Public Works Department

Public Works Department has published Tender For Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes Of 45-63 Mm To Water Bound Macadam Grading 2 Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screening/Binding Materials To Fill Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 2 As Per Technical Specification Clause 405. , Wbm Grading 3 Providing, Laying, Spreading And Compacting Stone Aggregates Of Specific Sizes To Water Bound Macadam Specification Including Spreading In Uniform Thickness, Hand Packing, Rolling With Smooth Wheel Roller 80-100 Kn In Stages To Proper Grade And Camber, Applying And Brooming, Stone Screening To Fill-Up The Interstices Of Coarse Aggregate, Watering And Compacting To The Required Density Grading 3 As Per Technical Specification Clause 405. (A) By Manual Means , Providing And Applying Primer Coat With Bitumen Emulsion (Ss-1) On Prepared Surface Of Granular Base Including Cleaning Of Road Surface And Spraying Primer At The Rate Of 0.70 Kg/Sqm Using Mechanical Means As Per Technical Specification Clause 502 (Rate Including Emulssion Ss-1) , Tack Coat (I) Providing And Applying Tack Coat With Bitumen Vg-10 Using Bitumen Distributor At The Rate Of 0.35 Kg Per Sqm On The Prepared Bituminous Surface Cleaned With Hydraulic Broom As Per Technical Specification Clause 503.Clause 503. Mord (Rate Including Bitumen Vg-10) , 20Mm Thick Open-Graded Premix Carpet Using Bituminous (Penetration Grade/Modified Bitumen) Binder Providing, Laying And Rolling Of Open-Graded Premix Carpet Of 20 Mm Thickness Composed Of 13.2 Mm To 5.6 Mm Aggregates Either Using Penetration Grade Bitumen Or Emulsion To Required Line, Grade And Level To Serve As Wearing Course On A Previously Prepared Base, Including Mixing In A Suitable Plant, Laying And Rolling With A Three Wheel 80-100 Kn Static Roller Capacity, Finished To Required Level And Grades To Be Followed By Seal Coat Of Either Type C As Per Technical Specification Clause 508. (Rate Including Bitumen Vg-10) Case - Ii By Mechanical Means(Hmp 30/40) (I) Bitumen Vg-10 , Seal Coat Providing And Laying Seal Coat Sealing The Voids In A Bituminous Surface Laid To The Specified Levels, Grade And Cross Fall Using Type C As Per Technical Specification Clause 510 Case - Iii : Type C (Rate Including Bitumen Vg-10) By Mechanical Means(Hmp 30/40) (I) Bitumen Vg-10 , Construction Of Subgrade And Earthen Shoulders Construction Of Subgrade And Earthen Shoulders With Approved Material Obtained From Borrow Pits With All Lifts And Leads, Transporting To Site, Spreading, Grading To Required Slope And Compacted To Meet Requirement Of Table 300.2 With Lead Upto 1000 M As Per Technical Specification Clause 303.1. , Excavation For Roadwork In Soil With Hydraulic Excavator Of 0.9 Cum Bucket Capacity Including Cutting And Loading In Tippers, Trimming Bottom And Side Slopes, In Accordance With Requirements Of Lines, Grades And Cross-Sections, And Transporting To The Embankment Location With A Lift Upto 1.5 M And Lead Upto 1000 M As Per Technical Specification Clause 302.3 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 I.( Plain Cement Concrete Grade M 10 (I) Nominal Mix 1:3:6) , Brick Masonry Work In Cement Mortar In Foundation Complete Excluding Pointing And Plastering As Per Drawing And Technical Specifications Clauses 600, 1202 &Amp; 1203 Ii. (Brick Masonry In 1:4 Cement Mortar) , Plastering With Cement Mortar (1:4), 15 Mm Thick On Brickwork In Substructure As Per Technical Specification Clauses 613.4 & 1204 , Providing Concrete For Plain/Reinforced Concrete In Open Foundations Complete As Per Drawings And Technical Specifications Clause 802, 803, 1202 & 1203 Iv. Reinforced Cement Concrete Grade M 20 , Supplying, Fitting And Placing Mild Steel Reinforcement Complete In Sub-Structure As Per Drawing And Technical Specification Clause No. 1100.. Last date of submission for this tender is 2026-03-07. This is a Construction Material tender in Kanpur, Uttar Pradesh