Irrigation Department

Irrigation Department has published Tender For Renovation Work From Km 2.531 To 4.468 On The Left Side Of Pachpokhara Minor Canal Service Road For The Year 2025-26 - Construction of subgrade and earthen shoulders with approved Material Obtained from Borrow Pits with all lifts and leads, transporting to site, compacted to meet requirement of Tables 300.2 as per Technical Specification Clause 301.1 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (G-3) 3 Providing and applying Prime coat with Bitumen emulsion (SS-1)using emulsiondistributor at the rate of 0.70 to 1.0 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 502. (Prime Coat) 4 Providing and applying tack coat with Bitumen emulsion using emulsiondistributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. (Tack Coat) 5 Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. (20mm PC) with Paver Finisher Mechanical. 6 Providing and laying of premix sand sealcoat with HmP of appropirate capacity not less than 75 tonne/hours using crushed stone chipping 6.7mm size and penetration bitumen of suitable grade as MoRT&HSpecification Clause 513 (II) . Last date of submission for this tender is 2025-10-25. This is a Road Work tender in Kasganj, Uttar Pradesh