Madhyanchal Vidut Vitran Nigam Limited

Madhyanchal Vidut Vitran Nigam Limited has published Tender For 11 KV Town Feeder Bifurcation Work Under Nagar Nikay Under EE, EDD, Haidergarh Barabanki.- 1 Safe loading, carriage including unloading and proper stacking of following materials from Central Store Barabanki / JE Store to site of work. 2 PCC POLE 8.5 METER LONG 3 TOP CHANNEL 4 T-OFFCHANNEL 5 A.C.S.R. RABBIT CONDUCTOR 6 LT ABC (3X95+1X70+1X16) SQ. MM. 7 11 KV POLYMERIC PIN INSULATOR 8 11KV POLYMERIC DISC INSULATOR 45 KN 9 11KV POLYMERIC DISC FITTING 45 KN 10 STAY ROD 16X1800 11 STAY WIRE 12 MS EARTHING ROD (2540X20 MM) 13 GI WIRE (5 MM 6SWG) FOR EARTHING 14 11 KV XLPE CABLE 3X185 MM2 15 CABLE JOINTING KIT OUTDOOR 11 KV 185MM2 16 CABLE JOINTING KIT INDOOR 11 KV 185MM2 17 11 KV X-ARM V TYPE 18 11 KV GUARDING ANLGE 19 GI WIRE (4 MM 8SWG) FOR GUARDING ANLGE 20 11 KV DROPPER ANGLE 21 TF 100 KVA 22 11 KV VCB, O/G CTR 200/100/5A, 350 MVA 23 Dragging of pole from JE Dump Store to site 24 Grouting of PCC Pole 25 Erection of Stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, thumble turn buckle andstay insulate etc. digging of pit of size of size 0.4x0.6x1.6 m for grouting 1:3:6 cement concrete, with stay of size 7/8 SWG, nuzzling & Grouting. 26 Installation of Mounting of Following capacityof Transformer including its connection between 11 KV and LT Line mountingprovinding Crimping type Aluminium lugs of required size.( All the material except transformer will be arranged by the contractor) 27 Mounting of 100 KVA Tranformer 28 Stringing and sagging of 11 KV line with ACSR Rabbit Conductor including nuzzling binding and jumpering (Rabbit conductor will be provided by the department) 29 Errectionof Substation type double pole with ST/PCCincluding mounting of Top Channal Dropper Channel, base angle with clamps with nut & bolt 33/11 KV line including grouting of support and plinthing 300 mm above ground level, fitting of 33/11 KV pin & Pin insulator. 1/6 of total lenght of poles will remain under the ground and planted on stone pad of Size 300x300x75 MM. 30 Errectionof singlePCC /ST Pole for Stringing and sagging of conductor 1/6 of total length of poles will remain under the ground and planted on stone pad of size 300x300x75 mm. 31 Stringing and sagging of(3X95+1X0+1X16) Sqmm ABC(Cable will be provided by the department) 32 Laying of 11 KV XLPE CABLE 3X185 Sq. MM (XLPE Cable will be provided by the department) 33 Earthing of pole with MS Earthing. 34 Installation of11 KV VCB, O/G CTR 200/100/5A, 350 MVA 35 Concreating and pilinthing of ST& PCCPole 18x24 CM. 36 Fabricate with hole suitable size in steel items, receive from central store lightas top channel/dropper channel sub station base angle etc. 37 Provinding & Fixing of various type materials. All materials shall be supplied by the contractor. 38 11 KV F-CLAMP FOR PCC POLE 39 11 KV X-ARM HOLDING CLAMP 40 STAY/LOOP INSULATOR 41 HOLDING CLAMP FOR TOP/T-OFF/DROPPER/GAURDIG ANGLE 42 11 KV STAY CLAMP 43 LT POLE CLAMP FOR PCC 44 EYE HOOK CLAMP 45 DEAD END CLAMP 46 SUSPENSION CLAMP 47 NUT BOLT & WASHER 48 GI PIPE 6 DIA 49 HOLDING CLAMP FOR SUPPORT OF GI PIPE 50 LOOPING & CHOPPING OF TREE BRANCHES 51 LT ARMOURED CABLE 4X2.5 MM2 52 LT ARMOURED CABLE 2X2.5 MM2 53 Wiremesh fencing of 11/0.4 KV substation shall be made rectangular off size as per site requirement not exceeding 3 meter fabrication 45x45x5mm angle. material shall be supplied by the contractor. 54 Construction of massionary type transformer plinth of Suitable sizewith brick ,cement, coarse sand , sand & brick ballast. Filling of sand in the hollow space , plastering , outer surface in ration 1:4:6 top of the plinth 4 thickness grouting of 2 nos MS Channel of size 100x50x2000 mm on the top of the plinth for placement of transformer . All material shall be supplied by the contractor. 55 Earthing of T/F Pipe type with 40 fit deep borring and providing GI Pipe 1.5 dia (60 fit GI Pipe) and GI strip 25x5 mmx6 meter long attached with clamps, L piece, nut & bolts and GI Pipe Cap. All material shall be supplied by the contractor. 56 PIPE TYPE EARTHING OF 11 KV VCB . Last date of submission for this tender is 2025-03-25. This is a Feeder Pillar tender in Haidergarh, Uttar Pradesh