Greater Noida Industrial Development Authority

Greater Noida Industrial Development Authority has published Tender For Repairing Work And Construction Shed And Chabutra In Shamshan Ghat Village-Kheri, Greater Noida., 1 BOQ 2 Cleaning jungle including up rooting of rank, vegetations grass, push, wood trees and samplings of grith upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish up to a distance of 50M. out side the periphery of area cleared.(SOR-259) 3 Excavation in foundation in ordinary soil(Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming ofexcavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (Where machine con not reach/move). (SOR-251/4.1.1) 4 Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. (SOR-5.4.3) 5 8:4:1(1 Cement 4Coarse sand 8 graded stone aggregate 40mm nominal size) 6 M-150 brick work in 1:4 cement and coarse sand 2.20 F.M. mortar in foundation and plinth including supply of all material, labour, T&P etc. required for proper completion of the work. (SOR-305(a)/6.1.4) 7 Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications RCC Grade M-25 using batching plant transit mixture and manual placing (MORTH-20, Item No. 15.11) 8 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. 9 Thermo-Mechanically Treated bars /Cold twisted bars. (Sail Steel) (DAR-2018/5.22.6) 10 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.(Sail Steel) 11 In gratings, frames, guard bar, ladder, railings, brackets, gates and similar worksDSR-18/10.25.2 12 M-150 brick work in 1:4 cement and coarse sand 2.20 F.M. mortar in super structure etc. supply of all material, labour andT&P etc. required for proper completion of the work. (SOR Item no-310-6.1.6) 13 12mm thick cement plaster of mix in1:6 (1 cement : 6 coarse sand) (DSR-2018/13.4.2) 14 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins,cutting to size and shape wherever required. 15 1.00 mm thick with zinc coating not less than 275 gm/SqmDSR-13/12.1.1 16 Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50 metres.(DAR/16.1) 17 I Shaped interlocking tiles Rubber mouided 60mm thick Precast cement concerete having plan dimension 200x(160+120mm) with compressive strength not be less than (M-35) and weight 5kg per no.specifications conforming to IS:15658-20006 (SOR-20/ch-1/28) 18 Painting or varnishing with valsper or other approved high grade enamel or super par synthetic clean varnish complete one coat over previously painted surface including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used should confirm ISI no. 105/106/133-1950.As in item (647) above but for every subsequent coat on previously treated surface SOR-647+648 19 Two or more coats on new work 20 Finishing walls with water proofing cement paint of required shade (DSR-13/13.109.1) 21 Old work (two or more coats applied @3.84 kg/10sqm) 22 Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Kms. from the site of work and including watering dressing etc. labour and T&P etc. required for the proper complition of the work. saplings of girth upto 30 cms. measured at a height of 1 M. above ground level and removal of rubbish upto a distance of 50 M. out side the periphery of areacleared.(SOR-2020/255) 23 Supply & freing of RCC Grill work (Jali) of the approved patterne make of site of work in Cement Concrete consisting of cement, approved course sand and 6mm, nominal fire stone grit in the proportion of 1.2.148 reinfored with 6mm dia. M.s wire/bar including supply of all materials, 1000rs, tools and plants,etc. required for proper completion of the work out excluding plaster on Jambs, sills and soffit of the o?ening 4:cm. thick 24 Providing wall putty on new surface with approved quality material of Berger/ J.K./Birla or similar make 2 coats. NEW ITEM CH.8 25 Distempering (first coat) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surface to give an even shade over and including a priming coat with cement primer of approved brand and manufacture such as Berger, J&N, Shalimar, Asian Paint after thoroughly brushing the surface free from mortar dropping and other foreign matters and also including the surface even with plaster of Paris or approved synthetic materials and sand papered smooth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. SOR 649 26 Washed stone grit plaster on exterior walls height upto 10 mtr above ground level, in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 coarse sand), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size), in pannels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings, complete as per specification and direction of Engineer-in-charge (payment for providing shall be made separately).DSR-18/13.72 27 Labour Cess will be paid extra as per applicable 28 GST will be paid extra as per applicable . Last date of submission for this tender is 2024-06-24. This is a Paving Equipment tender in noida, Uttar Pradesh