Rural Engineering Department

Rural Engineering Department has published Construction Work Of Teen Shed Platform At Public Place Near Hanuman Temple In Jaravali Village Of Development Block Bar. - Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil as per SI.No. 2.8.1 2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-lll) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) As per SI no. 4.1.8 3 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone ) finished with floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. 40 mm thick floor 20 mm nominal size stone aggregate. As SI No. 11.3.1 4 RR/CR stone masonary work in 1:6 cement andC/sand in foundation in plinth including supply of all material labour T&P etc complete work.as per S.I. 7.6.1 5 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Upto Plinth Lvl as SI No-5.1.2 6 Steel reinforcement for R.C.C. work ready to use cut and bend rebars of approved make from factory/workshop to construction site including placing in position and binding all complete in Thermo-Mechanically Treated bars of grade Fe-500D or more. As per SI. No.- 5.22.1 7 12 mm thick cement plaster of mix 1:6 ( 1 cement & 6 course sand ) Outer Side as per IS 13.4.2 8 Steel works in built up tubular (round, square, rectengular hollow tubes etc) tresses etc. including cutting, hoisting, fixing in position and appling a primming of approved steel primer including welded and bolted with special shaped washer etc complete. as per SOR 10.16.1 9 SHEET ROOFING Providing corrugated G.S sheet roofing incluidingvertical/curved surface with polymer coated j & L hooks bolt & nut 8mm diameter with bitumin & GI limpet washer 0.8 mm thick as per S.O.R 12.1.2 10 Earth work in cutting/FillingI/c all required for proper completion of work asdirected by engineer in chargeI/c all complete 11 Earth work in cuttingin Moorum Mix (in Bundelkhand areas, requiring use of special T&P such as pick axes and sabbals etc.) excavation to be in the form of regular pits not exceeding 1/2 meter (20) in depth including ramming and dressing the surface to required, levels and slopes and also including 1.5 m. (5ft), lifts and 30 m. (100ft) lead. 12 Providing, laying, spreading and compacting stone aggregates of specific sizes of 22.4-53 mm to water bound macadam Grading 3 specification in pot holes & damaged edges of road. including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening to fill (Type B) up the interstices of coarse aggregate, watering and compacting to the required density as per TechnicalSpecification Clause 405. 13 Providing & Laying of 80mm interlocking concrete pavement laid in stone dust base & fill joints with fine sand.Joint filled after laveling & dressing base including supply of all material labour T&P etc. Required for proper completion of the work. S.I. No. New Item No. 3 Chap. No. 14 14 Sign board As ser Site . Last date of submission for this tender is 2024-12-28. This is a Shed Construction tender in Lalitpur, Uttar Pradesh