Nagar Palika Parishad

Nagar Palika Parishad has published Tender For Work Number-6, Wall, Gate And Other Repair Work In E.O. Residence. - Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-incharge. DSR 2021 SI. No. 2.6.1 2 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)DSR 2023 SI. No. 4.1.8 3 Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 2021 SI. No- 6.1.1 4 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fr 5 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:4 (1 cement : 4 coarse sand). DSR 2023 SI. No. 6.4.1 6 R.c.c work with cement approved coarse sand and 2cm (3/4) gauge approved stone ballast in the proportion 1:1.5:3 in R.cc Slab supply of reinforcement and its bending butinculding its fixing and binding the same with 24 bwgi binding wire and including necessary oentering and shuttering etc. And also including supply of all materials labor and tools and plants etc. Required for proper completion of the work. Strength of the concrete shall not be less than M-150.( S.I. No.-284) 7 Mild steel or iron in plain work such as reinforced concrete or reinforced brick work (when not included in and an overall rates) brought for proper completion of the work and including supply of steel, its wastage bend hooks and authorized over lapping shall be measured up to floor two level. (b) 10mm to 12mm tor.( S.I. No. 504) 8 12 mm cement plaster finished with a floating coat of neat cement of mix.1:4 (1 cement: 4 coarse sand). DSR 2023 SI. No- 13.4.1 9 Mild steel of iron in heavy size such as trusses built up gates record reck, roof work gates etc. brought to required form including drilling holes revitting are welding where neccesary, and also including supply of steel bolts , nuts wastage etc. and there fixing required for completion of the work. (S.I. No.503) 10 Supply & fixing of flush doors, commercial quality conforming of I.S. 2202 part 1 (1983) including fixing of wooden cleats and stoppers and including fixing and adjustment of hinges, bolts, locks, handles, springs, fitting with necessary screws to be supplies deparmentally.(a) 32mm thick. {Chapter No.09 S.I.No. 470(a)} 11 Fixingventilater etc. all complete. (DSR No. 9.6.1) 12 Fixing of door 13 Finishing walls with water proofing cement paint of required shade. New work (Two or more coats applied @ 3.84 kg/10 sqm). DSR. 2023 SI. No- 13.44.1 14 Supply and fixing 6mm (1/4) thick chine white glazed tiles in flooring or dadolaid with 1:3 cement and approved coarse sand mortar and approved coarse sand mortar finished with whitecement jointed and polishing complete including supply of all materials, labor for porper completion of the work( S.I. No. 628) 15 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlleddevice (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests 16 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:17.7.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 17 Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 18 C.P. brass towel rail 750x20mm together with pair of C.P. brass brackets to fit the towel rail. 19 Brass stop cock heavy quality (Gem Mikado/Excess’s William of qev.) (Chapter-21 Sr. No. 46) 20 P.V.C. pipe 75mm dia ISI make (working presure 6kg/sqcm) 21 P.V.C. pipe 110mm dia ISI make (working presure 6kg/sqcm) 22 Providing and Laying Vitrified Tiles 500x500mm Size(thickness 10mm), with water absorption less than 0.08% and conforming to IS:15622, of approved brand manufacture, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints etc. all complete. (Chapter No.14 Sr.No.13 New Item) 23 Electrification work 24 Solid form uPVC sheet 25 Supply & Fixing of HPL Sheet 26 Cement Concrete with 2 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 includng supply of all materials, labour, Tools& plants etc. required for proper completion of the work. (DSR4.1.3) 27 GST . Last date of submission for this tender is 2025-03-18. This is a Construction Material tender in baghpat, Uttar Pradesh