Dakshinanchal Vidyut Vitran Nigam Limited

Dakshinanchal Vidyut Vitran Nigam Limited has published Tender For Deposit Work In The Area Of Edsd-Laxminagar Under Edd-Iii, Mathura, 1 Carriage of 8.5 Mtr Long PCC Pole from 132 KV Store Center Mathura to site of work through the Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-70Kms.) 2 Carriage of 9/11 Mtr Long ST Pole from 132 KV Store Center Mathura to site of work through the Kacha and Pakka road including the work of its loading and unloading at the respective ends including the cost of arrangement of labour, T&P, carrier etc. required for proper completion of work.(Distance 00-70Kms.) 3 Carriage of 16 KVA Transformer from Store Centre, Mathura to site of work with loading & unloading at both ends 4 Carriage of 25 KVA Transformer from Store Centre, Mathura to site of work with loading & unloading at both ends 5 Carriage of 63/100 KVA Transformer from Store Centre, Mathura to site of work with loading & unloading at both ends 6 Carriage of 250 KVA Transformer from Store Centre, Mathura to site of work with loading & unloading at both ends 7 Carriage of 11 KV XLPE Cable size 3x70/3x120 sq.mm. Cable form Store Center Mathura to pit site including loading & unloading at both ends. 8 Carriage of 11 KV XLPE Cable size 3x185/3x300 sq.mm. Cable form Store Center Mathura to pit siteincluding loading & unloading at both ends. 9 Carriage of Line material i.e. conductor, G.I. wire TPMO stay rod, disc insulator, cross arm, Angle channel and other required material from Store Center at 132 KV substation Mathura to the site of work including loading and unloading of material at both ends. 10 Erection of single pole structure 8.5 Mtrs on PCC Pole by digging of pits fitting of all relevant accessories as per RESPO norms. 11 Erection of single pole structure 9/11 Mtrs on ST Pole by digging of pits fitting of all relevant accessories as per RESPO norms. 12 Erection of Double pole structure 8.5 Mtrs on PCC Pole by digging of pits fitting of all relevant accessories as per RESPO norms. 13 Erection of Double pole structure 9/11 Mtrs on ST Pole by digging of pits fitting of all relevant accessories as per RESPO norms. 14 Installation of stay set with grouting and nuzzling etc. as per RESPO drawing along with all routine material to be used for such works. 15 Earthing of poles by fixing earthing rods and binding with earth wire as per standard norms including cost of labour T&P and required material for such work. 16 Laying, sagging stringing and binding of ACSR Weasel Conductor on the erected PCC pole/STP including jumpering as per RESPO manual. 17 Laying, sagging stringing and binding of ACSR Dog Conductor on the erected PCC pole/STP including jumpering as per RESPO manual. 18 Laying, sagging stringing and binding of Arial Bunch Conductor on the erected PCC pole/STP including jumpering as per RESPO manual. 19 Laying, sagging stringing and binding of LT PVC Cable on the erected PCC pole/STP including jumpering as per RESPO manual. 20 Laying of 11 KV XLPE Cable size 3x70/3x120 sq.mm. in the trench/G.I pipe/HDPE pipe and re-dressing of trench after laying of XLPE Cablefor proper completion of work as per direction of supervising engineer. 21 Laying of 11 KV XLPE Cable size 3x185/3x300 sq.mm. in the trench/G.I pipe/HDPE pipe and re-dressing of trench after laying of XLPE Cablefor proper completion of work as per direction of supervising engineer. 22 Filing of cable box as suitable size as per direction of supervising engineer. 23 filing of Straight through as suitable size as per direction of supervising engineer. 24 Chopping of Tree branches to Clear the route properly. 25 Mounting of 16 KVA Transformer on the Double pole/Plinth structures and connections thereof. 26 Mounting of 25 KVA Transformer on the Double pole/Plinth structures and connections thereof. 27 Mounting of 63/100 KVA Transformer on the Double pole/Plinth structures and connections thereof. 28 Mounting of 250 KVA Transformer on the Double pole/Plinth structures and connections thereof. 29 Cutting of CC Road for making depth foundation for erection of pole. 30 Installation of 11 KV CT/PT Combined metering unit on existing double pole structure of large & heavy, power consumers to avoid possibility of theft of energy & 11 KV feeders at 33/11 KV sub- station including the cost of accessories (Nut & Bolt, PVC Tape etc.) required for proper completion of work also provided by the contractor. (including carriage of New 11 KV CT/PT combined metering unit from Store Center Mathura to Site of work.) 31 Fixing of meter pilfer box (service connection meter holding capacity) including its carriage from Electricity Store Centre Mathura to site of work including grouting of meter pillar box in ratio 1:4:8 cement, sand and brick ballast as per standard norms. 32 Guarding of 11 KV line by laying two nos. GI wire parallel and fixing of lacings (tilli) at a distance at 2-3 mtrs. as per direction of supervising engineer/RESPO manual. It includes the cost o f labour T&P carriage etc required for proper completion. 33 Fixing of Distribution Box on erected PCC Pole. 34 Re-sagging of loose H.T/L.T line as per direction of supervising engineer. It includes the cost of labour, T&P etc required for proper completion of work.(work will be done inside and outside of village) 35 Dismantle of old/damaged ACSR weasel conductor/G.I. Wire from the existing line and its bundling and stacking in roll and send to J.E. Store/ Mathura Store. 36 Straightening of tilted Single pole at various places by straighteningof pole including the cost of labour ,T&P charges required for proper completion of work (inside/outside village) 37 Neutral/Body Earthing of distribution transformers. It includes digging of pit upto water level depth and then inserting 32 mm dia GI pipe of “B” grade, confirming to the requirement of IS specification and then connecting the top of the inserted pipe by MS flat of size 50x3.3 mm or appropiate size with the help of nut and bolt or through welding, as per direction of Supervising Engineer. It includes the cost of all material, labour, T & P cartage etc. required for proper completion of work.The aforesaid work shall be carried out as per RESSPO norms.. 38 Constructions oftransformer plinth of size 5.5x5.5x6 feet, with the help of first class brick and masonary in the ratio 1:4 cement & sand coarse. Filling the structure completely as per norms with RCC top 1:2:4 cement, sand coarse and stone grit with MS Bar and MS channel for resting transformer wheel (100x50x1650mm) and plaster. All material shall be provided by the contractor. Old good conditioned bricks, stronegrit and MS bar/MS channel etc will be used after approval of Supervisory Engineer to lower the cost of work. Work includes Removal of T/F from old plinth and re-energize the T/F on earth safely till new plinth construction. Then after remounting the T/F on newly constructed plinth and making all connections to energize the T/F. 39 Providing and fixing of welded wire mesh fencing around transformer plinth with MS Angle of size 40x40x6 mm length and 1.20 mtrs height. Such panels shall be supported on MS angle from of size 40x40x6 mm having 04 nos corner supports of height 1.65 mtrs including extended legs for grouting which will be used as a door for entry of the personnel or removal/shifting of transformer with welded hinges, sliding belt etc for lockingarrangement as per drawing and specifications. The fencing will be painted in the green colour synthetic enamel paint after painting with one coat of red oxide primer. The rates should be inclusive of all materials required for completion of above work. (Length of each fencing approx. 11 mtrs) with T& P labour etc. . Last date of submission for this tender is 2024-10-10. This is a Civil Work tender in Mathura, Uttar Pradesh