Nagar Palika Parishad

Nagar Palika Parishad has published Tender for civil work of 05 TPD wet waste processing pit composting under Swachh Bharat Mission Nagariya in Nagar Palika Parishad Chunar Mirzapur, Surface Dressing of Groung Including removing vegetation and in equallties not exceeding 15 cm deep and disposal of rubbish lead up 50 m and lift up to 1.5 m All kinds of Soil. 2 Earth work in surface excuationnot exceeding 30 Cm in depth but exceeding 1.5M in wudth as well as 10Sqm in plan including getting out and disposal of excavated earth up to 50 m and Lift up to 1.5 m as directed by Engineer-in-Charge 2.1.1 All kinds of soll. 3 Excavating Supplying and filling of local earth (including royalty) by mechanical transport up to lead of 5KM also including ramming and watering of the earth in layers not exceeding of the earth in layers notexceeding 20Cm in trenches, plinth, sides of foundation etc. complete. 4 Providing & Laying of C.c. in 1:6:12 with C/S and 40 Mm G.S.B. in Foundation of Floor I/C All labour materials and T&P Etc. 5 R.C.C. work in Column 1:2:4 with Cement Coarse sand 20MM gaug stone grit I/C all complete 6 M150 Brickwork in 1:6 C/S Mortar in Sub structure I/C All Labour & T&P Etc 7 12 MM thik internal Plastar in 1:3 with C/S mortar in wall IC all materialsLabour & T&P Etc S.I-586 8 Providing & Laying Steelbars including Cutting binding Placing and complete in all respect 9 M.S. iron Door and Windows with ms angle and ms steel i/C all complete as directed by Engineer in charge as chapter 10S.I. no 503 10 Mild steel or iron work in heavy size such as trusses build up gates record racks roof work gates etc wrought to required from including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work 11 Mild steel or iron work of Small sizeand Section such as Holding down Bolts Hold fast tie rods grating etc(when not included in an overall rates) wroughtto required shape as necessary for banding etc including cost of bolts, nuts if required welding for completion of work but. trusses build up gates record racks roof work gates etc wrought to required from including drilling holes riveting or welding where necessary and their fixing required for proper completion of the work 12 Providing and fixing precoated gaivanised Iron steel (Sixe shape and pitch of corrugation as approved by Engineer-in-Charge) 0.50 MM (+.0.05%) total Coated thickness with zinc coating 120 grams per Sqm as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 Microns Sheet should have protective guard film of 25 mocrons minimum to avobe scratches during transpotian and should be supplied in single length upto 12 metre or as desired by Engineer-in -charge the sheet shall be fixed using self drlling, 13 providing and laying rectified Glazed Ceramlc floor tiles of size 300X300 mm of More(thickness to be specified by the manufacturer) of1st quality conforming to IS:15622 of approved make in colours white lvory Grey Fume Red Brown laid on 20 mm thick cement mortar 1:4 ( 1 Cement : 4 Coarse Sand) Joininting with slurry white Cement and matching pigments etc plete 14 providing and laying rectified Glazed Ceramlc floor tiles of size 300X300 mm of More(thickness to be specified by the manufacturer) of1st quality conforming to IS:15622 of approved make in colours white lvory Grey Fume Red Brown laid on 20 mm thick cement mortar 1:4 ( 1 Cement : 4 Coarse Sand) Joininting with slurry white Cement and matching pigments etc plete 15 Sistempring (First Coat) with oil buond Distemper of approved brabd and manufacture and of requierd shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N Shalimar, Asian, paints after thoroughly brusing the surface free from mortar dropping and other foreign matter and also including prepairing the surface even with Plastar of Paris ofr approved synthetic mamaterial and sand papered Smooth including cost of all materials 16 Painting of wood and ironwork includding sand prepring rubbing and cleaing as requierd for proper completed of work (two Coat) 17 Painting of Varnishing on Iron work in small arts or new wood work with one coat of ready or new wood work one coat of ready mixed priming paints & one coat of approved supperior quality ready mixed paint of clear used should confarm to the I.S.I N0. 103 18 Providingand Apply Putty of 2mm thicknessover plastered surface to smooth complete 19 Supply & fixing 32 Mm thick flush Door all Complete Fitting 20 Supply and FixingAluminium flush Door all Complete fitting Bathroom and Lattrin 32 Mm thick flush Door all complete Fitting 21 Supplu and fixing 32 MM thick Flush door ply wood with handil fitting all complete. 22 Wiring Point for light with 1.5 SQ. Mm PVC Insterd single core Aluminium conductor cable in haVY Pipe on surface 8 swg Gi earth wire switch & Holder 3 MM thick 23 Wiring Point for fan Fresh air fan (Light dutyexhaust fan) with 1.5 Sqm Pvc insulated singal coreAluminium conductor cable in have 3 mm laminatedcompel 24 Wiring Point Plugwith 1.5 Sqm Pvc insulated singal coreAluminium conductor cable in have 3 mm laminatedcompel 25 S/F of 18 WHewells Mark All Fitting Complete MR 26 S/F of LED 12 W Hewells Mark All Fitting Complete MR 27 Septic tank appropriate for 2 Year Cleaning interval for 50 User. 28 S/F of low density polyhene seamless oneplace moulded tank and placing the same in Proper position including all 29 Providing and fixing GI/PVC pipe all Fitting 30 Providing and fixing sanitary pipe all Fitting 31 Providing and fixing WC pan medaln type with cast iron p and s trap all complete with auutomacitc Flushing 32 Supply and Fixing 25mm PVC Pipe in Posting all complete 33 Supply and Fixing 25mm PVC Pipe in Posting all complete 34 Supply and Fixing 30 mm Dla stocket 35 200 MM Dia Drlling and 350 MM Dia running from Gruond Level to 50m beluw Gruond lavle in alluvial soll up to sand strate 36 Supply and lowering of 150 MM dia PVC Plain casing pipe 37 Supply and fixing of 150 mm dia End Cap 38 Supply and fixing of 150 mm dia Top Cap 39 Supply and fixing of 150 mm dia Centerlizer 40 P/F flat back 550x400 Hand wash basin ofof white glazedrethen ware ISI Marked Suply of all materials Labours Mark 41 P/F flat back 465 Mm x 355 mm X265 mm Sixe lipped from urinal basin of white glazed of all materials Labours Mark 42 P/F Polyvinyl Chlorled (CPVC) Pipe 20MM Dia 43 P/F Polyvinyl Chlorled (CPVC) Pipe 15MM Dia 44 P/F Bib brass Bib Clock 400Gms I/C all 45 Making Water connection of gi Pipe line With Gi main as in SI 210 46 PVC Low lavle Clstcrns 10 Ltr Capasity with all internal Fitting Of PVC Etc 47 hand pump with submersable 48 18%GST . Last date of submission for this tender is 2024-09-17. This is a Clocks tender in Chunar, Uttar Pradesh