Nagar Panchayat

Nagar Panchayat has published Tender For Renovation And Improvement Work By Hotmix From Zulfikars House To Ali Hasans Enclosure - Scraping old painted surface incl. disposal of all scrapped materials ….etc complete. SI No. 772 2 Providing, laying, spreading and compacting graded stone aggregate in layers Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.Ref. to MoRTH Spec.406 3 Providing and applying primer coat with bitumen emulsion (SS-2) on prepared surface of granular base including, cleaning of road surface and spraying primer at rate of 0.75 Kg/Sqm using mechanical means as per Technical Specification Clause 5.1-502 4 Providing and applying tack coat with bitumen (VG-30) using Bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom. as per Technical Specification Clause 5.2 503 5 Providing and laying Dense Graded Bituminous Macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 Percent by weight of total mix and filler, transporting the hot mix to work site, laying with ahydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. 6 Providing and applying tack coat with Bitumen(VG-30)using emulsion distributer at the rate of 0.20 kg/sqm on the preparedtreatedbitumen surface and cleaned with Hydraulic broom as per Technical Specification Clause 5.2-503 (iii) 7 Providing and laying Bituminous Concrete with hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30@ 5.4% of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects 8 Painting lines, dashes, arrows, etc. on roads withhot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads in two coatson new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702 9 Supply and Fixing of Pavement Maker (Cat Eye) Type X- ASTMD-4956-04 Avery denision /3-M (USA MAKE) consisting of ASA Plastic housing fitted with tightly adherent ploting compound. The housingshall contain prismatic to Glass covered prismatic reflecting face to reflect incident light 10 Brick work in (1:4) ratio cement & coarse sand mortar i/c labour materials T&P…..etc complete.SCH.P.W.D. 305(b) 11 12mm cement plaster (1:3) ratio cement & fine sand mortar…...etc complete. As per SOR 582. 12 R.C.C. Work (1:2:4) ratio cement, coarse sand & 20mm guage stone grite i/c labour materials T&P…...etc complete. . Last date of submission for this tender is 2025-08-30. This is a Construction Material tender in Tanda, Uttar Pradesh