Agra Development Authority

Agra Development Authority has published Tender For Wire Fencing, Tiles, False Ceiling And Repair Work In Commissioner Camp Office. - Providing barbed iron wire fencing including fixing it to post after stretching it including labour and tools and plants etc. required for proper completion of the work also including supply of wires and excluding supply of posts. (DSR 2023 Item No. 16.18.1) 2 Supply and fixing ofBamboo fencing 7high 1.5dia half circle bamboo including back frame and back support with balli/Bamboo with prepration of pit and filling including s/o all material labour T&P etc as per direction of E/I. (DSR 2020 Item No. 9.110 Horticulture) 3 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (Item No. 6.1.1 DSR 2023) 4 12mm Thick cement plaster1 cement : 4 Coarse sand (Item No. 13.4.1 DSR-2023) 5 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (Item No. 13.80 DSR 2023) 6 Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface (Item No. 13.111.1 DSR 2023) 7 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqmincluding grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (Item No. 11.41.2 DSR 2023) 8 Supply Laying of 80 mm I Shaped (Zigzag) rubber moulded gray precast Interlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.50kg) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work. (Cha.-20 S.I No. 17 E, SOR 2023-24 9 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work (Item No. 13.61.1 DSR 2023) 10 Engaging of carpenter for wooden work. (As Per SOR 2023-24 & Ch-2 S.I. 3) 11 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as requiredIn gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (Item No. 10.25.2 DSR 2023) 12 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (Item No. 4.1.3 DSR-2023) 13 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spacedjoints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.52.1 GI Metal CeilingLay in plain Tegular edgeGlobal white colour tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made ofG I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. (DSR-2023) 14 Finishing textured on walls with all complete, materials and labour as per direction of E/I.(P.S.R.) 15 Supply and fixing of recess mounting round 15 to 18 Watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT-AAA (Elc. Item No. 1403 SOR 2018) . Last date of submission for this tender is 2025-08-30. This is a Wire Fencing tender in Agra, Uttar Pradesh