Irrigation Department

Irrigation Department has published Tender For Road Renewal Work On Pratapgarh Dy From Km. 8.830 To Km. 9.410 On Left Bank Service Road - Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m and lead upto 30 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of table 300-1 and 300-2 as per technical specification clause 301.5 . 2 Construction of granular sub-base by providing coarse aggrigate material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at O.M.C.and compacting with vibratory roller to achieve the desired density for Grading 1 as per PWD Specification complete as per clause 401 3 Providing, laying, spreading and compacting stone aggregates of 63-45 mm sizes to water bound macadam G-2 specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 80-100 KN in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density for Grading 2 as per MORD Specification. Technical specification clause-405(2)A 4 Providing, laying, spreading and compacting stone aggregates of 53.22.4 mm sizes to water bound macadam G-3 specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 80-100 KN in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density for Grading 3 as per MORD Specification. Technical specification clause-405(3)A 5 8 cm wide and 12 cm deep brick edging on both side of the road including cost of material, all labour, T&P etc. required for proper completion of work. 6 Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. Technical specification clause-502(I) 7 Providing and applying tack coat with bitumen VG-10 using emulsion pressure distributor at the rate of 0.35 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.as per MORD specificaiton no. 503 8 Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 80-100 KN capacity, finished to required level and grades to followed by seal coat.as per MORD specificaiton no. 511 9 Providing and laying seal coat Type C sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall .as per MORD specificaiton no. 510 10 Earth work in making patries on outer side of the road in ordinary soil. to be done in 20 cm layer including ramming and dressing the surface to required levels and true to the patri template with side slopes,excluding royality. (excluding hire roller chargess). . Last date of submission for this tender is 2025-10-16. This is a Road Work tender in Pratapgarh, Uttar Pradesh