Rural Engineering Department

Rural Engineering Department has published Tender For Construction Of Tin Shed Outside Bijauli Badi Mata Temple. - Site Clearance with clearing Jungel including uprooting of vegetation grass,bush wood trees and sapling of girth upto30 cm I/C all complete. 2 Earth work by mechinical / manual means in rough excavation, banking excavated earth in layers not exceeding 20cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up in embankments for roads, flood banks, marginal banks and guide banks or filling up ground depressions, lead upto 50 m and for all lift:D.S.R Code No-2.8.1 3 Sand Filling in foundation or Plinth I/C all complete with Local sandI/C all complete as Directed by engineer incharge. 4 P/L in position cement concrete of specified grade excluding the cost of Centering and shuttering all work upto plinth level 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from Natural sources:8 graded stone aggregate40 mm nominal sizederived from Natural sources .D.S.R Code No-4.1.8 5 Providing and laying in position specified grade of reinforcement cement concrete,excluding the cost of centering,shuttering,finishing and reinforcement of R.C.C 1:1.5:3 with cement coarse sand .column T beam slab as DSR NO-5.1.2 6 M.S (Tor steel or plain ) in plain work such as R.C.C or R.B work including cutting / bending for proper shape as necessary including supply of all steel & wastage ,bend ,hook & authorised overlapping shall be measured … complete item.dsr 5.222.1 7 M-150 brick work in 1:6Cement & C. Sand Mortar in below plinth beam…Complete Item. D.SR-6.1.2 8 12 mm cement plaster thick 1:4 cement and coarse sand fair side single and half brick wall including internal rounded angles chamfers and or rounded angles not exceeding 80 mm in grith and finished even and smooth. DSR No-13.4.1 9 Excavating supplying and Filling of Local earth(including Royality)by machanical transport upto lead of 5 km also includnig ramming and watering of the earth in layers not exceeding 20 cm in trenchs,plinth,sides of foundation etc 10 Providing and layingKota stone slab 20 mm thick base laid over and jointed with gray cement slury mixed with pigment…complete item. 11 Finishing walls with two coat ofPremium acrylicemulsion smooth exterior paint of best quality supply of all materials,labour and T&P . 12 Steelwork inbuilt up Tubular(round,square or ractangular hollow tubes etc)Trusses etc including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer includingweldingand bolted with with special shaped washers etc all complete.DSR-10.16.2 13 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.(0.63 mm thick sheet) 14 Providing and layingGranite stone on Plate form and jointed with gray cement slury mixed with pigment…complete item. 15 Centering and shuttering including strutting, propping etc and removal of form for foundation etc. 16 Cost of Foundation Bolt complete item. 17 S/F of 1200 mm Sweep Ceiling fan made with Double ball bearing complete . 18 S/F of 1x22 Watt LEDTube Light ..complete (Sch. Nos.. 1413) 19 S/F of 4x2.5 feet size granite stone at siteincluding writing etc complete in all respect . Last date of submission for this tender is 2025-09-06. This is a Shed Construction tender in Jhansi, Uttar Pradesh