Irrigation Department

Irrigation Department has published Tender For Resurfacing Of The Canal Service Road From Km 48.700 To 50.100 Of The Western Allahabad Branch - Repairing And Resurfacing Of Service Road On Western Allahabad Branch 48.700 To 50.100 - Providing, laying, spreading and compacting stone aggregates of specific sizes (45 - 63 mm gauge) to water bound macadam (WBM-2) as Levelling Coat specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per MORD per Technical Specification Clause 405 2 Providing, laying, spreading and compacting stone aggregates of specific sizes (22.4-53 mm guage) to water bound macadam (WBM-3) specification including spreading in uniform thickness, hand packing, rolling with smoothwheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per MORD Technical Specification Clause 405. 3 Providing and applying tack coat with Bitumen (VG-10)using bitumen pressure distributor at the rate of 0.35 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per MORD Technical Specification Clause 503. 4 Providing, laying and rolling of open-graded Premix Carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen (VG-10) to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in suitable plant, laying and finishing with paver finisher and compaction with three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by Seal Coat Type-C as per MORD Technical Specification Clause 508 5 Providing and laying Seal Coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type-C as per Technical Specification Clause 510 . Last date of submission for this tender is 2025-10-13. This is a Road Work tender in Kanpur, Uttar Pradesh