Madhyanchal Vidut Vitran Nigam Limited

Madhyanchal Vidut Vitran Nigam Limited has published Tender For DT Increasing and additional DT Work Under BP 2025-26 Under EDSD Third under EDD,Barabanki - Safe loading Carriage including unloading and proper stacking of following materials from central store Barabanki Store to site of work. 2 PCC POLE 8.5 MTR LONG 3 S/S Base Angle 4 T/F11/0.4KV, 25 KVA 5 T/F11/0.4KV, 63 KVA 6 T/F11/0.4KV, 100 KVA 7 T/F11/0.4KV, 250 KVA 8 T/F11/0.4KV, 400 KVA 9 MS Top Channel 10 T-off Channel 11 LT ABC (3*120+1*95+1*16) SQMM 12 LT ABC (3*95+1*70+1*16) SQMM 13 LT ABC (3*50+1*35+1*16) SQMM 14 11 KV Composite Polymer Pin Insulater with N&B 15 11 KV Composite Polymer Disc Insulator With Fitting 16 11 KV V-type Cross Arm 17 Earthing Rod 18 ACSR Weasel CONDUCTOR 19 GI wire 8 SWG 20 Dragging of pole from Store to site 21 Grouting Of STP/PCC Pole 22 Installation of Mounting of Following capacityof Transformer including its connection between 11 KV and LT Line mountingprovinding Crimping type Aluminium lugs of required size.( All the material except transformer will be arranged by the contractor) 23 Mounting of 25 KVA Tranformer 24 Mounting of 63 KVA Tranformer 25 Mounting of 100 KVA Tranformer 26 Mounting of 250 KVA Tranformer 27 Mounting of 400 KVA Tranformer 28 Stringing and sagging of 11 KV line with ACSR WeaselConductor including nuzzling binding and jumpering (Weasel conductor will be provided by the department) 29 Errectionof Substation type double pole with PCC including mounting of Top Channal Dropper Channel, base angle with clamps with nut & bolt 33/11 KV line including grouting of support and plinthing 300 mm above ground level, fitting of 33/11 KV pin & Pin insulator. 1/6 of total lenght of poles will remain under the ground and planted on stone pad of Size 300x300x75 MM. 30 Erectionof singlePCCPole for Stringing and sagging of conductor 1/6 of total length of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 31 Stringing and Sagging of LT ABC Cable(3*120+1*95+1*16) & (3*95+1*70+1*16) and (3*50+1*35+1*16) SQMM (LT Cable will be provided by the department) 32 Earthing of Pole with MS Earthing Rod. 33 Provinding & Fixing of various type materials. All materials shall be supplied by the contractor. 34 Nut & Bolt 35 LT Clamp for PCC 36 11 kv F Clamp 37 Shackle Insulator 38 3 Phase D.O FUSE SET Complete 39 Wiremesh fencing of 11/0.4 KV substation shall be made rectangular off size as per site requirement not exceeding 3 meter fabrication 45x45x5mm angle. material shall be supplied by the contractor. 40 Construction of massionary type transformer plinth of Suitable sizewith brick ,cement, coarse sand , sand & brick ballast. Filling of sand in the hollow space , plastering , outer surface in ration 1:4:6 top of the plinth 4 thickness grouting of 2 nos MS Channel of size 100x50x2000 mm on the top of the plinth for placement of transformer . All material shall be supplied by the contractor. 41 Erection of pipe type earthng for DT with the help of B-Class G.I pipe of size 1.5 inch dia, 40 feet deep boring by providing G.I strip 50x6 MM, 6 meter long attached with clamp L-piece nut & bolt & G.I cap 42 Dismentaling of 10/16/25/63/100/250 KVA T/F & Carriage site to store . Last date of submission for this tender is 2025-09-11. This is a Transformer Supply tender in Barabanki, Uttar Pradesh