Irrigation Department

Irrigation Department has published Tender For Renovation Of Canal Service Road From From Km 11.210 To 12.050 Of Right Lower Khajuri Canal. - WBM Grading 2-Providing, laying spreading and compaction stone aggregates of 45-63 mm specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling withsmooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming stone sceeing/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading-2 as per technical specification clause 405 2 WBM Grading 3 Providing, laying, spreading compacting stone aggregate of specific size (22.4mm to 53mm) (W.B.M.-G-III) in base coat towater bound macadam specification including spreading in uniform thickness (compacted 75mm, loose 100mm)hand packing, rolling with three wheel 80-100 KN static roller in stages to proper grade and camber, applying and brooming stone screening/ binding materials to fill up the interstices of course aggregate watering and compacting to required densityincluding cost of allmaterial, labour, T&P etc. 3 Brick edging on both side of road with first class Bricks 8cm wide ,12cm deep laidwith mud mortar including cost of all material, labour ,T& P etc. (Per Km.) 4 Providing & applying primer coat with Bitumen Emulsion(SS) on prepared surface of granular base including cleaning of road surface andspraying primer at the rate of 0.75 kg/sqm using mechanical means. 5 Providing & applying Tack coat with Bitumen VG-10 using bitumen presser distributorat therate of 0.35 kg/sqm on the prepared bituminous/granuiar surface cleaned with mechanical broom. 6 Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm and 5.6 mm aggregates using viscosity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less then 200 tonne per hour laying and rolling with a smooth wheeled roller finished to required level and grades 7 Providing and laying premix seal coat with HMP of appropriate capacity not less than 200 tonnes/hours using crushed stone chipping 6.70 mm size and penetration bitumen of suitable grade . . Last date of submission for this tender is 2025-10-10. This is a Road Work tender in Mirzapur, Uttar Pradesh