Department Of Local Bodies

Department Of Local Bodies has published Tender For Rejuvenation of Anganwadi Center located in Ramganj. - E/W in excavation in Foundation in ordinary soil as per drawing and technical specification I/c removal of stumps and other deleterious materials and disposal upto a lead of 50 m.dressing for sides and bottom and backfilling in trenches with excaveted suitable material 3 concrete with 4 cm guage brick ballast ,Fine sand of 1.25 F.M and cement (1:6:12) in foundationi/c supply of labour material,tools & plants etc.required for proper completion of work 4 First class-150 brick in 1:4 cement and coarse sand of 1.25 F.Mmodulus morter in foundation and plinth i/c supply of all materialslabour & toolsetc required for proper comp.of work 5 12 mm thick cement plaster (1:4) cement & fine sand morter i/callcomp. 6 R.C.C work (1:2:3) cement, coarse sand & stone grit 20 mm i/c all comp.. 7 Providing wall putty on new surface I/c all comp.as per DSR 156.05 8 Two coat paintingwith plastic emulsion paint of approved brand to give an even surface 9 Providing and applyingplaster of parisputty 2 mm thickness over plastered surface even and smooth complete 10 E/W in cutting and filling cartage upto 03 km i/c all comp. 11 P/L G.S.B. Compacted with road roller i/c all compleate 12 S/Laying of 80mm thick Zig-zag inter locking etc. all comp. 13 P.C.C. (1:2:4) C.C. Sand & S. grite 20 mm i/c all comp. 14 Laying & fixing precast terrazzo tile 22 mm thick with graded marble chip of size up to 12 mm, laid in floors 15 S/f of flush door i/c all 16 ventilation 17 S/f of glazed window i/c all 18 Wiring point for light with 1.5 sq.mm. FR PVC insulated multi strand single core copper conductor cable in heavy gauge rigid steel conduit pipe partly concealed in the wall and partly laid in slab along with the reinforcement before concreting, complete with 14 SWG copper earth continuity wire, modular type switch & ceiling rose/angle/batten holder on 3mm. Thick phenolic laminated Bakelite sheet etc. complete in all respects as directed including matching color wash. 19 Wiring point for fan/fresh air fan (light. duty exhaust fan) with 1.5 sq.mm. FR PVC insulated multi strand single core copper conductor cable in heavy gauge rigid steel conduit partly concealed in the wall and pally laid in slab along with the reinforcement before concreting, complete with 14SWG copper earth continuity wire, piano type switch & ceiling rose on 3mm. Thick Bakelite sheet etc. Complete. in all respects, as directed including matching. 20 S/F of LED Tube light with batten suitable for up to lx22 W LED tube light fitting including tube on surface complete in all respects. 21 Errection and testing of ceiling fan and regulator for room height upto 3.5 meters including supply of3mm thick G.I. rod 19 mm dia duly painted. 22 E/W in cutting and filling cartage upto 03 km i/c all comp. 23 S/F hexagonal fan box with hexagonal side of approx. 80 mm in length fabricated from 16 SWG M.S. sheet in corporating 10 mm dia. M.S. round bar duly bent for supporting fan hanger duly painted with red oxide and screwing arrangement with wiring conduit laid in the R.C.C. roof before concreting along with supply of all material, labour, T&P etc. required for proper completion of the work. 24 Supply and fixing of fan regulator (Modular) 120-280 V, ISI marked, on the exiting switch board including making connection, all the required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer I/C of work. 25 Supply and fixing and concealing of 25mm dia. 2 mm thick PVC conduit pipe with ISI mark embossed and with PVC accessories confirming to IS No. 3419 for drawing wires duly sealed at joints with original resin/ adhesive to make the complete piping rigid, plastering with cement sand mortar finished to the level with matching color wash including cost of all material labour and T&P etc. required for proper completion of the works as per directories and to the satisfaction of Engineer-in-Charge. 26 providing and fixing ceiling fan 27 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 1 liter low level white P.V.C. flushing cistern, including flus pipe, with manually controlled device (handle lever conforming to IS : 7231, with all fittings and fixture complete, including cutting and making good the walls and floors wherever required. 28 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. 29 Providing and fixing Stainless Steel A ISI-304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. 30 P/F white vitreous chine flat back orwallcorner type lipped front urinal basin of 430*260*265 mm sizes respectively DSR17.23 31 Provlding & fixing soil, waste and vent pipes 32 75 mm 33 Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fitting of diameters. 34 75 mm 30 35 Providing and fixing CPVC pipe for hot and cold water supply including all fittingcomplete as per direction of Engineer-in- charge 36 P/P on terrace at allfloor polythene water storage tank IS :12701 marked, with cover and siutable locking arrangement and making necessary holes for inlet,outlet and overfloe pipes but without fittings as per DSR18.48 37 Constructing brick masonry manhole in cement mortar 1:4(1 cement : 4 coarse sand) RCC top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design: 38 P/Lpolished granite stone flooring in required design and pattern , in linear as well as curvilinearportion of the buildingwith 18 mm thick stone slab over 20 mm averagethick base of cement morter 1:4 laid and jointed wioth cement slurry as specified by engineer in charge as per DSR11.56.1 39 Linear table with both side pedestal unit 40 Sitting chair 41 Sitting chair . Last date of submission for this tender is 2025-02-27. This is a Building Work tender in ramganj, Uttar Pradesh