Irrigation Department

Irrigation Department has published Tender For Renewal Of Service Road Of Nagariya Dy. From Km. 16.200 To 17.300 - Earth work in cutting or in embankment in ordinary soil excavation to be in the form of a regular pits not exceeding 0.50m in depth and earth work in embankment to be in 20cm layers including ramming and dressing the surface to required levels and slopes and also including 1.5 m lift and 30m lead. The earth in form of cutting (b) to be used as spoil banks within 50m distance as directed by the Engineer-in-Charge. 2 Providing, laying, spreading and compacting stone aggregates of specific sized to water bound macadam (75 mm thick)specification including spreading in uniform thickness, hand packing, rolling with smooth wheel static roller 80-100 kn in stages to proper grade and camber, applying and brooming, crushable screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading III as per Technical Specification Clause 405. 3 Providing and applying tackcoat with bitumen(VG-10) using bitumen distributor at the rate of 0.35 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broomincludingall cost of labour T&P, material, carriage cost, compection,etc. required to complete the work at site , as per direction of engineer in charge. 4 Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. 5 Providing and laying seal coat sealing the voids onbituminious( VG-10) surface laid to the specified levels, grade and cross falls using Type C,includingall cost of labour T&P, material, carriage cost, compaction,etc. required to complete the work at site , as per direction of engineer in charge. . Last date of submission for this tender is 2025-10-20. This is a Road Work tender in Mainpuri, Uttar Pradesh