Public Works Department

Public Works Department has published Tender For Road Safety Works On Various Routes In Bamour Block Under The Section - Providing and laying of hot thermoplastic compound 2.5 mm thick including reflect rising glass beads @ 250 gms per sqm area thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC-35 the finished surface to be level uniform and free sleek and holes, Zebra Line. 2 Providing and laying of hot thermoplastic compound 5mm thick including reflect rising glass beads @ 250gms per sqm area thickness of 5 mm is exclusive of surface applied glass beads as per IRC-35 the finished surface to be level uniform and free sleek and holes. (Repeated bars in Abadi Portion) 3 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing .(HAZARD MARKER (LEFT & Right) 4 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing .(MAXIMUM SPEED LIMIT) 5 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing.(SINGLE CHEVRON NORMAL) 6 Supply and fixing of every dennision/3M brand RPM series 290 (CAT EYE) (RED/YELLOW COLOUR) made of polycarbonate with electronic welded prismatic retro reflective lens on both side for maximum retro reflection in wet and dry condition with bitumen adhesive BT 69.(as per lucknow SOR) 7 Road Delinator Providing and fixing of standard metal Delineator as per IRC 79 -2019 consisting of minimum Retro reflactive unit exposed area of 330 sqcm in white colour,full cube corner micro prismatic non metallic retroreflective sheeting on each side conforming with IRC 67-2012 and meeting the cofficient of retro reflection value as per ASTM D 4956 type XI table specification ,The Delineator shallbe painted with powder coat of minimum 40 micron thickness, on top of which Retro reflective sheeting shall be pasted on both side.The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground ,width not less than 100mm and shall extend not more than 300mm below the ground while being installed .The front and back face of the Delineators should be curved with radius of not more than 200mm & width delta angle (or central angle of curve) laying between 20 Degree & 30Degree ,to increase the visibility of the Delineator for vehicals moving in continous curves. The Delineator shall have grooves acroos the length to make the Reflective sheets bundel -proof . The Retroreflactive sheeting shall be tested for 3 year weathering test in indian condition as per IRC 67-2012 & proof of the same in form of Government report shall be uploded which Quoting tender. If some how tender pre qualification condition do not ask for government report than the report shall be submitted to Engineer -in -charge before finilization of bill .The deleneator is ment for application on gaps in median ,traffic island ,dangerous bends ,round about ,narrow brides etc.Or as desired by site Engineer. 8 Tree Plate supplying & fixing tree plate having size 15 cm x 15 cm consisting type -XI sheeting over 1.5 mm thick aluminium sheeting including labour,material T&P etc all completeof the work . Last date of submission for this tender is 2025-02-11. This is a Safety Consultancy Service tender in jhansi, Uttar Pradesh