Public Works Department

Public Works Department has published Tender For Repair And Painting Work Of Inspection Building Dhabri Repair And Painting Work Of Inspection Building Dhabri. - Dismantling existing plaster including disposal of refuse as directed by Engineer-In-Charge within a distance of 60 meters. Ch.-17, Item No-706 2 Scrapping old white or colour wash including disposal of refuse as directed by Engineer-In-charge within a distance of 60 meters (200 feet) Ch.-17, Item No-708 3 12mm Cement plaster with cement mortar in proportion of 1:4 cement & coarse sand ofsingle coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. Ch.-13 (13.4) 4 Distempering (2 coat) with oil bound distemper of approved brand and manufacture and of required shade on undercoated wall surface to give an even shade over & including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian, paints after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even with plaster of approved synthetic material and sand papered smooth including cost of all materials. Ch.-15 SL-(649+650) 5 Finishing walls with Putty approved brand and manufacture and of required shade on undacorated wall surface to give even shade over including curing and cost of all material, labour, T&P etc. required for proper completion of work. 6 Painting 1st coat over priming coat (but excluding cost of priming coat) on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 Sq.M. in area with superior synthetic enamel such as Luxol 3, Hi gloss Apcolite, Superlac, Dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work. Extra over item 2(a) and 2(b) above but for every coat on previously painted old surface Ch.-15 SL-643. (2 Coat) 7 Providing and laying vitrified floor tiles in different size (thickness to be specified by the manufactorer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make in all colour and shades, laid on 20mm thick cement mortat 1:4 (1cement : 4coarse sand) including grouting the joints with white cement and matching pigments etc. complete size of tile 600X600mm Ch.-14 (11.27A) 8 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. Ch.-14 (11.37) 9 Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone of size 20mm nominal size) laid in one layer finished with floating coat of neat cement (40mm thick floor) Ch.-14 (665) 10 Finishing walls with 2 coat of waterproof cement paint of approved quality on previously old treated surface with this paint to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powder material including curing and cost of all materials. Ch.-15 (662x2) 11 Supply and fixing of flush doors, commercial quality conforming of I.S. 2202 part-1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screws to be supplied departmentally (A) 32mm thick Ch.-9 (9.21) 12 Class-150 (Non Modular) brick work in 1:4 cement and Coarse sandmortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.Ch.-6 (2.6.1) 13 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. Ch-24 (Item No-1) 14 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931. 15 mm nominal bore (ch-23-33) 15 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore (ch-23-36) 16 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm nominal bore 17 Supply and hoisting of Sintex or equivalent high density polyethylene seamless of piece moulded tanks and placing the same in proper position including all taxes, labour and T&P etc. for proper completion of work. Tank should be ISI marked, Sintex or equivalent. Ch.19 (2) . Last date of submission for this tender is 2025-10-09. This is a Painting tender in Firozabad, Uttar Pradesh