Madhyanchal Vidut Vitran Nigam Limited

Madhyanchal Vidut Vitran Nigam Limited has published Tender For Selection Of Working Agency For Deposit Work(Running Work) Under Edd Ramsanehi Ghat - Safe loading Carriage including unloading and proper stacking of following materials from central store Barabanki / JE Store to site of work. 2 PCC Pole /STP Pole 8.5/11/13 Mtr long 3 11kv Pin Insulator . 4 11kv Disc Insulator . 5 11kv X-ARM 6 MS Earthing Rod 7 Transformer 25/63/100 KVA 8 ABC Cable 3x50SQ. MM. 9 ABC Cable 3x95 SQ. MM. 10 ABC Cable 3x120 SQ. MM. 11 ABC Cable 1x25+1x16 SQ. MM. 12 11 KV XLPE Cable 3x70++3x120+3x185 sqmm 13 ACSR Weasal Conductor 14 LT D.B. Box 15 11KV CT/PT Unit 16 11 KV Metering Cubical/pilfer 17 Stay Set Complete 18 Other Line Material 19 Dragging of pole from JE Dump Store to site 20 Erection of Stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, andstay insulate etc. 21 Stringing and sagging of 11 KV line with ACSR Weasal Conductor including nuzzling binding and jumpering (weasal conductor will be provided by the department) 22 Pipe Earthing ( Boring type 40 Feet) 23 Installation of Mounting of Following capacityof Transformer including its connection between 11 KV and LT Line mountingprovinding Crimping type Aluminium lugs of required size.( All the material except transformer will be arranged by the contractor) 24 Mounting of 25/63/100 KVA Tranformer 25 Installation of fixing 11 KV CT/PT with required meterial. 26 Installation of fixing 11 KV Pilfer Unit with required meterial. 27 Errectionof Substation type double pole with PCC /STP 8.5/11/13 PoleMtr. Long . including mounting of Top Channal Dropper Channel, base angle with clamps with nut & bolt, fitting of 33/11 KV pin & Pin insulator. 28 Errectionof singlePCC /ST Pole for Stringing, jumpharing and sagging of conductor 1/6 of total length of poles 29 Stringing and Sagging of LT 1x16 ABC Cable (LT ABC Cable will be provided by the department) 30 Stringing and Sagging of LT 3x50 ABC Cable (LT ABC Cable will be provided by the department) 31 Stringing and Sagging of LT 3x95ABC Cable (LT ABC Cable will be provided by the department) 32 Stringing and Sagging of LT 3x120ABC Cable (LT ABC Cable will be provided by the department) 33 Installation of D.B. Box 34 Earthing of pole with MS Earthing. 35 Provinding & Fixing of various type materials. All materials shall be supplied by the contractor. 36 Nut & Bolt 37 PG CLAMP 38 F-Clamp 39 Clamp for Top/ Dropper and T-off2/Stay/LTetc. 40 GI Pipe 3&4 DIA 41 L T Insulator 42 SMC box (Fuse Set) 43 TPMO SET 44 Looping and Choopping of tree branches in laying on the route of line. 45 Laying of 11kv XLPE Cable 3x70, 120,185 Sq.By MM Manually 46 felling and heat treatment of cable box 47 Concreating and pilinthing of ST& PCCPole 18x24 CM. 48 Construction of masonry type transformer plinth of sutable size 1.5×1.5×1.5 M with brick, cement, Coarse sand, sand & brick ballast, filling of sand in the hollow space, plastering outer surface in ratio 1:4:6 top of the plinth 4” thickness grouting of 2 nos. MS Channel of size 100×50×200 mm on the top of the plinth for placement of transformer. (All the material will be arranged by the contractor) 49 Construction of retaining wall, fabrication & erection of Wire Mesh fencing of suitable size as per physical condition.. (All the material will be arranged by the contractor at his own cost). 50 Construction of LT Distribution Cum LT ProtectionBox in Rectangle Shape made of MS Angle of Size 50x50x6 MM, 7.5 Feet long For Installation of Henley Type Tailness Fuse Unit 300 AMP 650 Volt 3 nos Outgoing Circuits With Copper Bus Bar of size 1000x50x6 mm Including Proper Grouting of Structure by digging of pits off size 300x300x600 mm with the help of cement, coresand and aggregate in the ratio 1:3:6 and fabrication of structure complete. 51 Fabricate with hole suitable size in steel items, receive from central store lightas top channel/dropper channel sub station base angle etc. 52 Looping of cable and mounting of pole. 53 Gaurding of 11 KV Line 54 Dismentaling of 11 KV Line & poll 55 Othar line work . Last date of submission for this tender is 2025-07-02. This is a Wall Construction tender in Barabanki, Uttar Pradesh