upto 15Cm From Top, Also Supply Of A Pair Of Galvanized Standard Nuts With Threading Including Supply Of 5Mm Thick Washer And Cost Of Labour Material And T&P Etc. Required For Proper Completion Of The Work. ( Csi No. 9.14 ) 13 Fixing And Grouting 25 Mm Dia M.S. Anchor Bolt In Proper Alignment Level And Setout With The Help Of A Template Including Supply Of All Labour T&P Etc. Reqd. For Proper Completion Of The Work. ( Labour Rates Only ) . ( Csi No. 9.15 ) 14 Supplying And Filling 75 Mm To 115 Mm Size Bolders In Chillingtank Completeincluding Supply Of All Materials, Labour And Tools And Plants Etc. Required For Proper Completion. ( Voides 30 % Shall Be Deducted During Measurement ) . ( Csi No. 5.30 ) 15 Painting Or Varnishing New Iron Work In Small Areas Or New Woodwork With One Coat Of Ready Mixed Priming Paint And One Coat Ofapproved Superior Quality Ready Mix Paint Luxol Or Equivalentbrand Or Varnish Including Supply Of All Materials, Labour And T&P Etc. Required For Proper Completion Of The Work. Paint To Be Used Should Conform To The I.S. 103-1950. ( Csi No. 13.01 ) 16 As In Csi 13.01 Above But For Every Coat After First Coat. ( Csi No. 13.02 ) 17 First Class Bricks On Edge Floor Laid Dry, Joints Sand Filled, Including Preparation Of Base To Proper Slope And Its Rammingincluding Supply Of All Material Labour & T&P Etc. Required Forproper Completion Of The Work. ( Csi No. 12.07 ) . Last date of submission for this tender is 2022-04-25. This is a Bolts tender in Noida, Uttar Pradesh