Rural Engineering Department

Rural Engineering Department has published Tender For Maintenance Work In Swam College Chhaprauli Baghpat - Demolishing R.C.C. work by mechanical means and stockpiling at designated locations and disposal of dismantled materials up to a lead of 1 kilometre, stacking serviceable and unserviceable material separately including cutting reinforcement bars..As per DSR 15.58 2 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.As per DSR15.7.1 In mud mortar 3 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.as per DSR 15.60 4 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) Complete al as perDSR 4.1.10 5 M-150 B/W in 1:4 Cement & C/Sand mix mortar in Super Structure including in all respect Complete all as perDSR 6.41 6 12mm thick plaster in 1:4 Cement & C/Sand mix mortar Complete all as perDSR 6.4.2 7 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shutteringin proportion1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size) DSR No 5.2.2 (Reinforced Cement Concrete) 8 Centering and shuttering including strutting, propping etc. and removal of form for :For Column beam and Slab as per DSR 5.9.3 9 M.s. or tor steel in plain such as RCC work i/c its cutting, bending & binding complete as SI.504 10 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer.Complete al Complete all as perDSR10.2 11 Grading roof for water proofing treatment withCement concrete 1:2:4 (1 cement : 2 coarse sand :4 graded stone aggregate 20mm nominal size) Complete all as perDSR 22.14.1 12 Distempring two coat with oil bound distemper of approved brands & manufacturer complete Complete all as perDSR 13.41.1 13 Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)Complete all as perDSR13.46.1 14 Painting or varnishing work in small areas or new woodwork with one coat (upto one square metre of ready mixed priming paint and one coat of approved Complete all as perDSR13.53 15 Supply and fixing of Kota Stonein floor completeall in 20mm thickComplete all as perDSR 11.26.1 16 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface I recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. As per DSR E&M Ser No1.10.2 Group B 17 Wiring forcircuit/submain wiringalongwithearthwire withthe following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 2.5 sq.mm + 1 X 2.5 sqmm earth wireAs per DSR E&M Ser No 1.14.2 18 Wiring forcircuit/submain wiringalongwithearthwire withthe following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 4. sq.mm + 1 X 4 sqmm earth wireAs per DSR E&M Ser No1.14.3 19 Supplyingandfixing two modulesteppedtypeelectronicfan regulatorontheexistingmodularplateswitchboxincluding connections but excluding modular plate etc. as required. As per DSR E&M Ser No 1.25 20 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3pin5/6Amodularsocketoutletand5/6Amodularswitch, connections etc. as required. As per DSR E&M Ser No 1.31 21 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch. connections etc. as required. As per DSR E&M Ser No 1.32 22 Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providingand fixing 25 A modular socketoutletand25 AmodularSPMCB, C curveincluding connections, paintingetc. as required.As per DSR E&M Ser No 1.57 23 Providing and fixing following capacityTP&N disconnecterfuse switch unit inside the existing panel board with ISi marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 63A TP&N As per DSR E&M Ser No2.1.2 24 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/lsolator) 8 Way , Double DoorAs per DSR E&M Ser No2.3.2 25 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, C curve,miniature circuit breaker suitable for inductive load of following poles in theexisting MCBDB complete withconnections, testing and commissioninQ etc. as required.Sigle pole & Neutral As per DSR E&M Ser No 2.10.2 26 S/F Information /sign board i/c all comp. . Last date of submission for this tender is 2024-12-02. This is a Building Work tender in meerut, Uttar Pradesh