Public Works Department

Public Works Department has published Road Safety Work At Bilgram Unnao Prayagraj Road (Sh-38) Km- 170 To 192 (Length- 23.00 Km And Width- 7.00 M) - P/L of hot applied thermo plastic compound 2.5 mm thick including reflecto rising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass breads as per IRC 35.The finished surface to be level uniform & free from streaks and hole. (Excluding cost of GST) 2 6 m span over head cantilever structure with 300dia MS one vertical post:-Supply, fixing & eraction of built up cantilever structure 6m span comprising of one verical posts of 6.00M height made up of 300mm NB heavy class MS pipe as vertical member welded with 10mm MS plate at top & 12mm MS plate at bottom. The horizontal Truss shall comprise of 50mm dia heavy class M.S. pipe and 40mm dia heavy MS pipe as bracing & 10mm MS plate at bottom for fixing to vertical post as per structure design & drawing with one of steel primer and two coats of synthetic enamel plant. The work includes construction of RCC Foundation of size 90x90M of required depth as per site condition for built up structure including Earth work in excavation 100mm thick lean concrete in 1:4:8 cement coarse sand and 40mm gauge stone ballast. RCC withand 1:2:4 cement coarse sand and 20mm stone grit including supply and fixing of 25mm dia Foundation Bolts 600mm long as per provision of structure design including cost of reinforcement & shuttering. The lateral vertical clearance and complete as per clause of MORTH Specification section 800 and IRC 672010. (Excluding cost of GST) 3 Providing & fixing of retro reflective signs with a corrosoin resistant 4 mm thick aluminium composite panel face to be fully covered with High Intensity prismatic sheeting type IV as per IRC-67:2010 retro reflective sheeting with MS angle frame of 3583. (Excluding cost of GST) 4 Retro-reflectorised Traffic sign as per IRC-67-2020providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC: 67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45 cm x 45 cm 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance,(A) Stop (90 cm high octagon) (MoRTH-801, Si. No.-18) (Excluding cost of GST) 5 Retro-reflectorised Traffic sign as per IRC-67-2020providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC: 67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45 cm x 45 cm 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance,(B) Sheveron sign board (Excluding cost of GST) 6 Retro-reflectorised Traffic sign as per IRC-67-2020providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC: 67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45 cm x 45 cm 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance,(C) Speed/speed limit signs at Curves and other places (60 cm Circular with diffinitation plate) (MoRTH-801, Si. No.-18) (Excluding cost of GST) 7 Retro-reflectorised Traffic sign as per IRC-67-2020providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC: 67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45 cm x 45 cm 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance,(D) Object Hazards sign at Culverts (30x90 cm (Left/Right) Object Hazard) (MoRTH-801, Si. No.-18) (Excluding cost of GST) 8 Retro-reflectorised Traffic sign as per IRC-67-2020providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC: 67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45 cm x 45 cm 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance,(E) Reflective sign board of abadi name/crossing /junction (60 mm x 45 mm rectangular with diffinitation plate (20cm x 60xm)) (MoRTH-801, Si. No.-18) (Excluding cost of GST) 9 Retro-reflectorised Traffic sign as per IRC-67-2020providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC: 67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45 cm x 45 cm 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance,(F) Reflective Raised Pavement Markers (Cat Eye/ Road Stud) with Shank (SOR Chap.26 SI. No.-5) (Excluding cost of GST) 10 Retro-reflectorised Traffic sign as per IRC-67-2020providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC: 67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of property designed foundation with M-15 grade cement concrete 45 cm x 45 cm 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance,(G) Tree PlateSupply & fixing of Retro reflective Tree Plate having size 15cm x 15xm, consisting Type XI Retro reflective Sheeting fixed Over 1.50 mm thick aluminium sheet including labour, Material, T&P etc for proper completion of the work. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charge. (SOR,si. No-21)) (Excluding cost of GST) . Last date of submission for this tender is 2024-11-26. This is a Safety Consultancy Service tender in raebareli, Uttar Pradesh