Irrigation Department

Irrigation Department has published Tender For Patch Repair on Canal service road of Nagwa Dy from Km 7.400 to Km 9.700 - Providing, laying, spreading and compacting stone aggregates of specific sizes (45-63 mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. WBM Grading-2 as per MORD specification Clause 405 2 Providing, laying, spreading and compacting stone aggregates of specific sizes (22.4-53mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. WBM Grading-3 as per MORD Specification Clause 405 3 Providing and applying primer coat with bitumen emulsion (slow setting-2) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70 kg per sqm using mechanical means.as per MORD specification 502 4 Providing and applying tack coat with bitumen using pressure distributor at the rate of 0.30 kg per sqm on the prepared non bituminous surface cleaned with hydrolic broom as per MORDspecification503. 5 Providing, Laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 11.2 mm aggregates either using Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tones/hour, layoing and rolling with a smooth wheeled roller, finished to required level as per Tehnical Specification Clause 510 6 Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 . Last date of submission for this tender is 2025-10-07. This is a Road Work tender in Chandauli, Uttar Pradesh