Dakshinanchal Vidyut Vitran Nigam Limited

Dakshinanchal Vidyut Vitran Nigam Limited has published Tender For The Work Of Pole Wedling & Plinth Of Pole Under Eudd- Hathras - Straightening of tilted single ST Poles in the existing lines as per direction of supervising engineer. 2 Opening & Reinstalling of Service Cable for Pole Welding 3 Digging of proper size of pit for following work of damaged steel support with the provision of temporary support :-Then reinforcement of steel support by welding of 04 Nos. 2 feet long M.S. angle iron of 50x50x6 mm. at equal distance around each pole & also welding of these angle iron with each other by providing M.S. flat of size 35x6 mm. in round. 4 Construction of round plinth around the S.T. Poles / RS Joists / Rails will be done with cement, sand and concrete in 1:3:6 ratio of size 450 mm. dia & 600 mm height (300 mm. under the ground + 300 mm. the ground). The plinth should be plastered with ½ inch thick cement and sand of ratio 1:4 & taper rounding the upper most part of the plinth. The rate will include all cost of material, labour and T&P etc. for completion of the above work which will be provided by the contractor at his own cost. . Last date of submission for this tender is 2025-10-03. This is a Electric Pole tender in Hathras, Uttar Pradesh