Rural Engineering Department

Rural Engineering Department has published Tender For Construction Work Of Marriage Hall In Village Gahrauli Located In Development Block Muskara - Cleaning of Jungle and cutting of Grass I/C all Comp.As per 2.32 2 Boring holes of pile 30 cm & DUR with hand operated augar set depth 3.50 m all comp. I/C all Comp. as p.w.d s.o.r. 3 E/W in excavation in foundation in bc soil I/C 30.00 M lead and lift upto 1.50 m all Comp. SI as per 2.1 4 R.C.C. work in 1:1.5:3 c/s and 20 mm Gauge GS Grit in PileI/ C all comp. and pile cap as per 5.1.2 5 R.C.C. work in 1:1.5:3 with Cement, C/s sand and 20 mm gauge stone grit in footing / pile cap as per AR-II 6 R.C.C. work in 1:1.5:3 c/s and 20 mm Gauge GS Grit in Plinth beamI/ C all comp 7 1st Class Brick work in 1:6 c/s mortar upto Plinth Level I/C all Comp. As per 6.1.2 8 DPC in 1:1.5:3 c/s and 13 mm Guage GS grit I/C all Comp. as per p.w.d s.o.r. 9 Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 8 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc complete as per AR-I 10 Providing and injecting of antitermite treatment I/C all Comp as per P.W.D SOR 2020 11 Laying of coarse sand filling in floor I/C all Comp.As per 2.27 12 CC in 1:4:8 c/s and 40 mm Gauge GSB in Foundation I/C all Comp.As per 4.1.8 13 CC Flooring in 1:2:4 c/s and 20 mm Gauge GS Grit with one Layer of neet cement 4 cm thick without basecone. I/C all Comp. as per 11.30 14 Ist Class Brick work in 1:6 c/s mortar in Super structure I/C all Comp as per 6.1.2 15 Ist Class Brick work in 1:4 c/s mortar I/C all Comp. as per 6.1.1 16 S/F of 40 mm wide and 4 mm thick Glass Strips in appron I/C all Comp. as per 11.13.1 17 PCC in 1:2:4 c/s and 20 mm Gauge GS Grit I/C all Comp. As per 5.1.3 18 RCC work in 1:1.5:3 c/s and 20 mm Gauge GS Grit in Lintel and sunshed I/C all Comp. as pe 5.2.2 19 RCC work in 1:1.5:3 c/s and 20 mm Gauge GS Grit in Slab beam I/C all Comp.In Slab & T Beam as per 5.3 20 RCC work in 1:1.5:3 c/s and 20 mm Gauge GS Grit in Slab beam I/C all Comp.In Slab & T Beam as per 5.3 21 MS Tor steel work in RCC I/C cutting, bending and moulding etc as per 5.22.6 22 Bearing plaster in 1:3 c/s mortar 12mm thick neat cement finish I/C all Comp. as per 13.7.1 23 Painting over DPC with bitumin as per DSR-4.13 =(113.85*0.781*1.06) 24 12 mm thick cement plaster in 1:6 c/s moratr I/C all Comp. In outer side in plainsurface I/C all Comp. as per 13.1.2 25 15 mm thick cement plaster in 1:6 c/s moratr I/C all Comp. In inner side in roughsurface I/C all Comp. as per 13.2.2 26 12 mm thick cement plaster in 1:4 c/s mortar I/C all Comp.13.1.1 27 S/F of angle iron door frame chaukhat size (40 x 40 x 6) mm size As per 10.31 28 Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design fixing with carbon steel galvanised dash fastener of required dia and size as per DSR-10.11.2 =(109.15*0.781*1.06) 29 S/F of Glass panes 5.50 mm thick ISI mark quality with putty and brass spring in window shutter I/C all Comp. As per 10.30.2 30 Approximate cost of oxidized iron fitting with screw for doors and window I/C all Comp. as per P.W.D. S.O,R. 2020 31 S/F of 100 mm Long hings in door chaukhat frame I/C all Comp. as per P.W.D. S.O.R. 32 B/F of Hexagonal type fan box I/C all Comp. SI No. 730(7) as per p.w.d S.O.R. 33 Making of groove in wall at plinth beam ,DPC, Coloumn andLintelband at time of plasterI /C all Comp. 34 Making of drip coarse in sun shed or facica I/C all Comp.As per 5.3.0 35 S/ F of 100 mm of PVC Rain water pipe down I/C all Comp. as P.W.D. S.O.R 36 Providing and laying ofvetrified tiles thick 8 - 10 mm of (600 x 600) mmsize in flooring and sckirting I/C all Comp. as per 14.41.2 37 Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer,over the plasterd wall surface even and smooth surface as per Ch-15, Item-25 38 one Coat priming and two coat of acrylic distemper on new work in wall I/C all Comp.As per 13.41.1 39 Finishing walls with water proof cement paint of approved make and quality on new work with three coats to give an even shade. Including supply of all materials, labour and T&P etc.required for proper completion of the work as per SI No. 660 + 661 40 Painting or varnishing on iron works in small areas or new wood work with one coat of ready mix priming paint & three coat of approved superior ready mixed paint of clear syunthetic varnish including supply of all materials, labour and T&P etc. required for proper completion of work. as per SI No-641+642 41 S/F of Granite Stone with Piller I/C all Comp. 42 Wiring pont for light with 1.0 Sq.mm Frlsh P.V.C. insulated multistrand single core copper conductor cable in P.V.C. conduit pipe partly concealed inth wall and partly laid in slab alogwith the reinforement before continuity wire drawn inside the conduit, piano type modular switch and ceilling rose/ angle/battan holder Including supply of all material labour etc light point 43 Same AS in Item No.-42 but for fan point 44 Same AS in Item No.-42 but for 5 Amp plug 45 LED light 18 watt 46 celling fan 47 MCB 48 batten holder 49 electric regulator 50 SWITCH BOX MADE UP 16 S.W.G. MS sheat of 200X250X65 mm size 51 switch box made up 16 s.w.g.ms sheat of 250X300X65 mm size 52 s/f 100 amp four pole change over i/c all si 378 53 s/f factory wired hpf box type flurescent tube light fitting si 453 54 p/f of earthing comp si 702 . Last date of submission for this tender is 2025-02-03. This is a Building Work tender in Hamirpur, Uttar Pradesh