Madhyanchal Vidut Vitran Nigam Limited

Madhyanchal Vidut Vitran Nigam Limited has published Tender For For Laying Of Ab Cable, Conductor Replacement, Interpolling Etc At Various Places Under B.P 2025-26 Under Edd-Baheri. - The work of safe carriage of the following material from CB Ganj store center to work siteunder the jurisdiction of EDD-Baheri Approx. distance upto 100 Km. Including safe loading and unloading. 2 PCC Pole 8.5 Mtr 3 ST Pole 11 Mtr 4 ST Pole 13 Mtr 5 AB Cable 3x50 sqmm 6 AB Cable 3x95 sqmm 7 AB Cable 3x120 sqmm 8 ACSR Weasal Conductor 9 Other Line material 10 Erection of Single/Double pole in H.T/L.T lines including fitting of all accessories as per RESSPO Norms 11 PCC Pole 8.5 Mtr (Single) 12 Grouting of following Pole with 1:4:8 mixture in size(450x450x1500mm.) including cost of cement/BB & sand Required as per RESSPO Norms 13 PCC Pole 8.5 Mtr (Single) 14 The work of Driving the earthing electrode and making connections with 6 S.W.G. GI wire as per RESSPO Norms 15 Construction of T/F plinth 2x2x1 m3 for mounting 250 KVA T/F including foundation work (below ground 0.5 M), Brick work, RCC slab of 4” thickness and plastering in 1:6 ratio with 02 Nos channel pieces of 1.5 mtr long of size 100x50x6 mm compete in all respect 16 Cage fencing of 250 KVA Plinth mounted transformer in Town areas to avoid electrical human/cattleaccidents by fabrication of cage (1 Inch Sq wiremesh) made of 10 No gauge in suitable size angle iron frame of size 7.5(L)x5(W)x8’(H) by strenghtening of wire mesh 20x3 mm M.S. flat haorizentally as well as vertically, Grouting the panel with 1:2:4 cement/coorse send/brick ballast. The Frame should be bolted on angles at the four corners so that frame may be un-bolted/bolted at the time of replacement of the transformer. Provision of 1 gate should be there for maintenance of the transformer. Painting (1 coat of red oxide + 2 coat of Bus green enamel paint). The wire mesh should be earthed with 50x6 mm MS earthing strip with existing earthing of Transformer Body. All men, material and T&P provided by the contractor to complete the fabrication, transportation and installation. 17 Laying, Stringing & Sagging of Following Conductor complete in all respect 18 AB Cable 3x50 Sq mm 19 AB Cable 3x95 Sq mm 20 AB Cable 3x120 Sq mm 21 ACSR Weasal Conductor 22 The work of digging of pits, erection of Stay Clamp, Insulator etc. 23 Grouting of stays, 1:4:8 cc ratio (600x600x300mm.) as per RESPO norms. 24 Fixing of 3 Phase Distribution Box 25 Gaurding at Road Crossing Complete in all respect 26 Supply and Fixing of Following Material as per RESPO norms complete in all respect (would be Provided by contractor through approved vendors of Discom at his own cost) 27 LT Clamp Nut & Bolt 28 Holding Clamp for T Off, Cross Arm and Expouser Pole 29 PG Clamp 30 Piercing Connector 31 F Clamp with Nut & Bolt 32 X-Arm Clamp with Nut & Bolt 33 Eye Hook Clamp 34 j Hook Clamp 35 Eye Hook WITH Suspension Clamp 36 Eye Hook WITH Dead End Clamp 37 Earthwire Clamp 38 Distribution Clamp . Last date of submission for this tender is 2025-09-15. This is a Cable Laying tender in Bareilly, Uttar Pradesh