Dakshinanchal Vidyut Vitran Nigam Limited

Dakshinanchal Vidyut Vitran Nigam Limited has published Carriage of PCC pole from Store Center Kunera Etawah to site of work through the Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work. 2 11/13 Mtrs. long ST pole / 9/8.5 Mtrs. long PCC pole 3 Line material i.e. conductor, G.I. wire TPMO stay rod, disc insulator, cross arm, Angle channel, Different type of Clamps and other required material 4 ACSR Weasel Conductor 5 ACSR Dog Conductor 6 Cable Alluminium 3x70 Sqmm 7 33 Kv XLPE Cable 3x120 Sqmm 8 25 KVA Distribution Transformer 9 100 KVA Distribution Transformer 10 Erection ofsinglesupportby11/13 Mtrs. long ST/9/8.5 Mtrs. long PCCpole includingfixingcompleteHT/LT fittingsasperRESSPOMunualincludingthecostoflabour, T&P and carrier etc. required for proper completion of work. 11 Groutingofsinglesupport 9/8.5 Mtrs. long PCC pole asperRESSPOManual including of the cost of labour,T&P and carrier etc. required for proper completion of work. The support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc. 12 Erection & grouting ofdouble pole including fixing completeHT/LTfittingasperRESSPOManualincludingthe cost of labour, T&P and carrier etc. required for proper completion of work. The support shall be grouted with cement, sand & brick ballast in ratio 1:4:8 including the cost of arrangement of cement, sand, brick ballast etc. 13 Laying, sagging, stringing, binding & jumpering of ACSR Weasel Conductor on the newly erected pole asperRESPOmanualandasperdirectionofsupervising engineer,includingthecostofarrangementoflabour,T&P carrier etc. required for proper completion of work. 14 Laying, sagging, stringing, binding & jumpering of ACSR Dog conductor on the newly erected pole asperRESPOmanualandasperdirectionofsupervising engineer,includingthecostofarrangementoflabour,T&P carrier etc. required for proper completion of work. 15 Layingspreading,liftingandfinalsaggingofAlluminium Cable Sutaible Size. includingfixingof allaccessoriesasper RESSPO Manual and as per direction ofsupervising engineer, includingthecostofarrangementoflabour,T&Pcarrieretc. required for proper completion of work. : 16 Erection and grouting of stay set including the work of nozzling etc. as per RESPO manual and also including the cost of arrangement of allgrouting material, labour, T&P etc. required for proper completion of work as per RESSPO Manual. 17 Fixing &connectingofearthingrods as perRESSPOManual includingthecostoflabour,T&Petc.requiredforproper completion of work. 18 Mounting of 25 KVA Transformer on the Single Pole/Double pole/Plinth structures and connections thereof. 19 Mounting of 100 KVA Transformer on the Single Pole/Double pole/Plinth structures and connections thereof. 20 Digging, laying and back filling of 3X120 Sqmm XLPE cable including the cost of Cable hoisting and making loops/ HDPE pipe/clamps as per RESPO manual and as per direction of supervising engineer including the cost of arrangementof brick, sand, labour and T&P etc. required for proper completion of the work. 21 Filling Of 11 Kv Heat Shrinkable Cable Jointing Kit (Indoor/Outdoor Type) Suitable for XLPE 3x120 Sqmm with Supply. (including the cost arrangement of labour, T&P, carrier etc. required for proper completion of work) 22 SafecarriageofCT/PTPoleMountingUnitanditsproper installationondoublepooleafterfixingofchannelwithM.S. clamps and nuts & bolts for holding the channel angle etc. The unitbodyshallbeearthedbyconnectingM.S.Stripofsutaible size finallyconnectedtoearthingrod.11 KVline shall be connected tounit as per instructions of SDO / AE(M). The M.S. Strip & earth rod shall be included in the scope of work. 23 Safecarriageof11KVPilferProofMeteringCubical sutaible size anditsproperinstallationatpitsiteasperRESSPO Manuals 24 SafecarriageofEnergy Meter 10-60A 3 Phase 4 Wire anditsproperinstallationatpitsiteasperRESSPO Manuals 25 Installation & Fixing of following accessories. includingthecostoflabour, T&P and carrier etc. required for proper completion of work. 26 Dropper Channel 27 Danger Board 28 33 Kv Top Channel 29 MS Top Channel 30 MS T-Off Channel 31 11 Kv Cross Arm Clamp For PCC Pole 32 11 Kv F Clamp For PCC Pole 33 11 Kv DP Clamp For PCC Pole 34 33 Kv Stay Clamp For 11 Mtr STP 35 Cross Arm Holding Clamp For STP 36 11 Kv Pin with Nut 37 33 Kv Composite Polymer Pin Insulator 38 11 Kv Composite Polymer Pin Insulator 39 11 Kv Pin Insulator with Pin 40 33 Kv Polymer Disc Insulator (B&S) 70 KN 41 33 Kv Steel Cross Arm 42 11 Kv Disc Fitting (B&S) 70 KN 43 11 Kv Disc Fitting (T&C) 45KN 44 11 Kv Polymer Disc Insulator (T&C) 45KN 45 11 Kv Cross Arm V type 46 11 Kv TPMO 47 11 Kv Fuse Set 48 TF Base Angle 49 Nut Bolt with Washer . Last date of submission for this tender is 2024-08-06. This is a Bolts tender in Etawah, Uttar Pradesh