Department Of Handlooms And Textiles

Department Of Handlooms And Textiles has published Bids Are invited for Custom Bid For Services - Renovation Of It Room In Office Of Nhdc - Dismantling Wooden Boardings In Lining Of Walls And Partitions, Excluding Supporting Members But Including Stacking With In 50 Metres Lead Thickness Above 25 Mm Up To 40 Mm. , Providing And Fixing Aluminum Work For Doors, Windows, Ventilators And Partitions With Extruded Built Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Junctions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminum Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminum Snap Beading For Glazing / Paneling, C.P. Brass / Stainless Steel Screws, All Comp1ete As Per Architectural Drawings And The Directions Of Engineer-In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately) For Fixed Portion Polyester Powder Coated Alumini (Minimum Thickness Of Polyester Powder Coating50 Micron) , Providing And Fixing Aluminum Work For Doors, Windows, Ventilators And Partition With Extruded Build Up Standard Tubular Sections/ Appropriate Z Sections And Other Sections Of Approved Make Conforming To Is: 733 And Is: 1285, Fixing With Dash Fasteners Of Required Dia And Size, Including Necessary Filling Up The Gaps At Functions, I.E. At Top, Bottom And Sides With Required Epdm Rubber/ Neoprene Gasket Etc. Aluminum Sections Shall Be Smooth, Rust Free, Straight, Mitred And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminum Snap Beading For G1azing / Pane1ing, C.P. Brass / Stainless Steel Screws, All Comp1ete As Per Architectural Drawings And The Directions Of Engineer- In-Charge. (Glazing, Paneling And Dash Fasteners To Be Paid For Separately): , Providing And Fixing 12 Mm Thick Prelaminated Partic1e Board Flat Pressed Three Layer Or Graded Wood Particle Board Conforming To Is: 12823 Grade I Type Ii , In Panelling Fixed In Aluminum Doors, Windows Shutters And Partition Frames With C.P. Brass / Stainless Steel Screws Etc. Complete As Per Architectural Drawings And Directions Df Engineerin-Charge. Pre-Laminated Particle Board With Decorative Lamination On One Side And Balancing Lamination On Other Side , Providing And Fixing Glazing In Aluminum Door, Window, Ventilator Shutters And Partitions Etc. With Epdm Rubber/ Neoprene Gasket Etc Complete As Per The Architectural Drawing And The Directions Of Engineer-In-Charge. (Cost Of Aluminum Snap Beading Shall Be Paid In Basic Item): With Float Glass Panes Of 5 Mm Thickness (Weight Not Less Than 12.50 Kg/Sqm) , Providing And Fixing Aluminum Die Cast Body Tubular Type Universal Hydraulic Door Closer (Having Brand Logo With Isi, Is: 3564, Embossed On The Body, Door Weight Upto 35 Kg And Door Width Upto 700Mm), With Necessary Accessories And Screws Etc. Complete , Providing And Fixing Double Action Hydraulic Floor Spring Of Approved Brand And Manufacture Conforming To Is : 6315, Having Brand Logo Embossed On The Body / Plate With Double Spring Mechanism And Door Weight Upto 125 Kg, For Doors, Including Cost Of Cutting Floors, Embedding In Floors As Required And Making Good The Same Matching To The Existing Floor Finishing And Cover Plates With Brass Pivot And Single Piece M.S. Sheet Outer Box With Slide Plate Etc. Complete As Per The Direction Of Engineer-In-Charge. With Stainless Steel Cover Plate Minimum 1.25Mm Thickness , Providing And Fixing Aluminum Handles, Isi Marked, Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is:1868) Transparent Or Dyed To Required Color Or Share, With Necessary Screw Etc Complete 1.25Mm , Providing And Fixing Aluminum Tower Bolt, Isi Marked Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is:1868) Transparent Or Dyed To Required Colour Or Shade With Necessary Screws Etc Complete: 150X10mm , Providing And Fixing Bright Finished Brass 100 Mm Mortice Latch And Lock, Isi Marked, With Six Levers And A Pair Of Anodised (Anodic Coating Not Less Than Grade Ac 10 As Per Is:1868) Aluminum Lever Handles Of Approved Quality With Necessary Screws Etc Complete , Providing And Installing Roller Blind At Clestory Windows , Finishing With Deluxe Multi Surface Paint System For Interior And Exteriors Using Prime As Per Manufactures Specification Two Or More Coats Applied On Walls @1.25Ltr/10Sqm Over And Including One Coat Of Special Premier Applied @ 0.75 Ltr/ 10Sqm , French Spirit Polishing: One Or More Coats On Old Work , Melamine Polish On Wood Work (One Or More Coat) , Repair Of Windows/ Doors With Necessary Hardware Fittings. , Repair Of Old Gypsum Board Ceiling As Per The Site Requirement , Copper Wire , Copper Wire , Copper Wire , Copper Earth Wire , Flexible Pipe , Pvc Type , Mcb Box , Mcb , Mcb , Mcb , Mcb , Combined Box , 1 Ton Split Ac , 2 Ton Split Ac , 3-Core Electrical Wire For New Ac Installation , Gang Box , Replacement Of Tubelights In Old Panel Light , Roma Sheet , Switch , Pvc Batten. Last date of submission for this tender is 2026-08-03. This is a Building Work tender in Gautam Buddha Nagar, Uttar Pradesh