Directorate Of Local Bodies

Directorate of Local Bodies has published Tender For Construction work of complex (shop) in Nagar Panchayat Kumarganj - Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in-Charge:D.S.R 2.1 2 1:4:8 (1 Cement: 4 coarse sand (zone-III) derived from natural sources: 8 graded stone aggregate 40 mm nominal size derived from natural sources) D.S.R 4.1.8 3 Brick work with common burnt clay F.P.S. (non modular) bricks designation 7.5 in superstructure above plinth level up to floor all shapes and sizes in : 1:6 (1:Cement :6 coar sand) 4 Brick work with common burnt clay modular bricks of 7.5 in foundation and plinth in: 5 Brick work with common burnt clay F.P.S. (non modular) bricks designation 7.5 in superstructure above plinth level up to floor all shapes and sizes in: 1:4 (1:Cement :4 coar sand) 6 R,C.C. work with cement approved coarse sand and 20 mm gauge approved stone grit in proportion of 1:1.5:3 mix (1 cement: 1.5coarse sand :3 graded stone aggregate 20 mm nominal size) of strength not less than M-20 in door & window lintel excluding 4.2.2 supply of reinforcement & its cutting and binding but cum including its fixing & binding necessary centering & shuttering etc. & also inc. supply of all materials, labour T. & P. etc required for proper completion of the work with curing compete. For plinth bend. SI No. 287 7 Reinforced cement concrete work in beams, suspended floors, roo having slop up to 15 landing, bolconies, shelves, chajjas, linels, bands, plain window sills, staircase and spiral stair cases above plinth level up tp floor five level, excluding the cost of centring, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand (zone-III) derived from natural sources:3 graded stone aggregate 20 mm nominal 8 Mild steel (ribbed tor steel) or I/W in plain work such as reinforced concrete or reinforcement B/w when not I/C over all rates, wrought to required shape as necessary i/c bending for proper completion of the work and i/c of all (Material not Issued to store. SI No. 504 9 Providing and fixing T-iron frames for doors, windows and ventilators of mild steel Tee-sections, 10.13 joints mitred and welded, including fixing ofnecessary butt hinges and screws and applying a priming coat of approved steel primer. 10 E/w in cutting or filling embankment with ordinary soil in 20 cm. layers compacting to meet requirment including ramming and dressing of surface to requried levels and slopes and also including 1.5 mt. lift and cartage distance 3.00Km.including 11 12mm thick plaster with cement mortar in proportion 13.4.2 of 1:6 consisting one part cement and Six part of Coarse sand mortar. 12 Providing and applying white cement based putty of average thickness 1mm of approved brand and manufactured, over the plastered wall surface even and smooth surface as per DSR-13.26 13 Finishing walls with Acrylic smooth exterior paint of required new work (Two or more coat applied @ 1.67/tr/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm). Including supply of all materials and labour etc. Proper completion of work. 14 Painting or varnishing on three coat iron work in small or new wood work with one coat of ready mixed priming paint and one coat of approved superior quality ready mixed paint of clear synthetic varnish including for proper completion of Wirk. Paint to be used should confirm 15 Providing and laying rectifided Glazed ceramic floor tiles of size 600x600 mm or more (thikness to be specified by the manufacturer) of 1st quality 11.4 conforming to IS15622, of approved make, in all colour dedo laid with 1:4 cement and coarse sand mortar finished and jointing with white cement slurry and pigment & polising complete including supply of 16 S/F of 6mm thick tiles in flooring or dedo laid with 1:3 cement and coarse sand mortar finished and jointing 11.38 with white cement slurry and pigment & polising complete including supply of all materials and labour etc. Proper completion of work. Si. No. 628Provision for electicity at site. 17 Wiring point for light in PVC Conduit with 1.5 Sqm. FR PVC Insulated Multistarand copper conductor cable as earth wire drawn inside the conduit. SI No. 131© 18 Wiring point for Fan/ Fresh air Fan in PVC Conduit with 1.5 Sqm. FR PVC Insulated Multistarand copper conductor cable as earth wire drawn inside the conduit. SI No. 140 C 19 Supplying and fixing two module stepped type electronic fan reg ulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. 20 Supply and fixing of Power pluge. Dsr No 1.12 21 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth DSR No 1.14.1 22 Supply & fixing of LED tubelight with batten suitable for up to 1x22 Watt LED tubelight fitting including no 16.00 1190.00 tube on surface complete in all respects. CAT-AAA 23 Supply and fixing of LED bulb at site MR (Only for estimating perpose) 24 Supplying and fixing brass batten/ angle holder including connection etc. as required. 25 Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with 26 Provision for fire fighting at site( As par mr) 27 Provision of Sign Board/Information stone . Last date of submission for this tender is 2025-05-19. This is a Building Work tender in kumarganj, Uttar Pradesh