Purvanchal Vidyut Vitaran Nigam Limited

Purvanchal Vidyut Vitaran Nigam Limited has published Tender For Capacity Enhancement Of 11 / 0.4 Kv Sub-Station- 1 Supply Of Following Materials As Per Resspo / Puvvnl Norms At The Work Site. 2 Pcc Pole 805 Mtr Long 3 Top Channel Ms 125X65x2240 Mm Long 4 Ms Angle 75X75x6, 2080Mm.With Clampe & Boltand Nut ( Tf Base ) 5 Acsr Weasel Conductor 6 11 K.V. Disc Insulatort&Ctype 4500Kg. With Fitting 7 11 K.V. Pin Insulator With Pin 8 Lt Pvc Cable Al. 1X240 Sq.Mm 9 Lt Pvc Cable Al. 1X400 Sq.Mm 10 Lt Pvc Cable Al. 3.5X70 Sq.Mm 11 Lt Pvc Cable Al. 3.5X150 Sq.Mm 12 Lt Xlpe Cable Al. 3.5X70 Sq.Mm. 13 Stay Complete 14 Earthing Complete 15 25 Kva Three Phase T / F, 11 / 0.4 Kv 16 63 Kva Three Phase T / F, 11 / 0.4 Kv 17 100 Kva Three Phase T / F, 11 / 0.4 Kv 18 250 Kva Three Phase T / F, 11 / 0.4 Kv 19 400 Kva Three Phase T / F, 11 / 0.4 Kv 20 Stay Rod Set Complete 21 Stay Wire 7 / 10 Swg 22 Supply Of De-Centralized Materials ( Provided By Contactor ) 23 F- Bracket / Clamp With Nut & Bolt 24 Al. Lug 250 Sq.Mm 25 Al. Crimping Lug 240 Sq.Mm 26 Al. Crimping Lug 220 Sq.Mm 27 Al. Crimpinglug 95 Sq.Mm 28 Coper L.Piece 50X225x10 Sq.Mm 29 Ms Nut & Bolt 30 Stay Clamp With Nut Bolt 31 Construction Of Plinth 32 Work Of Following Materials As Per Resspo / Puvvnl Norms At The Work Site. 33 Shifting, Loading, Carriage ( Sonbhadra ) & Erection Ofdouble Pole Structure On 8.5 Mtr. Pcc Pole By Erecting Single Pole Near Old Installed 10 Kva Transformer Including All Works Of Evocation Of Pit, Pole Erection, Grouting In The Ratio 1:4:8 ( Cement, Sand, 40 Mm Brick Ballast ) , Back Filling Of Earth , Proper Ramming & Fitting Of All Accessories For Single Circuit ( Ms Angle 75X75x6, 2080Mm.With Clampe & Boltand Nut ( Tf Base ) , Top Channel With Clamps, Disc Insulator T & C Type, Disc Fitting T & C Type, Composite Polymer Pin, Insulator, P.G. Clamp, E Bracket, Danger Board With Clamp, Poleno. Painting, Barbed Wireearthing, Grouting Of Stay Rod Including All Work As Per Norms Etc. Complete ) . 34 Shifting, Loading, Carriage & Laying, Spreading, Lifting And Final Sagging Of 3 Phases 3 Wire 11 Kv Line And 3 Phase 4 Wire 0.440 Kv Line Of Acsr Weasal Conductor In Accordance With Profile And Sag Chart Including Binding, Jumpering And Fixing Of P.G. Clamp As Per Requirement In 03 Nos. / 04 Nos. Conductor In Parallel. 35 To Connect The Overhead Line To The TransformerS All Phases By Lugging Both The Ends Of The Lt Pvc Cable Al. 1X240 Sq.Mm With The Crimping Lugs. 36 To Connect The Overhead Line To The TransformerS All Phases By Lugging Both The Ends Of The Lt Pvc Cable Al. 1X400 Sq.Mm With The Crimping Lugs. 37 To Connect The Overhead Line To The TransformerS All Phases By Lugging Both The Ends Of The Lt Pvc Cable Al. 3.5X70 Sq.Mm With The Crimping Lugs. 38 To Connect The Overhead Line To The TransformerS All Phases By Lugging Both The Ends Of The Lt Pvc Cable Al. 3.5X150 Sq.Mm With The Crimping Lugs. 39 To Connect The Overhead Line To The TransformerS All Phases By Lugging Both The Ends Of The Lt Xlpe Cable Al. 3.5X70 Sq.Mm With The Crimping Lugs. 40 Grouting Ofstay Rods ( 16 X 1800 ) Mm Including All Work Of Excavation, Cement Concrete In Size ( 0.60 X 0.60 X 0.30 ) M In Ratio 1:4:8 Cement, Sand, 40Mm Brick Ballast ) As Per Drg Including Back Filling, Proper Ramming Etc. Fixing Tightening & Nozzling Of Stay Wire With Stay Rod With The Poles Of Required Tension As Per Drawing. 41 Shifting, Loading, Carriage & Erection To Make Proper Earthingneutral And Body Oftransformers And Poles With Help Of Gi Wire. 42 Shifting, Loading, Carriage Of Materials & Making New Plinth 43 Shifting, Loading, Carriage Of Materials & Making Of Double Polecarriage And Resetting On New Double Pole Including Complete Work For Establishmentof25kva Three Phase T / F, 11 / 0.4 Kv 44 Shifting, Loading, Carriage Of Materials &Resetting On Existingdouble Pole Including Complete Work For Establishmentof63 Kva Three Phase T / F, 11 / 0.4 Kv 45 Sshifting, Loading, Carriage Of Materials &Resetting On Existingdouble Pole Including Complete Work For Establishmentof 100 Kva Three Phase T / F, 11 / 0.4 Kv 46 Sshifting, Loading, Carriage Of Materials &Resetting On Existingdouble Pole / Plinth Including Complete Work For Establishmentof 250 Kva Three Phase T / F, 11 / 0.4 Kv 47 Shifting, Loading, Carriage Of Materials & Making Of Plinth, Carriage And Resetting On New Plinth Including Complete Work For Establishmentof400 Kva T / F . 48 Taking Off The Old 10 Kva Transformer Currently In Use From The Single Pole / Double Pole / Plinth And Receive Back It To The Esc Sonbhadra. 49 Taking Off The Old 16 Kva Transformer Currently In Use From The Single Pole / Double Pole / Plinth And Receive Back It To The Esc Sonbhadra. 50 Taking Off The Old 25 Kva Transformer Currently In Use From The Single Pole / Double Pole / Plinth And Receive Back It To The Esc Sonbhadra. 51 Taking Off The Old 63 Kva Transformer Currently In Use From The Single Pole / Double Pole / Plinth And Receive Back It To The Esc Sonbhadra. 52 Taking Off The Old 100 Kva Transformer Currently In Use From The Single Pole / Double Pole / Plinth And Receive Back It To The Esc Sonbhadra. 53 Taking Off The Old 250 Kva Transformer Currently In Use From The Single Pole / Double Pole / Plinth And Receive Back It To The Esc Sonbhadra. 54 Fixing Of Coper L.Piece 50X225x10 Sq.Mm. Last date of submission for this tender is 2023-10-06. This is a Civil Work tender in Sonbhadra, Uttar Pradesh