Irrigation Department

Irrigation Department has published Tender For Renovation Of Damaged Canal Road Of Rampur Mainer From Km 9.000 To Km 13.300 In District Ballia Lot 05 - Earth workembankment on shoulder side of service road with all lead & lift including cost of labour,T&P for proper completion of work as directed by Engineer-in-charge& as per I.D. specification. 2 WBM-G2 Providing, laying, spreading and compacting stone aggregates of specific size 45-63mmto water bound macadam specification including spreading in uniform thickness hand packing, Rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber applying and brooming, stone screening to fill up the interstices of coarse aggregate, watering and compating to the required density . 3 WBM-G3 Providing, laying, spreading and compacting stone aggregate of specific size 22-4-53mm to water bound macadam specification including spreading in uniform thickness hand packing, Rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber applying and brooming stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density. 4 PRIMER COAT Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg/ sqm. 5 TACK COAT Providing and applying tack coat with bitumen(V.G. 10) using pressure distributor at the rate of 0.35kg per sqm on the prepared granular surface treated with primer & cleaned with machanical broom. 6 HOT MIX PLANT (PC) Providing, laying and rolling of open graded premix carpet of 20 mm thickness composed of crushed aggregate of specified grading using penetration grade bitumen binder including transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade,level and alignment,rolling with smoth wheeled,vibratory and tandem rollers to achieve the desired comnpaction. 7 SEAL COATProviding and laying Seal coat sealing the voids in a bituminious surface laid to the specified levels grade and cross fall using type C 8 ROAD MARKINGwith hot applied thermoplastic compound with refilling glass bleads on bituminious surface 2.5 mm thick including refilling glass blade @250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass blade ,the finished surface to be level, uniform and free from streakes and holes. . Last date of submission for this tender is 2025-10-04. This is a Road Work tender in Ballia, Uttar Pradesh