Rural Engineering Department

Rural Engineering Department has published Tender For Construction Of Mini Shop Hot At Gram Panchayat Marui. - Earthworkinexcavationbymechanicalmeans(Hydraulicexcavator) / manual means in foundationtrenchesor drains (not exceeding1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. as per DSR 2.8.1 2 Providingandlayingin positioncementconcreteofspecifiedgrade excludingthe cost of centeringand shuttering- All workup to plinth level : 1:4:8(1 Cement: 4 coarsesand (zone-III)derivedfrom natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) as per DSR 4.1.8 3 Providingandlayinginpositionspecifiedgradeofreinforcedcement concrete, excludingthecostofcentering,shuttering,finishingand reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) as per DSR 5.1.2 4 Centeringand shuttering includingstrutting, proppingetc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts as per DSR 5.9.6 5 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) as per DSR 6.1.2 6 Providingandlayinginpositionspecifiedgradeofreinforcedcement concrete, excludingthecostofcentering,shuttering,finishingand reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) as per DSR 5.1.2 7 Centeringand shuttering includingstrutting, proppingetc. and removal of form for Lintels,beams,plinthbeams,girders,bressumers and cantilevers as per DSR 5.9.15 8 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5in Super Structure in: Cement mortar 1:6 (1 cement : 6 coarse sand) as per DSR 6.3.1 9 Earth work filling in plinth in Rooms By cartege up to 6 km distance I/C all material labour T&P proper complition to the work . As per Analysis 10 Reinforcedcementconcreteworkinwalls(anythickness),including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments,postsand strutsetc. aboveplinthlevel up to floorfivelevel,excludingcostofcentering,shuttering,finishingand reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derivedfrom natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) as per DSR 5.2.2 11 Centeringand shuttering includingstrutting, proppingetc. and removal of form for Lintels,beams,plinthbeams,girders,bressumers and cantilevers as per DSR 5.9.15 12 Reinforcedcementconcreteworkinwalls(anythickness),including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments,postsand strutsetc. aboveplinthlevel up to floorfivelevel,excludingcostofcentering,shuttering,finishingand reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derivedfrom natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) as per DSR 5.3 13 Centeringand shuttering includingstrutting, proppingetc. and removal of form forSuspendedfloors,roofs,landings,balconiesandaccess platform as per DSR 5.9.3 14 SteelreinforcementforR.C.C.workincludingstraightening,cutting, bending, placing in position and binding all complete upto plinth level. Cold twisted bars as per DSR 5.22.3 15 Providing and fixing of in position CollapsibleShutter of 80x1.25 mm M.S. laths with 1.25 mm thick Top cover DSR.Cod 10.6.1 16 12 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) as per DSR 13.1.2 17 12 mm cement plaster on rough side of mix :1:6 (1 cement: 6 fine sand) as per DSR 13.2.2 18 Providing and layingCota Stone in floor with1:4 cementMorter Including all complite. as perDSR 11.26.1 19 Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : Newwork(twoormorecoats)overandincludingwater thinnable priming coat with cement primer having VOC content less than50 gram/litre as per DSR 13.41.1 20 Finishing walls with Premium Acrylic Smooth ( Rastic ) exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) as per DSR 13.47.1 21 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work as per DSR 13.61.1 22 Supply of informatory M.s sign board size 1.20*0.90 m made of 0.80mm M.s sheet fixed in ISA 40*40*5mm,frame supported in back side by 32*5mm flat iron on all four side along with two vertical post of 2.90m from bottom of frame of angle iron ISA 40*40*5mm with 0.25m long horizontal leg electrically welded and painted with one coat synthetic enamel paint I/c 23 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit,with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. I/C DSR 1.10.3 GROUP (C) 24 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.I/C as per dsr 1.12 25 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire I/c as per dsr 1.14.1 26 5/6 A switch 27 3 pin 5/6 A socket outlet 28 15 Amper switch 29 15 Amper socket 30 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.I/c as per Dsr 1.25 31 Supplying and fixing following way, horizontal type three pole and neutral (TPN), sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)4 way (4 + 12), Double doorI/c as per Dsr 2.4.1 32 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single poleI/c as per dsr 2.10.1 33 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.I/C as per dsr 19.1 34 Supply and fixing of LED Bulb Light suitable for up toon surface complete in all Respect .Sanctioned by S.E. RED.VNS Est 3dt.30.11.2018 code 1413 35 S/F of hexagonal fan box with hexagonal side of approx 80mm in length fabricated from 16SWGM.S. sheet incorporating 10mm dia, M.S. round barduly bent for supporting fan hanger dully painted withred oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all materials, labour T & P etc., for proper completion of work. I/c as per s.i 1149 . Last date of submission for this tender is 2025-10-14. This is a Building Work tender in Vikas, Uttar Pradesh