Irrigation Department

Irrigation Department has published Renovation work from Km 44.670 to Km 50.710 of the service road located on the right track of Sultanpur parallel branch in Ayodhya district. - Earthwork for making shoulder & daula onR/B of Sultanpur parallel branch between km44.670 to km 50.710 including lead upto 30m and lift upto 1.50m, manual compaction & dressing to profile etc. 2 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam II specification including spreading in uniform thickness, hand packing, rolling with Smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming crushable screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405. 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam III specification including spreading in uniform thickness, hand packing, rolling with Smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical Specification Clause 405. 4 Providingand applyingprimercoat withbitumenemulsion (SS2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.75 kg/sqm using mechanical means as per Technical Specfication clause 502. 5 Providing and applying tack coat with Bitumen VG-10 using bitumen pressure distributor at the rate of 0.25-.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503 6 Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 KN static roller capacity, finished to required level and grades to be followed by seal coat Type C as per Technical Specification Clause 508. 7 Providing and laying seal coatType C by manual means with 80/100 grade bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fallas per Technical Specification Clause 510. . Last date of submission for this tender is 2025-10-14. This is a Road Work tender in Ayodhya, Uttar Pradesh