Rural Engineering Department

Rural Engineering Department has published Tender For Repair Work At Government Inter College Bhaguwala, 1 Excavation in fdn. in ordinary soil l/e lift up to 1.5m & lead up to 30m 1/cdisposal of surplus earth etc. complete as per SI No.251 2 Cement Concrete in 1:4:8 with Cement, C/Sand 2.20 F.M and 4cm gauge stone ballast in foundation & under floor i/e all etc. complete in all respects as per S.I.No. 281 3 M150 class B/W in 1:4 with cement and C/sand 2.20 Fm.mortar in plinth & foundation i/c all complete. As Chapter-6 S.1.No305(a) 4 R.C.C. work in 1:1.5:3 with Cement,coarse sand and 2cm guage stone grit for slab. i/c all etc.complete in all respects as per S.I.No. 283 A 5 Mild steel /iron work such as R.C.C. work i/c all etc. complete as per S.I.No.504. 6 Dismantling Damage plaster ic disposal of refuse as 6 directed by Engineer-in-charge with in a distance of 60 meter as per S.I. No. 706 7 Scraping of old white or colour wash including disposal of refuse as directed by Engineer-in-charge with in a distance of 60 meter as per S.1. No. 708 8 Scraping of enamle paint of old door and window including disposal of refuse as directed by Engineer-in- charge with in a distance of 60 meter as per S.1. No. 708 9 12mm thick plaster with cement and coarse sand 2.25 fm in 1:4 over brick work including supply of all material, labour T&P etc. required for proper completion of work S.1 No 584 10 Providing Wall Putty on Old surface with approvel quality material of berjer/j.k./birla etc make 2 coatesi/c all etc complete chapter no. 15 New Item -11 11 Providing Wall Putty on Old surface with approvel quality material of berjer/j.k./birla etc make 2 coatesi/c all etc complete chapter no.15 New Item-11 12 Distempering two coat with oil bound distemper of approved quality and shade on undecorated wall surface to with an even shade over and including a primer coat after thoroughly brushing the surface and Applying wall putty on plastered surface of Birla or J.K. brand including supply of all material labour T&P etc. required for proper completion of work (S.I.No-649-650-New) 13 finished wall with water proof weather coat of Apex super paint of approved make and quality on new work with two coats to given an even surface and shade over one coat of priming surface with water proof putty including supply of all coat of priming surface including supply of all material, labour T&P etc. (Chapter No- 15 New Item No.- 8+9+12) 14 Painting two coat over priming coat on wood or steel and other metal surface with superior synthetic enamel paint of approved make brushing to given an even surface and finished and including cleaning the surface including cost of material and scoured with wire brushes fine steel/wood scrappers sand papering including coat of all and including supply of all material labour T&P etc. required for proper completion of work (Chapter-15 New-2+3(iii)) 15 Float glass panes of 5 mm thicness/weight not less than 12.50kg/sqm) DSR 21.3.2 16 Supply & Fixing of 6-8 mm thickVitrifide Tiles first quality of flooring or skirting or dado laid with 1:3 cement & app. c/sand i/c all etc comp. as per SI.No.ch.-14 new item 5 17 Supply and fixing thick china glazed tiles of first quality in skirting or dado laid with 1:3 cement and approved coarse sand mortar finished with white cement slurry jointing and polishing complete including supply of all materials, labour and T& P etc.required for proper completion of the work as per S.I. No 628 18 Supply and fixing of 32 MM thick flush door commercial quality to 1.S. 2202 part 1st (1983) 18 including fixing of wooden cleats and stoppers, hinges, bolts, locks, handles, springs fittings with screws etc. (SI.no.4701) 19 M.S. Iron work in heavey size and section such as channal, truss racks, Gate, Door, Window etc i/e all meaterial, labour and T&P etc comp. as per SI. No. 503 (Item Rate As Per PWD SOR MORADABAD CIRCLE) 20 Providing and fixing of water closet pattern indian w.c. pan 580x440 mm 100 mm sand cast iron P & S trap 10 ltr low level white p.v.c. flushing cistern i/c all etc. comp.as per SI. NO. Chapter-22(B) 17.1.1 21 Providing and fixing of 20 mm dia normal bore G.I. Pipe of B class i/call etc. complete as per SI. No. 18.11.2 chapter no 22 22 Providing and fixing of 15 mm dia normal bore G.I. Pipe of B class i/call etc. complete as per SI. No. 18.11.1 chapter no 22 23 Providing and fixing of 15 mm dia normal bore C.P. Brass big cock of app. Quality i/calletc. Asper SI. No. 18.49.1 chapter no. 22 24 Providing and fixing of white vetreous china wash basin including making all connections but excluding the cost of fitting SI. No. 17.25.2 chapter no. 22 25 Providing and fixing of 100 mm dia P.V.C. Pipe 6kg/sqm pressure down pipe and under floor i/e all etc. comp. as per SI. No. 730 (a) chapter no 19 26 Providing and fixing of white vetreous china flat back of wall corner type lipped front urinal basin of 430x260x350 or 340x410x265 mm size i/call etc. complete as per SI. No. 17.4.1 chapter no. 22. 27 P/Fixing 10 ltr P.V.C.controlled flush, low level cistern made of vitreous china with all fitting complete. As per S.I. No. 17.19.1 28 Providing and fixing of 15 mm dia normal bore C.P. Brass big cock of app. Quality i/calletc. As per SI. No. 18.49.1 chapter no. 22 29 Providing and fixing of 15 mm dia normal bore C.P. brass long body of app. Quality i/calletc. Asper SI. No. 18.51.1 chapter no. 22 30 Providing and fixing of 15 mm dia normal bore C.P. brass stop cock(concealed) of app. Quality i/calletc. As per SI. No. 18.52.1 chapter no. 22 31 Providing and fixing of 15 mm dia normal bore C.P. Brass angle valve of app. Quality i/calletc. Asper SI. No. 18.53.1 chapter no. 22 32 Providing and fixing 32 mm dia P.V.C. waste pipe for sink or wash basin i/c P.V.C. waste fitting complete as per S.I No. 17.28.1.1 Ch No. 22 33 Providing and fixing of 600X450 mm.beveled edge Mirror of superior glass complete with 6 mm.thick hard boad ground fixwd to wooden cleats with C.P. brass screw and washer complete in all respect (Chapter-22 17.31) 34 Providing and placing on terace (at all floor level) Polyethyiene water storage tank ISI: 12701 marked with cover andsuitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fitting and the base support (Chapter-22(B) 18.48) . Last date of submission for this tender is 2024-08-16. This is a Rough Finishing Tools tender in Bijnor, Uttar Pradesh