Irrigation Department

Irrigation Department has published Tender For Lot-12 Renewal Work Of Service Road From Km 13.000 To 13.800 At Tikaria Dy. - Chutting heavy under growth and bushes upto 7.50 cm including removel of roots with collection and removel 2 Excavation in Mar,Kabar and kankar mixed soils in digging or in embankment including lead upto 30 M and lift 1.50 M including dressing making profile and machnical comaction all complete work and T&P etc. 3 Construction of granular sub-base by providing well graded material,spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per technical Specification clause 401. 4 WBM Grading 2 providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing , rolling with smooth wheel 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening/ biding materials to fillup the interstices of course aggregates, watering and compacting to the required density grading 2 as per MORD technical specification clause 405 5 WBM Grading 3 providing, laying,spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing , rolling with three wheel 80-100 KN static roller in stages to proper grade and camber , applying and brooming, crushable screening to fillup the interstices of course aggregates , watering and compacting to the required density grading 3 as per MORD technical specification clause 405 6 Providing and applying prime coat with bitumen emulsion (S.S.-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 7 Providing and applying tack coat with Bitumenusing Bitumen V.G.-10 distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. 8 Providing laying & rolling of open graded premix carpet of 20 mm thickneess composed of 13.2 mm to 5.6 mm aggregates using VG-10 grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including spreading mixing in a suitable plant, laying and rolling with three wheel 80-100 KN static roller in capacity, finished to required level and grades to be followed by seal coat-Technical Specification Clause 408 9 Providing and laying seal coat by mannual means with VG-10 Gr.grade bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type Cas per Technical Specification Clause 510 10 Providing and laying hot applied thermoplastic compound 2.5 MM thick including reflecorising glass beats @ 250 per Sqm. Area thickness of 2.5 MM exclusive of surface applied glass beats as per IRC : 35 the finished surface to be level, uniform and free from streaksand holes at site 11 Brick edging on road with m-150 class bricks on edge 3 wide and 4-1/2 deep laid with mud mortor,finished to the required temples in proper alignment & also dressing ramming the excaveted earth as directed by engineer in charge. 12 Providing and fabricating MS sign Board of size 4×3 using ISA 40×40×6 mm and 25x3 mm flat iron bracing with 18 SWG MS sheet with one coat of red oxide primer to fixed at 11 level of minimum 3 from round and 2 deep into the ground with 3 angle cut and turned to opposite side to make a hold fast and steel angle i/c all cost of all labour, material, Paiting letter writting etc. as per direction and fully satisfaction of Engineer in charge. 13 Note-The Quantity may varies as per site condition and contractor will bound to excute without any extra claim. . Last date of submission for this tender is 2025-10-02. This is a Road Work tender in Hamirpur, Uttar Pradesh